Note 91488 - Solution Manager...
Hi everyone,
Any idea where I can find more information on the SAP Solution Manager Add-Ons mentionned on Note 91488 (Almost at the end of the document)
ST-BC: Basis Settings
ST-PL: Business Process Repository
ST-RM: Roadmaps
I need to find the installation files associated with the above Add-Ons and had no luck so far.
Thank you
Coco
HI,
Now it took me forever to find it..
follow this note >> 539977
and to get there: service.sap.com/installations
My Company's Application Components"
chose >> SAP SOLUTION MANAGER"
select >>> SAP SOLUTION MANAGER 4.0"
you will see >>> Plug-In Satellite System"
Thanks,
Similar Messages
-
Release Notes SAP Solution Manager 7.0 EhP1 - SP21 - SP23 available
Now available:
[Release Notes SAP Solution Manager 7.0 EHP 1 - SP 21-23|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000528082010E]
The document is published in the following folder with "Technical Information":
[http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&]
SP23 includes several new functions in the area "Application Incident Management", which have been requested by VARs.
Regards, RuedigerPlease see also this detailed presentation:
[SAP Solution Manager SP23 - New Functions for VAR Partners|http://service.sap.com/~sapidb/011000358700000580432010E] -
Search & Install SAP Notes using Solution Manager
Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank youDear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name Seq Field Val
URL_DISPLAY_NOTE 1 http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE 1 http://service.sap.com/notes
Regards,
Shyam. -
Checking SAP notes on Solution Manager
Hi...
I need to get a report with all the SAP notes applied in my ERP environment.
If I use tx code snote, on ERP, I can find this, but I need something on Solution Manager, like a report...
What can I do?!
Thank's in advance.Hi,
If you have already configured Diagnostics,(Solution manager Diagnostics - SMD and its a must for this activity), call Txn-> Solman_workcenter -> Root cause Analysis-> End to End Analysis->Select your system <SID>-> Change Analysis-> Select the Time Frame->goto notes ->Jump in-> to change Reporting ->Export the Result(if needed).
Or
Under RCA- Call system Analysis -> Change Reporting -> Select the instance and Get the suitable Extractor to get this :).
Hope this helps.
PS: If you have not configured Diagostics yet, Do configure it in first place, other wise, you don't have an option in solman and had to ge the individual reports from remote/satellite systems :(.
Kindly revert for any issues.
Thanks,
Jagan -
CHARM Tab does not appears -- solution manager
Hi Experts,
I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
Also tx solar01 is locked! the project doc for example . But in scope a have not checked the link.
Any clue?Hello,
In SOLAR_PROJECT_ADMIN are you creating a project or runing an analysis?
The Analysis screen is not tabbed, it is a tree.
Change request management apears under Solution.
When you create a project, there is not a Change Management Tab.
So are you refering to creating the project or performing the Analysis?
Regards,
Paul -
Hi
I am new to Solution Manager. can any one you could kindly help me out with some notes / PDF's on Solution manager
Thanks in advance.
SriniHi Srini,
You have the whole world of docs at the below Links.
https://websmp103.sap-ag.de/solutionmanager --> You would find the insdtallation guides, release strategies and technical papers in Media Library.
https://websmp202.sap-ag.de/rkt-solman --> You would find the road maps for elarning solman.
Hope it helps.
Br,
Sri
<i>Award points for helpful answers</i> -
How to revert a report run in Solution Manager?
Hello All:
As per Note 1119150 - Solution Manager: EHP 3 product data missing, I ran this report RS_SMSY_PPMS_XML_UP_DOWNLOAD,
My bad, this was for Solution Manager 4, I ran this in Solution Manager 7.
Product Version got changed once I ran this report.
Is there any way to revert the changes done by this report?
Please let me know.
Thanks a lot for your time guys!!
Cheers,
-SaiHello Sai,
SAP Solution Manager release 4.0 and release 7.0 are one in the same.
There is a note that will confirm this assertion.
1122966 Maintenance Optimizer: Notes for Enhancement Packages
Indeed it is referenced in the footer of SAP Note 1119150
Note 1122966 States: SAP Solution Manager 4.0 is officially renamed on May 1st, 2008 and
becomes SAP Solution Manager 7.0.
Note 1119150 was released in 2007, so this was before the name change.
Since this note applies to the release and not to a a particular SP level, it is completely valid for Solution Manager 7.0 as 4.0/7.0 are interchangeble terms.
However the reason to run the report attached to the Note is because product version 'SAP ENH PACK 3 for SAP ERP 6.0' is missing. Is this what the product changed to, because if it did, then it is correct. What did the product version change to because you may find that you can now select the correct product, if it was missing before...which would be the only reason to have run the report.
If the product version was missing, its likely a matter of just going back in and changing the product to the newly downloaded one that was missing. If it wasn't missing, then the report should not have been run, as the reason for applying the note instructions did not apply, and you may need to involve SAP support to assist in a resolution.
My thoughts are since the note does apply to SAP Solution Manager 7.0, so does the attached report, and perhaps this has shuffled the product list, without moving the pointer correspondingly, so it is now pointing to the worng product. But I suspect now the correct product is in the drop down selection list. This is just a thought as to why the product changed.
Hope it helps to resolve.
Regards,
Paul -
Solution Manager Service Desk: BC sets
Hi,
While configuring the SolMan Service Desk Scenario (in IMG activities) "Basic BC Sets for Configuration" few doubts I have:
1. This list of BC Sets need to be done on each Client (Devp / QA & Prd)? with reference to Note: 898614
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_TPI_ACT_AST_001
2. Can I change the Production system role while activating BC Sets On that Client?
3. Due to some reasons if i missed to change the role from Producation to XYZ and activated, is there will be any impact on the system?
Please suggest me on the above points.
Thanks & Regards,
JoseHi,
refer to following notes.
These BC sets actually carry out some standard setting across your system.
Note 898614 - Solution Manager Service Desk: BC sets
Note 931196 - New text types for Service Desk in SAP Solution Manager
Pls assign pts. -
SSO from Solution Manager to Wily Enterprise Manager issue
Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
DavinderHello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil -
Excessive memory utilization in Solution Manager 4.0
Dear all,
I recently migrated a SAP Solution Manager 4.0 SPS13 (Unicode) system from a Sun E420R with 2 CPUs and 4 GB of RAM to a Sun T2000 with 32 CPUs and 32 GB of RAM. After doing st06, I realised that 31 out the the 32 GB of RAM are consumed by Solution Manager, which doesn't seem right, even if the system is a double stack system and Unicode. Stopping the Java stack, I had 22 GB free, still 12 GB for the ABAP stack looks excessive
Any ideas how I can see where the memory is consumed and how I can reduce its consuption? This piece of hardware is meant to host other systems as well, not only Solution Manager. I haven't configured yet alerts, monitoring etc, so the system is barely used
I am running on Solaris 10 and Oracle 10.2.0.2
Many thanks
AndreasHello Ragu,
40G
Regards
Andreas
Edited by: support team on Apr 15, 2008 1:14 PM -
MOPZ has issues calculating stack XML file in SOLUTION MANAGER
Hello,
We have a SOLUTION MANAGER system on NW 7.0 EHP1 SP stack level at initial support stack (ISS).
Recently we upgraded all our R/3 systems to ECC6.0 EHP4 SPS04 and now we are trying to upgrade the stack level to EHP4 SPS07. So we are trying to get a XML file from MOPZ but no luck.
The backend system has all the correct data updated in SMSY and all looks fine but while we try to calculate the stack for EHP4 SPS07 it ends with error like below mentioned.
Please look into the errors and throw some light if anyone has come across the same.
Error details:
System Messages
Type Message Text
Error The Installation/Upgrade Package for Add-on EA-APP L rel. 600 is not available
Error ABAP queue check failed
But the backend system has EA-APPL level at 604, we do not know why it is looking for installation/upgrade package for
EA-APPL 600.
Regards,
Yoganand.Vhi
can you check the sap note
1. Note 1277035 - Solution Manager: EHP4 product data missing
might be this could be the reason for your issue
or
check the thread already discussed the same and the solution also provided
[EHP4 upgrade error on SAPK-603DHINEAPS|EHP4 upgrade error on SAPK-603DHINEAPS]
////////////////It seems that there is a small bug in teh software vector for EA-PS.
Essentially, SAINT prevents you from going forward because it thinks that you don't have the correct version of EA-PS installed.
The solution for this is described in OSS Note: 1143022
"To import EA-PS in a system that already has the level EA-APPL 604, load the attached file ACP_EAPS.SAR into your system (SPAM-> Support Package -> Load Packages -> from Frontend) before you start the import using SAPehpi. Otherwise, an error may occur in the queue calculation, which can be solved by reloading the ACP"////////////////////////
check and update
Jansi -
Difference between Solution manager 3.2 and 4.0
Hi
Can anyone tell me about the solution manager functionalty differences between 3.2 version and 4.0 version
points will be rewarded
Dinaker vikas
Edited by: Dinaker Vikas Kommugury on Mar 26, 2008 12:16 PMHi Dinaker,
I have attached two helpful link below there you can assist your self .
http://www.saptechies.org/release-notes-sap-solution-manager-32/
http://www.saptechies.org/release-notes-sap-solution-manager-40/
thankssss -
Some quick question for solution manager in 2 system landscape
First of all is there any way to not implement Solution manager but to still be able to patch the system.?
i really need it only for this.
If there is no way to avoid the solution manager, tell me is the saprouter the only way for connection to SAP for the patches download. I don't need anything else for now.
IS there a way to use a direct connection to SAP,?
do the sAP router has to have 2 NICs where one is the public and one the private IP?
i need to solve this one quickly so any help would be appreciated
Thank you in advance!Hi,
you do not need Solution Manager to patch the systems but you need Solution Manager to approve download basket for downloading pacthes.
Information regarding the connection to SAP can be found at:
Note 35010 - Service connections: Composite note (overview)´
Hope this helps. -
Process for applying for Solution Manager Key?
I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager keyBalaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch -
Solution Manager on 32-Bit for ECC-6
Hi Gurus,
We need to bring our 32-Bit ECC-6 system on EhP4 as soon as possible.
From installtion documents I found that its two step installation. First install EhP3 and then EhP4 using SAINT.
To install EhP we need use Solution Manager. Currently we dont have Solution Manager installed. Our first step would be installing Solution Manager. There are two options available:
1. SAP Solution Manager 7.0 including SAP Enhancement Package 1.
2. SAP Solution Manager 7.0.
As everywhere its written we can not install solution manager on 32-bit but some some threads say we can do.
Confirm that Solution Manager 7 cannot be installed on a 32-bit windows sys
Assuming that we can still install Solution manage on 32 bit, first we need to install EhP3, which solution manager version should we use 1 or 2?
Thanks in advance
Regards
Shreeshail Ganiger
Edited by: ssganiger on Nov 5, 2009 6:48 AMHi Shreeshail,
Please use opton 1. This way you can choose to install either EHP3 or EHP4 (as your case maybe).
Also, you wouldn't need to upgrade solman to ehp1, as ehp1 comes with a lot of corrections which otherwise you will have to manually implement on a Solution Manager 7.0 system.
Cheers
Rishi
Maybe you are looking for
-
Hi Experts, Please tell me what is exact WIP in production order settlement. Why it is need to Calculate WIP using Tcode : KKAX - Individual Processing.Pls don't suggest SAP library. I don't want defination of WIP.If possible explain with example. Vi
-
Report Painter: How to add new(customer specific) field to CCSS table
Dear Experts, We have requirement to display the orders based on Profit center or Profit center groups in report painter. So in report library(6O1), we want to add fieild PRCTR or any customer specific field(ZPRCTR) to CCSS table. Could you please le
-
Imac was stolen, can i get my iphotos to my ios7
My Imac was stolen, and i want to know how to get my photos from my Iphoto Imac App?.. If yes how?..
-
I can not open a PNG file or convert my files to PNG. any help?
-
Preview next / previous page script.
Hi I'm trying to find or write a simple script to tell preview to go one page forward or back in a PDF file. Anyone help? Or anyone have something similar that I could try to adapt or guide me to a good web page to help me. Regards. AP