Note 121771.1 doesn't work

We created a form using Portal wizard and we need to validate a value when it is inserted trough that form. This value is validated under tolerance range stored in a DB table and it is generated by SQL that need parameters.
How we need to create the event in pl/sql like as the form validate the value and it insert
the value in the option "before to process the form" ?
The note 121771.1 shows an example but doesn't work. Any help?

What about clearSelection() in class JList. I guess you want to achive that no item is selected in a list ?

Similar Messages

Serial number not working, not disk doesn't work (mac copy)

I've just brought a new Mac Mini installed my Photoshop CS3 onto it. When I opened the application my serial number wouldn't work because I've used it too many times. My last computer crashed, so I can't take Photoshop off it. I followed a tutorial which had two options:
1. reset the clock on your computer uninstall and re-install.
2. delete the following folders in /Library/Application Support/Adobe: Adobe PCD, backup and caps. And re-install
Now when I try to install Photoshop CS3 it doesn't even install! There is a cross instead of a tick next to everything. I've tried repair disk in Disk Utilities, and I was told that there was nothing wrong with the CD.
Is there a way to fix this?

Now you are not even able to install the software and gettingthe red cross as soon as enter your serial number.
hence follow this step:-
1) Run the cleaner tool for CS3 , www.adobe.com/support/contact/cscleanertool.html
2) delete the files ;- /Library/Application Support/Adobe: Adobe PCD, backup and caps
3) Re-install the software ,
let us know if the software gets installed ,

Ipod Touch, Notes App doesn't Work?

The Notes App on my 1st generation Ipod touch doesnt work. When I open it up, it shows all my notes but I when I try to create a new note and click "done" it goes right back to the main screen. When I try to view my previous notes, their all mixed up. When I try to delete a note, it goes right back to the main screen.

The solution can be quite "devastating", if you have a lot of data on your iPod touch. So... do the restoration from iTunes. After the installation, iPod will connect to iTunes, and there is a screen asking if you want to make this iPod a "new" one, or restore your previous setting on there. Choose the "new" option, which is the first choice. Obviously, you will lost all the data if you have a lot. It is an absolute clean slate. and notes will work again.
Just a note for people who's updating to iSO 3.0: delete all the notes you have before updating. I think the file registration for the notes are all massed up after update.

Do Not Disturb doesn't work!

New iPhone 5S
iOS 7.0.1 (latest)
Do Not Disturb does NOT work! It still lets in calls. I have tried all the settings to no avail. Even selecting block every call, all the time, the moon icon is showing, but the calls still come through!
What the?! Come on Apple... this is not rocket science. I've embarassed myself in public settings because this easy feature is broken!

I think you are correct. Page 31 of the manual says:
Do Not Disturb
Do Not Disturb is an easy way to silence iPhone, whether you’re going to dinner or to sleep. It keeps calls and alerts from making any sounds or lighting up the screen.
Turn on Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap . When Do Not Disturb is on, appears in the status bar.
Note: Alarms still sound, even when Do Not Disturb is on. To make sure iPhone stays silent, turn it off.
Configure Do Not Disturb. Go to Settings > Do Not Disturb.
You can schedule quiet hours, allow calls from your Favorites or groups of contacts, and allow repeated calls to ring through for those emergency situations. You can also set whether Do Not Disturb silences iPhone only when it’s locked, or even when it’s unlocked.

Score: HyperDraw Note velocity doesn't work here

Any other encounters this issue?

I have LE 7.2.3 and Note Velocity does not show up in Hyperdraw.
In a book I have, Note Velocity is one of four options shown in the bottom panel of the Hyperdraw submenu - Channel Pressure, Pitch Bend and Program Change being the other three. Twelve options, plus "Other . . ." are shown in the upper panel. In my copy of LE 7.2.3, the only options that appear are the ones you've described. I suspect the others are Logic Pro only features, although I can find no mention of it.
Mac mini Logic Express

StageWebView Doesn't work on Android with Captive Runtme...

If I make an apk with the default setup (requires separate runtime download) it works, but not with captive runtime. I need captive runtime so that it can be accepted into Amazon Appstore.
StageWebView.isSupported appears to return true when run, and then it just doesn't work.
Is there any way around this? Will this work in the future?
I am probably just going to work around it and do without it for this release, but would like to see if anyone knows what the deal is with it and let folks know of the issue.
Edit: I have found that any usage of a StageWebView object not only doesn't work, but makes errors and breaks other parts of the app, so I have had to disable any usage of it...

I'm also using StageWebView, but I don't have the problems you mention. I am using Captive Runtime to compile my app and it's working fine in the Android Market (I haven't tried Amazon Appstore, though).
The version of AIR i'm using is 3.1. Are you using this version?

"HAVING NOT LIKE" isn't working

When I wanted to sum the value of all inputted device data except one type I had to put this...
SELECT AttributeName, DateAdd(minute,-5,System.TimeStamp) as WinStartTime, system.TimeStamp as WinEndTime, DeviceId, Avg(Value) as Value, Count(*) as EventCount
FROM input
GROUP BY TumblingWindow(minute, 5), DeviceId, AttributeName
Having 'OK' = CASE
WHEN AttributeName LIKE '%/pir/%' THEN 'PIR'
ELSE 'OK'
END
...instead of simply saying...
SELECT AttributeName, DateAdd(minute,-5,System.TimeStamp) as WinStartTime, system.TimeStamp as WinEndTime, DeviceId, Avg(Value) as Value, Count(*) as EventCount
FROM input
GROUP BY TumblingWindow(minute, 5), DeviceId, AttributeName
Having AttributeName NOT LIKE '%/pir/%'
It accepted the "NOT LIKE" version, but didn't produce any output.
Does anyone understand why NOT LIKE doesn't work in this scenario?
Thanks in advance,
Peter
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

Hi Peter,
Could you please try your scenario again? We deployed a service change recently which should support this scenario.
We have a different issue where testing of queries in the browser (without starting a job) does not have this fix yet, that change should be rolled out as soon as it is ready.
Zafar
Zafar Abbas

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

My netflix account used to work, but now it does not. Only the "my account" page is accessible and not the main page. Major problem. Please help. I'd rather run an older version than one that doesn't work.

I believe I was running a 6.3.as.df,msad.f,masdf version of Firefox and my Netflix account was working wonderfully well. I happened to hit the quit button last time, instead of the save and quit button and for some reason, Netflix did not load properly. I cleared the day's history, as usual, and tried again. This usually works. I closed Firefox and tried to reopen it, but it said Firefox was already running, that I would have to restart my computer to solve the issue. I did that twice. Finally, I noticed Firefox was trying to download a new version -- even though I don't recall asking it to do so. Now I'm running 7.0 and my Netflix page doesn't work. I am logged in - great - but I can only access "My Account and Help" page and "Viewing History" but nothing else. Lame! I would love to know how to get this to work. I can't even pull up Netflix's main page on its own. All other websites seem to be working properly. PLEASE ASSIST!

If this were just a Netflix problem, why can I access Netflix through Internet Explorer and not through Firefox? I've been using Firefox to access Netflix for at least the past year and starting yesterday (12/6/11) Firefox doesn't seem to recognize that Netflix exists. I've tried the suggested Firefox "help" which was of no help whatsoever and may even have made life more difficult in accessing other accounts. Anyone know how to contact Netflix or Firefox by phone?

Wired connection doesn't work if cable is not plugged in at boot time

Hey all,
I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
Here's some information regarding the system:
It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
The router is a Linksys EA2700/N600
journalctl -u NetworkManager
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
ping -c 10 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
--- 8.8.8.8 ping statistics ---
100 packets transmitted, 24 received, 76% packet loss, time 99062ms
rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
#option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
#noipv4ll
#Disable IPv6
#noipv6rs
#noipv6
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=keyfile
dhcp=dhcpcd
## Set static hostname
#[keyfile]
#hostname=foobar
## HTTP-based connectivity check
#[connectivity]
#uri=http://nmcheck.gnome.org/check_network_status.txt
I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.

Try to use dhclient perhaps? Might I also suggest letting systemd deal with the dhcp issue and not NM. That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card. I'm no guru but I got thinking about this when I saw this in your output:
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt.

[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio

EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)

Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time:

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

I have upgraded to IOS5 and installed imessaging, it worked ok for a while and now it seems only to work occasionally or sometimes not at all. Is there any use in having software that doesn't work. I am not the only person who has this fault,

Hi , does anyone know how to fix the problem with imessages. Sometimes it works and more often than not it doesn't. I upgraded my iphone 3gs a couple of weeks ago and the imessaging worked splendidly but now it hardly works at all. Both my daughters have the same problem and it isn't the wifi coz they live in different parts of the country.
Any help on this matter would be apppreciated as its doing my head in
I have an iphone 3gs and my daughters have iphone 4's.
I have reset my iphine but to no avail
Regards
cfcspark88

Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

Note 121771.1 doesn't work

Similar Messages

Maybe you are looking for