Note 3 Photos/Gallery broken after Android 4.4.4 VVRUDNJ6 install

Verizon pushed Android 4.4.4 VVRUDNJ6 onto my Note 3 last night.  Now Skype doesnt work (fixed after reinstall).  Verizon Security doesnt work (dont know how to reinstall).  Worst, all photos in Gallery are unviewable. The camera works, but cant load neither old or new pics to view on the phone. The pics are seen in the Files. Problem exists for photos stored on phone and card.  Music stored on card is not messed up.  And movies stored on card can be watched, but the thumbnail pics are not loadable/seen.  This is horrible before the holidays when you want to take many pictures.  What is the fix, Verizon?!

majwilsonlion
Thank you for your feedback. Samsung has provided the following information after an investigation.
The best option to revert you photo viewing experience is to restore your device using a personal computer with the Software Repair Assistant tool and preserving your data in the process.
Alternatively you can remove corporate email account and then decrypt the device which will fix the issue. Then encrypt the device again if necessary (if re-adding corporate account)
Steps to Remove corporate email:
-Settings > Accounts > Microsoft Exchange ActiveSync > select the corporate account > select option menu > remove account
Steps to decrypt the device
- Settings > Security > Decrypt phone (you must have 80% or above battery charged)

Similar Messages

  • Photo gallery lost after 2.2 update

    Hi all! I received the 2.2 upgrade for my Moto DROID on 8/16. Everything seemed to be fine until the next day... my photo gallery of about 50 pics were missing!! I installed Astro from the market and I can see the 'files' but can't seem to figure out how to recover them. Found something on a different forum but was being told to "select them all and click delete". I realize I'm a techno-tard, but wouldn't 'deleting them' actually do just that?!  PLEASE, PLEASE! Can anyone help?!
    Thanks!

    I have provided some information below that may be helpful in recovering the pictures on your device. You do not want to delete them as this may permanently remove them from the device.
    Plug the Motorola Droid into your computer using the USB cable that came with your device. Once it is connected to (both your phone and computer), put it into the Mass Storage mode. I have provided that step in the article below: http://search.vzw.com/?do=viewdoc&id=27198
    2.      Once the Mass Storage mode is enabled, it will create a drive for you to access on your computer.
    3.      The photos should be in the DCIM folder under Camera. (***If they were downloaded images, they would be under the Download folder)
    4.      Try accessing the files on your computer to see if they come up. (***If they do, try pulling them into a file on your computer (to ensure you have them physically). I would also backup anything else on the card that you could possible lose at this point.
    5.      If the files show up, but you cannot view them, I would recommend removing and reinserting the SD card on the device. To complete this step, I have provided the instructions below:
    ****First unplug the device from the USB cable, and unmount the SD card. Select Menu > SD card & phone storage > Unmount SD card. Then follow the step below
    http://search.vzw.com/?do=viewdoc&id=26488&p=-1
    ****Once the SD card is out, it may be a good idea to soft reset the device as well. I have provided the article for that below:
    http://search.vzw.com/?do=viewdoc&id=26596&p=-1
    Insert the card and try to access the pictures once again. ***If it fails once again, and if you had backed up all of your files, I would recommend reformatting the card. *** This procedure will erase all data on the memory card. It is recommended to back up the data at this point if you have not done so already.
    To complete the format, please follow the instruction below:
    http://search.vzw.com/?do=viewdoc&id=26553&p=-1
    I hope this helps!

  • Spry Photo Gallery Broken Image Link

    I have attempted to merge the spry photo tutorial with our church's website. The images simply won't show up. It shows a broken image icon, but I can't understand why. I am wondering if the menu bar's javascript is interfering. Here's the code:
    Photo Gallery Page:
    http://gtcdunn.org/GTWebsite/HTML/Gallery1.html
    XML
    http://gtcdunn.org/GTWebsite/photos.xml
    Spry Assets:
    http://gtcdunn.org/GTWebsite/SpryAssets/xpath.js
    http://gtcdunn.org/GTWebsite/SpryAssets/SpryData.js
    Thanks so much for your help!
    ~Chris

    I see you are still using Spry 1.5. Have you considered upgrading to 
    Spry 1.6.1?
    Also your XML is broken, if you open up your xml in a normal standards 
    complaint browser such as firefox, you will see that it doesn't render
    a normal tree view as it would do with other xml files. So i suggest 
    checking those errors out.
    Its mainly because you  forgot to close your starting tag of the 
    gallerys node. (<gallery
    base = ""
    background = "#FFFFFF"
    banner = "#F0F0F0"
    text = "#000000"
    link = "#0000FF"
    alink = "#FF0000"
    vlink = "#800080"
    before your xml starts.

  • Video saved not in photo gallery?

    I recently uploaded a video onto my phone using a sync and I can view it in the videos folder when I go into my photos, but it is not in my camara roll where I need it to be. In order to upload it I need it to be in a camara roll. I have it saved on my computer, my itunes movies, and my google drive but I can't find a way to get it into the camara roll. Any suggestions?

    Photos and videos transferred from your computer are not and cannot be stored in the Camera Roll.
    Do you have Include Videos selected under the Photos tab for your iPhone sync preferences with iTunes?

  • Extremely simple photo gallery crashes after few tens of pics viewed... (ipad)

    Images are JPG, 300 - 350kb each, the thing crashes every time! not to mention that in future it was planned to pload few swf's instead of few jpgs there...
    package
        import flash.display.*;
        import flash.geom.Matrix;
        import flash.utils.*;
        import flash.net.URLRequest;
        import flash.events.TransformGestureEvent;
        import flash.system.Capabilities;
        import flash.system.TouchscreenType;
        import flash.ui.Multitouch;
        import flash.ui.MultitouchInputMode;
        import flash.events.*;
        import flash.utils.getDefinitionByName;
        import com.greensock.TweenLite;
        import com.greensock.easing.*;
        public class Base extends Sprite
            var pageCounter = 1;
            var controlsoff = false;
            var activePage;
            var previousPage;
            var total = 70;
            public function Base()
                loadNewPage("next");
                nextp.visible = false;
                prevp.visible = false;
                btn1.buttonMode = true;
                btn1.addEventListener(MouseEvent.CLICK, openbook);
            function openbook(evt:MouseEvent):void
                pageCounter++;
                loadNewPage("next");
                btn1.visible = false;
                arrow1.visible = false;
                nextp.visible = true;
                prevp.visible = true;
                nextp.buttonMode = true;
                prevp.buttonMode = true;
                nextp.addEventListener(MouseEvent.CLICK, slidenext);
                prevp.addEventListener(MouseEvent.CLICK, slideback);
            function loadNewPage(direction)
                previousPage = activePage;
                var loader = new Loader();
                loader.load(new URLRequest("full/"+pageCounter+".jpg"));
                loader.x = (pageCounter-1)*768;
                //newpage.cacheAsBitmap = true;
                activePage = loader;
                container.addChild(loader);
                TweenLite.to(container,1, {x:-(pageCounter-1)*768, delay:.5, ease:Cubic.easeOut, onComplete:removePage});
            function removePage()
                if (previousPage)
                    container.removeChild(previousPage);
                    previousPage.unload();
                    previousPage = null;
            // ----------------------------------------------- sliding to the next page  ------------------------------------------
            function slidenext(evt:MouseEvent):void
                if (controlsoff == false)
                    controlsoff = true;
                    pageCounter++;
                    setTimeout(function() {
                    controlsoff = false;
                    }, 1000);
                    loadNewPage("next");
                    if (pageCounter==total) {
                        nextp.visible = false;
                    prevp.visible = true;
            // ----------------------------------------------- sliding to the previous page  ------------------------------------------
            function slideback(evt:MouseEvent):void
                if (controlsoff == false)
                    controlsoff = true;
                    pageCounter--;
                    setTimeout(function() {
                    controlsoff = false;
                    }, 1000);
                    loadNewPage("prev");
                    if (pageCounter==1) {
                        prevp.visible = false;
                        nextp.visible = false;
                        btn1.visible = true;
                        arrow1.visible = true;

    Can't test this right now, but you keep creating new loaders, and those loaders all have a loader.content.  Can you keep a reference to them and then null those out?
    loader.content=null;
    container.removeChild(loader);
    loader=null;
    etc.
    Might help to see which object is hanging around.  It definitely sounds like a memory issue, though.  Something is not being cleaned up...

  • IWeb photo gallery not working!

    Hello everyone! I built my website using iWeb and it has been up and running perfectly for a few months now. But, then I decided to try and update it with photos of artwork. I uploaded all files to my web-host's server, and now the page shows, but not the photo gallery! Any ideas as to what happened? Here is the site & page. My web hosting company is looking at it, but they have yet to discover what the issue is.. Any advice you can provide is most appreciated!
    http://thelonebeader.com/ 
    http://thelonebeader.com/Places_portraits/Places_portraits.html

    You are missing a number of files from your website.  You can see which are missing by bringing up the Activity window (Command+Option+A) while viewing the Places page in Safari and looking at the list of files in the window.
    How are you publishing the site?  With iWeb?  If so then try using the File ➙ Publish Entire Site menu option to see if that will force those missing files to be uploaded. 
    If that doesn't work you can publish your site to a folder on your hard drive and use a 3rd party FTP client, like the free  Cyberduck, to upload the site files. If you have to continue to use Cyberduck this tutorial may help: #2 - Uploading Only Those Newly Published or Edited Files When Using a 3rd Party FTP Client.
    OT

  • How do I copy my photo gallery from android phone?

    I just purchased an Iphone 6 to replace my Samsung Android phone.  How do I copy my photo gallery from the Android to the Iphone?

    Move content from your Android phone to iPhone - Apple Support

  • Web Photo Gallery Descriptions

    I have just started playing with Web Photo Gallery.
    I built one with the Slideshow. I couldn't figure out where the descriptions were supposed to come from, I thought I could enter them in Bridge somewhere, but didn't figure that out.
    So, I opened them up in Dreamweaver and added descriptions to each of the files. Problem is that as the slideshow goes on, only the first description shows up, the rest, the file number changes, but not the description.
    What did I do wrong? What should I do next time?
    Thanks,
    Kirk
    PS, if you are curious, here is the slideshow that isn't working:
    http://www.dirt-dog.com/doghouse/

    You can enter the descriptions using the "File Info" properties for each photo, using Adobe Bridge or Photoshop. I have encountered a similar problem in that my descriptions were not always showing up in the pages generated by the Web Photo Gallery.
    After some investigation, I found that the descriptions were disappearing only for photos that had a Return / Line Break in the description. If you go back and make sure all of your descriptions are a single line, it works fine. This is a bug in the Web Photo Gallery code...you can see it in the Javascript code that it generates for each page.

  • Urgent - Php photo gallery built with web standards?

    Hi All,
    can you point me out a very simple php gallery that use valid
    code and css?
    Something with or without MySql db but with an administration
    panel and
    ready for use without any particolar tweaking.
    Not necessarily free, the important points are simplicity and
    quality.
    Thank you in advance for any info.
    Best regards
    Nicola

    You can enter the descriptions using the "File Info" properties for each photo, using Adobe Bridge or Photoshop. I have encountered a similar problem in that my descriptions were not always showing up in the pages generated by the Web Photo Gallery.
    After some investigation, I found that the descriptions were disappearing only for photos that had a Return / Line Break in the description. If you go back and make sure all of your descriptions are a single line, it works fine. This is a bug in the Web Photo Gallery code...you can see it in the Javascript code that it generates for each page.

  • Ios8.3 cant share photo to wechat in photo gallery.

    I Just upgrade my iphone 6 plus to ios 8.3, but having problem with the photo gallery sharing.after i taking photo i wan to share to wechat from gallery. It turn back to gallery.now i only can share photo bu open the wechat apps and share in side the apps.did u guy got same problem with me?and what can i do to fix it??

    I have this problem as well. Didn't notice it earlier, but I think it was the 8.3 update. Can't share anything to WeChat (safari, photos, etc.)
    Please fix.

  • Links get broken after adding photo gallery

    I discovered a strange problem when creating a website with photo gallery.
    I have a menubar with static links to all pages of the website which worked perfectly. Now after adding a photo grid the links of the my menubar are not clickable at all. This problem exists only if the photo thumbnail row is displayed. Do you have any ideas how to disable the thumbnail row automatically or any other workaround for this bug?

    I have the same problem. Please see http://www.campfieldhouse.co.uk/Campfield_House/Gallery.html The page links 1, 2 and 3 just don't work. This is all coded automatically and there are no options for this. Thanks

  • Photo gallery not displaying after site is published to .mac

    I would like to thank everyone who reads and responds to these posts. I would be completely lost without it. Apple is lucky to have such great forums. That being said, I need help again...
    I finally (thanks to much help) got both my websites up and running without interfering with each other in the publishing process. Now my second website http://web.mac.com/dkeesey01/CAAHA/Welcome.html or www.caaha.org is up but the photo gallery won't show. I published to a folder and it works fine, but it won't work in safari, firefox, or internet explorer.
    Thank you!

    Update iWeb to 2.0.4. It will solve a lot of problems.
    Then do *Publish all to MobileMe*.

  • I after updating to iOS 8 in photo gallery folder is missing.

    I after updating to iOS 8 in photo gallery folder is missing. Of what I can not be divided with old photos no one. There is a folder in which the recently added only recently added More Photos. How to return this folder?

    Hello Simmo1997,
    Sorry to hear about your issue but let’s see if we can get your iPhone back up in running. If your iPhone is disconnecting when trying to restore then check out the article below to get you started with isolating the issue. Let me know if it gets resolved or if you discover a new symptom. 
    iTunes: Resolve USB-related alerts
    http://support.apple.com/kb/HT5772
    Regards,
    -Norm G. 

  • In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer.  Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not progr

    In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer.
    Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not program it to create Photo Web Galleries that after uploading to my website would allow my friends to down load the pictures from the album to their computer. How could  I do it? Please step by step. Thank you   M. Mehdi Akhavein

    Are you producing HTML galleries with Lightroom (not Flash galleries)?
    Lightroom Help | Create web galleries in Lightroom

  • Photo Gallery not opening

    << Branched from an old discussion about photo gallery not opening >>
    I had a similar problem, only it was because i was in the phone deleting files that i thought i didnt want. UGH! I think mine was due to facebook and not syncing. My gallery would work, but the widget on the homescreen seemed frozen and when i tried to look at picture thru it, it said there was an error.
    I deleted facebook and then installed it again, somehow, getting better updates. I also took the widget off the homescreen for a little bit. After a reboot of the cellphone, and an update of facebook and new SYNCS, suddenly it is working again as it once did.
    I did NOT want to do a hard reset, it took along time to tweak my settings as i wanted them, so i opted out of it.
    Hopefully you have better luck than i did. It took me like a week to figure houw i was going to go around doing a hard reset.

    sorry, i forgot to say my firmware version is v3.0638.0.0.1

Maybe you are looking for

  • Need help in tuning a procedure

    DECLARE CURSOR Cur_sub_rp IS SELECT A.SUB_ACCOUNT, B.PH_basic_srv,B.PH_Salesman,A.SUB_SSN FROM STG_SUB_MASTER_MONTH_HISTORY A, STG_PHN_MASTER_MONTH_HISTORY B WHERE A.SUB_ACCOUNT = B.PH_ACCOUNT (+) AND A.MONTH_ID = B.MONTH_ID ; TYPE t_values_tab IS TA

  • Factory calendar issue changing validity date

    Hi, We have come across the OSS note 1532398 and 1529649. It's for our Solution Manager system. We are on SP24 EHP1 and i wanted to know how far up can you go in the validity date? I understand the holiday dates need to be changed first but how far u

  • [Solved] best dynamic DE/WM ?

    hello, i often use CLI applications in favor of GUI equivalents as they have often been far more stable, and are usually far faster. i love Screen-vs, yet in order to use the occasional GUI application (firefox) i have to use a rather messy system of

  • 1024 768

    Hello Is it possible to make a video ouput with 1024/768 not 1440 1080 in premier element 8 Thank you for help Philippe

  • AP does not associate with WLC

    the wlc send the log: Feb 11 10:31:48.263 spam_lrad.c:1048 LWAPP-3-DISC_INTF_ERR1: Ignoring discovery request received on non-management interface (2) in L3 LWAPP mode Any Idea? I review the network configuration and all is fine, I have 3 AP associat