Note 1054952 - Singapore Family Dependant scenario: Deletion is not working

Hi,
As per SAP 1054952, Solution below describes about Correction in FPM configuration.
Please confirm if i have to check, the correction in FPM configuration will i require Self-Service Administration (SSA) Business Package deployed on portal or there is some other procedure as well?
Heading 1: h2.*Solution:
Dispatch event associated with 'Delete' was not correct. Correction is done in FPM configuration of singapore Family Dependants scenario.*
Thanks,
SJ

Thanks Suresh,
Yes, I agree the Note has specification about SP 10,
Currently Portal is at SP 14 and the issue is still appearing.
A OSS have been raised and as per OSS updated, we have been recommended to check if the changes have been taken place?
Currently we donu2019t have SSA deployed on Portal, before asking Basis team to deploy SSA BP, I want to confirm if I will need SSA BP to check the changed mentioned in SAP Note 1054952 or it can be check by some other mean?
Regards,
SJ

Similar Messages

I have a MacBook Air using Maverick. I have files in the trash I want to recover. I do not have "Put Back" and Command Delete does not work.

I have a MacBook Air using Maverick. I have files in the trash I want to recover to their original files. I do not have "Back Up" and "Command + Delete" does not work.

Drag them out of the Trash and put them in their original location. Put Back may work on one file at a time.

MTO Scenario - Deletion flag not active in Production order

Hi,
I have a production order with MTO scenario, even if the order is CRTD status, i could not set the deletion flag to the order. Deletion flag activate and revoke options are grayed. What could be the reason for that..? how can i set the deletion flag to that order now..?
Thanks in Advance,
V.S.Sabitha

Hi,
My status is CRTD PRC MANC SETC.
The status profile header field is 'Blank' for my order type in spro settings.
In BS22 for I0076, BFRZ - Revoke status 'Released' is set to 'Forbidden' radio button.
Only for the MTO material, i could not activate the deletion flag. For other materials, the deletion flag option is active both in Created and Released status.
Sabitha

Note 543544 - SUS: Extended Classic Scenario for EBP not supported

Hi,
I am trying to get more information on SUS implemenation with ECS, I am aware of this note 543544 and its limitations for ECS in creating invoices and confirmations. But I wanted to know if any one has implemented SUS with ECS and also created invoices in SUS.
Please share your ideas.
Thanks,
Sreedhar

Our scenario is, SRM 5.5, ECS, Confirmations and Invoicing in SRM.
So, I am trying to analyze if MM-SUS or SRM-SUS will be a goo fit for us. But I came across note "543544 - SUS:ECS for EBP not supported" and I am trying to figure out what would be the best way to implement SUS.
Option # 1: If I implement SRM-SUS - I can do POR, PO changes and all PO related activity without conf and invoices. I am not worried about confirmations, our requirement for SUS invoicing is a must. So is there any way to achieve this as is or with IMS?
Option # 2: MM-SUS, but how to do this? since the leading PO, conf and invoicing all are done currently in SRM.
Please share your ideas.
Thanks,
Sreedhar

Icloud notes on my windows 7 PC deletes new notes and all my typing is lost

Hi All,
I have spent 2 hours typing a long document into icloud notes on my Windows 7 PC. I could see the time updating on the left hand side in the notes list for my current note. I also saw the note appear on my iPhone 5, but I did not open or edit it.
After I had finished and reread the long note I clicked on the second note on the left hand side to read that note and the first note I had been working on disappeared completely from the notes list.
This is the fourth time that iCloud Notes has lost my long note.
I write long legal emails into iCloud notes so that I can get up from my PC, take my iPhone or iPad away from my desk and still be able to work on the email. When I finally finish the long note I copy it from notes into my email and send it to the lawyer.
Can anyone help me to recover my long note? Ive spent hours on it.
Also can Apple please fix this bug , it is very frustrating
A long note for me is 3 pages of writing in Word.

Hello janna101
All you need to do is have iCloud Control Panel installed on your PC and turn on the Photos option once you have signed in. After that, just check in your Pictures folder and there will be a section for My Photo Stream.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Regards,
-Norm G.

ESS Family/Dependent

Hi,
1. May I know if there is a country specific (Singapore) ESS for Update Family/Dependent (ITS version) ?
2. If there is, how do I call it, i.e what is the corresponding transaction (I intend to call via https://its../scripts/wgate/<transaction code>/!) ?
3. How to control which field to hide/display on ESS ? Is it via the view V_T588M_ESS ? I am not sure the function group/workarea to input.
Many thanks in advance.
Regards
Kir Chern

Hi Kir,
1. For Singapore it's 25.
2. Transaction for FAmily/dependant persons is PZ12 .
3. The function group for the abve is EHR6
 This contains 2 function modules, one for List and one for detailed display.
 After making necessary modifications you have to assign
 the fn module in the View T77WWW_SC.
PZ12 2 25 HR_ESS_FAMMEMBERSGDETAIL_25 X
PZ12 2 25 HR_ESS_FAMMEMBERDETAIL_25 X
Hope it helps.
Rgds,
Jayvee.

Family sharing with apple ID not primary iCloud ID

hi! before family sharing existed, we set up a new apple id in iTunes (a gmail address) for my children to share so they could have the same purchases on their iPads. they also had their own unique apple id's for mail, contacts, etc. now that we're trying to work with family sharing, how do we accept the invitation for this account, as it's not technically associated with an iCloud account. their iPads, my mac, my iPad and phone all have our own iCloud accounts. from what i've read, the recipient of the invitation needs to be logged into their account on a device or a mac, but i suspect it means logging in to iCloud in order to accept the email invite, not just logging into iTunes. but if i do that on my mac or other device, it wants to delete everything else from my primary apple ID account. is there a way to accept the invitation in an email if it's not a primary iCloud email?

yesterday i've played with that issue also. Here are my results:
When you assign an appleid to your user account, you have to verify it's properly linked. You can do so by going to the users & groups pref pane. unlock it and right click on your user account. You should see "additional options" then. Go for it. Now take a look to the "Aliases" Section. You should see the mail adress of your linked appleid there. right below there should follow a line, starting with "com.apple.idms.appleid....". This seems to be some kind of Unique ID of your AppleID. If this entry is present, your AppleID is correctly linked to your account. If there is only the mail adress, the linking was not successfull. In this case, make sure you have Internet connection. This is important, because the information of the AppleID must be taken from apple's servers. so if you link the AppleID without Internet Connection, it will not work at all. After you have ensured a working internet connection, remove and reassign the AppleID to your account. After that, the entries should be OK.
When you have done this on both computers, you now should be able to connect a remote computer using your AppleID. But only for Filesharing. Screen Sharing seems not to work this way at the moment. I have played around about 2h yesterday without finding a clue to get this authentication method working.
After reading around in the web for a while, i found several posts which indicate that this feature only work, if you connect to the other mac using the IP Adress and not the hostname. Because i personally do not have the possibility to check that at the moment, maybe someone else can check this. Just go to safari and enter "vnc://IPofRemoteMac" in the adress bar. Connection should be established using IP adress then. Maybe this works
Message was edited by: JohnDoe1978

My contacts on my old Iphone I gave a family member were deleted then synced to icloud. My current iphone lost all its contacts when it next synced. I retreived a 6mth old backup to get my contacts, but I want my recent messages back, any help?

My contacts on my old Iphone I gave a family member were deleted then synced to icloud. My current iphone lost all its contacts when it next synced. I retreived a 6mth old backup to get my contacts, but I want my recent messages back, any help?

The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts. Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
Otherwise the deleted contacts are gone.

JDBC Scenario: Delete all the existing records and Insert

Dear All,
Scenario: IDoc to JDBC
PI need to delete all the existing records in the SQL table then need to insert the records.I have created a two statements in the target structure.
Statement1
   -> TableName
       -> action : DELETE
       -> Table : TableName
Statement2
   -> TableName
       -> action : INSERT
       -> Table : TableName
       ->Access
           -> Elements
I am getting below error while try to delete the records in the table.
JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'Tablename' (structure 'Statement1'): java.sql.SQLException: FATAL ERROR document format: structure 'Statement1', no key element found
Note: we use above structure in the another interface without specifying any Key for Delete operation(Server is same but different database for this two interface) and it works fine. Although the Primary keys has been set in the SQL table i am getting the above error.
let me know what are the setting need to make in PI and SQL DB to achieve this.
Regards,
Manikandan Shanmugam
Edited by: Manikandan Shanmugam on Nov 8, 2011 6:19 AM

The straucture what you have deined for Delete is not correct, you should have key field in statement structure then only you can perform Delete operation.
refer below link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b6e85fde93673e10000000a114a6b/content.htm
Regards,
Raj

Other database delete is not working on forall statement

Dear all,
My scenario is , i create a program, the program fetch the data from database x and i want to delete on the same x database but i am running this program at y database, so
so i created a view
create or replace view vw_ibs_pda_bills_x as
SELECT *
 FROM ibs_pda_bills_x@testarch1my program
Declare
 CURSOR c2 IS
 SELECT *
 FROM vw_ibs_pda_bills_x
 WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
 opr varchar2(10) := 'DELETE';
 TYPE tsch IS TABLE OF c2%ROWTYPE;
 vtsch tsch;
 cnt NUMBER := 0;
 stime NUMBER;
 etime NUMBER;
 DURATION NUMBER;
 rcount NUMBER;
 errorsd PLS_INTEGER;
 ecode NUMBER;
 val1 VARCHAR2 (100);
 val2 VARCHAR2 (100);
 val3 VARCHAR2 (100);
 val4 VARCHAR2 (100);
 BEGIN
 BEGIN
 stime := DBMS_UTILITY.get_time ();
 OPEN c2;
 LOOP
 FETCH c2
 BULK COLLECT INTO vtsch LIMIT 1000;
 IF vtsch.COUNT = 1000
 THEN
 cnt := cnt + 1;
 END IF;
 If opr = 'INSERT' Then
 FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
 INSERT INTO dlul.ibs_pda_bills
 VALUES vtsch (i);
 Else
 FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
 Delete from vw_ibs_pda_bills_x where bill_month = vtsch(i).bill_month;
 End if;
 EXIT WHEN c2%NOTFOUND;
 END LOOP;
 etime := DBMS_UTILITY.get_time ();
 DURATION := ((etime - stime) / 100) / 60;
 rcount :=
 (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
 If opr = 'INSERT' Then
 INSERT INTO process_stage_log
 VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
 Else
 INSERT INTO process_stage_log
 VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
 End if;
 CLOSE c2;
 COMMIT;
 EXCEPTION
 WHEN OTHERS
 THEN
 errorsd := SQL%BULK_EXCEPTIONS.COUNT;
 IF errorsd > 0
 THEN
 FOR j IN 1 .. errorsd
 LOOP
 ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
 val1 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
 val2 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
 val3 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
 val4 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
 If opr = 'INSERT' Then
 INSERT INTO process_error_log
 VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
 'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
 Else
 INSERT INTO process_error_log
 VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
 'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
 End if;
 END LOOP;
 END IF;
 END;
 END pda_insert;the program want to do the delet option for all delete is not working. The program executed successful but the operation delete is not happening
how to solve this issue.
please help me
kanish

No error encountered in my log table
the new workaround you said, that is instead of for all , already i tried for i in 1.. to like
instead of forall delete i tried the following way
Declare
 CURSOR c2 IS
SELECT *
 FROM ibs_pda_bills_x@testarch1
 WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
 opr varchar2(10) := 'DELETE';
 TYPE tsch IS TABLE OF c2%ROWTYPE;
 vtsch tsch;
 cnt NUMBER := 0;
 stime NUMBER;
 etime NUMBER;
 DURATION NUMBER;
 rcount NUMBER;
 errorsd PLS_INTEGER;
 ecode NUMBER;
 val1 VARCHAR2 (100);
 val2 VARCHAR2 (100);
 val3 VARCHAR2 (100);
 val4 VARCHAR2 (100);
 BEGIN
 BEGIN
 stime := DBMS_UTILITY.get_time ();
 OPEN c2;
 LOOP
 FETCH c2
 BULK COLLECT INTO vtsch LIMIT 1000;
 IF vtsch.COUNT = 1000
 THEN
 cnt := cnt + 1;
 END IF;
 If opr = 'INSERT' Then
 FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
 INSERT INTO dlul.ibs_pda_bills
 VALUES vtsch (i);
 Else
 /* fORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
 Delete from vw_ibs_pda_bills_x where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');*/
 for i in 1..vtsch.count loop
 delete ibs_pda_bills_x@testarch1 where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');
 end loop;
 End if;
 EXIT WHEN c2%NOTFOUND;
 END LOOP;
 etime := DBMS_UTILITY.get_time ();
 DURATION := ((etime - stime) / 100) / 60;
 rcount :=
 (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
 If opr = 'INSERT' Then
 INSERT INTO process_stage_log
 VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
 Else
 INSERT INTO process_stage_log
 VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
 End if;
 CLOSE c2;
 COMMIT;
 EXCEPTION
 WHEN OTHERS
 THEN
 errorsd := SQL%BULK_EXCEPTIONS.COUNT;
 IF errorsd > 0
 THEN
 FOR j IN 1 .. errorsd
 LOOP
 ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
 val1 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
 val2 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
 val3 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
 val4 :=
 vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
 If opr = 'INSERT' Then
 INSERT INTO process_error_log
 VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
 'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
 Else
 INSERT INTO process_error_log
 VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
 'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
 End if;
 END LOOP;
 END IF;
 END;
 END pda_insert;i am receiving the following error
ORA-02055: distributed update operation failed; rollback required
ORA-06531: Reference to uninitialized collection
ORA-06512: at line 77
ORA-06531: Reference to uninitialized collection
kanish

"Deletion Indic. not set in BE"

Hi,
Does anybody came accross 'Deletion Indic. not set in BE' seletion criterion on BBP_GET_STATUS_2.
Surprsingly, their exists no code in the program which is using this parameter 'be_del' and their are no OSS message for the same.
Any ideas on this one.
Regards,
Piyush Garg

Hi
Which SRM version are you using ?
We are using SRM 5.5 version. No problems, there is not any code for the field "be_del" as such. We have not faced this problem yet.
Please provide the detailed process to show how to replicate the steps.
Meanwhile, Have a look at the following relevant SAP OSS Notes.
Note 1040917 - BBP_STATUS_READ: Error messages are not deleted
691569 - Error messages in BBP_GET_STATUS_2
Note 890319 ActualValues in SC from back-end documents are not deleted
989891 BBP_GET_STATUS_2: Incorr quantity determination in back end
1040847 Requirement is removed from sourcing after BBP_GET_STATUS_2
1012124 SHP not reappear in SOCO after backend PO delete
1032713 BBP_GET_STATUS_2: incorrect sourcing indicator
757625 Incorrect Status I1112->analysis report
755769 Status I1113, no item or header relations->analysis report
994314 PO appears twice in applet preview in limit SHP
949162 Follow-on documents exist, status I1111 and I1113 active
947198 IMS monitor: Web Dynpro with hierarchies
922575 BE_REFOBJ and BE_REFOBJ_ITEM filled during Confirmation(SUS)
844209 BE_REFOBJ is filled at confirmation
798044 Correction for object links missing between SC and BE docs
776921 Display of deleted purchase orders on history screen
723680 Corrections in the mapping of SAP XML messages
723594 SRM 4.0 XML confirmation mapping error
662411 BBP_GET_STATUS_2: Too many database updates
651040 No update of shopping cart after reversing goods receipt
638505 Delete shopping cart item: Status stil active
604420 Composite SAP note SRM 3.0 SP1 group
626109 Enhancement BBP_PD_SC_REF_GETLIST for local bid invitations
619897 EBP 3.0: local SC reporting and SC status
576555 Perf: BBP_GET_STATUS_2/Confirmatn for only Classic Scenario
578033 Item from the shopping cart are deleted in backend
573202 'Buffer table not up to date' for APPEND at tables
570440 Problems with Delete/Restore of back end documents
551276 Too many database updates in BBP_GET_STATUS_2
498899 Correction instructions for EBP 3.0 in Note 436151 incorrect
422697 Change of structure 'BBPS_SC_REFUPDATE'
459422 EBP SC Status: Backend PO delete indicator set at random
501052 Deleted purchase orders not displayed in the history
513034 History for an extended limit purchase order in test status
417334 EBP/BBP: Deletion of requisition not displ. when UOM wrong
426444 BBP_GET_STATUS_2: Dump
Do let me know.
Regards
- Atul

I just updated to iOS7 and an old appleid popped up. My old password is not recognized so I can't delete the account or turn off find my iphone. The old appleid is linked to an email I don't have anymore, and answers to my security ?'s aren't recognized

I just updated to iOS7 and an old appleid popped up. My old password is not recognized so I can't delete the account or turn off find my iphone. The old appleid is linked to an email I don't have anymore, and answers to my security ?'s aren't recognized. Is there any way I can reset my account to my new appleid? This has happened to every iphone and ipad in my family that has updated to iOS7.

Hi mabaker2,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
Cheers,
- Judy

Why do i have a family plan when i did not sign up for a family plan i feel like what ever walmart employee helped me should have showrd more concern and information to show me of and espically explained nmy plan

Mad customer

You would have to be more specific. You though you were getting only one phone and you somehow have MORE than one phone???? If you only have one phone, you are not on a Family plan. You may be on the More Everything plan, but you can only have one phone and still be on the More Everything plan. You do not have to have multiple phones to be on the More Everything plan. It all depends on how you want to use the phone.
Yes, Verizon has single line plans, but they do not have all of the same features as the More Everything plan. Single line plans are not the best solution for all customers who only want one phone.

Epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

You have no choice but to lose your data back to the last backup you made.
Here's how to do the recovery. Note you may have to try to get into recovery mode more than once to succeed:
HT1808
I'm sure next time, you'll be more vigilant about keeping current backups.

My daughter purchased a movie that I approved (Family Sharing) however, it is not showing up in my iTunes account so that we all may watch it on TV?

My daughter purchased a movie that I approved (Family Sharing), however, it is not showing up in my iTunes account so that we all may watch it on TV?

As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.

Note 1054952 - Singapore Family Dependant scenario: Deletion is not working

Similar Messages

Maybe you are looking for