Note 951952 - Incorrect excise values if batch split in MIGO for import PO

Dear participants,
We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO,
for following issue,
While doing import goods receipt for batch split quantity,
excise base value is calculating for entire amount not by splitted quantity.
We are unable to solve this issue.
We are using SAP ECC release 6.0 level 11 whether above mentioned note can be applied or else any other
new notes to apply solve this issue.
Advance thanks
Regards,
A.Jeyakanthan

Thanks for reply,will check note is applicable for current package level.
Actually we found excise base value is same for GR of batch split quantities for same material
with valuation type import duty free.

Similar Messages

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

MIGO not updating with excise value.

Hey Guys,
I am facing with this problem of MIGO not
updating with excise value.
When I am creating the MIGO doc, and after
I give the excise invoice no. the excise
values are not picking up. Its showing
zero values.
The following
steps are being followed by me.
ME21N - Create STO from plant to warehouse
VL04 - Create outbound delivery
VF01 - Create invoice
J1IIN - Excise invoice
MIGO - Goods receipt at warehouse
Earlier it was working fine, but after
we upgraded the system with patches and implemented
Secondary higher education cess the
problem arose.
Please advise.
Appreciate your help.
Thanks,
Zak

Got answer from SAP..dunno what they did but it was rectified.

Reg: Base value in Excise tab in MIGO for imports po

Hi All.
I have a doubt how is the base value claculated in excise tab while doing MIGO for imports PO does this value is picked up from the materila master ?!!!1
regards,
Abilash V

hi
for import MIGO u r entering the doc no of excise (miro doc )
using this system calculates the base value in MIGO
when u do MIGO for imports at start only system will ask u for doc no of MIRO
regards
KI

Batch Split during GR for Production Order Confirmation

Hi All,
We need to do batch splitting during GR for Production Order Confirmation.We are using CO11N for confirming the Production Order and in the PP settings auto GR is activated once the Confirmation is done.
Currently it is generating only single batch number for the complete quantity, but our requirement is that we need that system should create separate batch for each piece.
For ex.: Production Order is for 100 pce, when we do Production Order confirmation, system is automatically doing the GR by 101 movement type and it is creating one single batch for full 100 pce. But we want the batch number should be generated for 1 pce i.e. we want to split the 100 pce into 100 batches with 1 pce each.
Please let me know what can be done for this requirement.
Regards,
Ankit

Dear,
In OPK0 you need to active the screen Mill: Goods Receipt (8485) for confirmation profile for the single-screen entry.
Best way is use BAdI /SAPMP/SPLIT_CO11N for the Enter Time Ticket for Production Order transaction (CO11N)
you must activate BAdI implementation /SAPMP/SPLIT_POPUP and/or /SAPMP/SPLIT_CO11N for this BAdI
I have use the same BADI it will ask you number of split according to that it will split the GR line item.
Please refer this link,
http://help.sap.com/saphelp_dimp50/helpdata/EN/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
Regards,
R.Brahmankar

Excise Tab in MIGO for import PO

Dear all
When doing MIGO for Import PO excise tab is not appearing for the material
I have maintained all the data in J1ID for the material and plant
already we use to capture EI for the same material and plant but this time this is creating issues
We have posted an inoice of planned delivery costs but no excise tab in MIGO
What might be the reason

>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Batch split after gr for inprocess inspection.

Hi experts,
i have a scenario which i am not able to map in sap.help on this is very much much required and will be appreciated.
we have inprocess inspection for batch managed materials for which results are recorded for mic's and goods receipts are done for the batches.once goods receipt is done material is having 48 hrs curing time. after 48 hours depending on attributes material is either scrapped or used for further operations.
now we do not want to scrap quantities in batch having minor defectsas some customers are ready to accept that material with minor defects.
What we want is this materials in a batch to be given new batch number and stored separately.
we also want to develop a report in which we want to display all the materials having minor defects with reason.
Kindly help.

Hi dhaval,
thanks for speedy reply
The problem here is that we cannot use 04 insp. type here as there are lot of batches being produced per hour and in inspection type 03 we are not doing result recording for all batches.
I want to know whether after gr posting is it possible to trigger sme inspection type so that we can do rr and post partial stock to new batch.
Also note that these abnormilities are not occuring frequently.
So as and when abnormility is noticed person should be able to create inspection lot manually and post stock accordingly.
Thanks,
Sameer

BED, AED not appearing @ MIGO for Import

Hi,
Import Pricing procedure is working fine at our production client. When we try the same at our testing client I'm facing this problem. AED & BED values are not appearing at excise item tab by default (at the time of MIGO), in fact it'll remain blank and we need to feed in values manually, whereas Ecess & SHEcess appears automatically fetching the values from Invoice verification.
Experts please advise, thanks in advance.
Warm Regards,
Rajoo

Hi Uttkarsh,
1. Tax code is V0
2. Yes
3. The values of BOE
4. Yes
The same procedure at production client is working well so there should be a setting in customizing which is available at Production & not at Testing?
Thanks,
Rajoo

Vendor Material No. and Vendor Batch field in MIGO for GR against Order

HI,
I received a very specific requirment for one of our client: Client need the field Vendor Material No. and Vendor Batch in the detail data --> material and batch tab in MIGO transcation for A01 (Goods receipt ) against R08 (Order), this is for good receipt against Process Order, Here though the vendor does not come in picture , these field are required. These field are appearing in GR(A01 against Purchase order(R01)
Regards
Rahul

Hi,
First of all, why do you want Vendor Batch no & material no while doing receipt against process order. You can enter the same while doing a GR against Purchase order & same can be tracked using some reports.
As you said, since you are doing a receipt against the Process order, vendor doesn't come in picture. Hence the vendor batch no: or vendor material no: wont be populated as per Std.SAP. You can check for some enhancements/BAdi's in MIGO transaction to populate the same.
Thanks & Regards,

Validation of batch nos. in migo for finished goods (fert)

I want to validate batch number entered by user at the time of migo for finished goods (fert) against the batchs in mcha. how can i do this? also is it possible to give f4 help to user for available bach nos. for the particular material ?

Hi,
Cannot you use message M7 668 for this purpose?
Problem is "batch has been already posted in stock"
Regards,
Csaba

Automatic Batch determination in MIGO for IM movements/GI/TF Postings

I have configured batch determination to use SLED for batches in Ascending Order.
GRs have been done for 2 batches, one with SLED a day earlier than the other.
Now,
I know there is some auto batch determination for SD documents, but I want batch suggestions for IM Movements.
I am trying to post 301 transfer to another plant, and it asks ME to enter the batch.
How can I make the system propose the desired batch (earlier SLED) automatically?
Thanks.

there is no automatic batch determination in MIGO, you have to click the stock determination button

Wrong excise Base in Excise tab in Item details in MIGO for ImportPurchases

Hi All,
We are facing an issue with wrong excise base in transaction MIGO item datails in excise tab,
Info:Excise base for CVD is Assassable value +Basic customs Duty.
Case:
In PO ,
             Value in USD     Ex Rate          Value In INR
Assesable value     101                            52.4659          5299.0559
IN Basic customs     10.1          52.4659          529.90559
Sub (*** Value + BCD     111.1          52.4659          5828.96149
IN CVD          11.11                            52.4659          582.896149
In this case the excise Base in system has to be Assassable value +BCD= 5828.96
But in MIGO in excise tab excise Base is 5,776.50--> which is wrong.
Please help in correcting the same in system.
All relevant configuration and default conditions are maintained in systm.
Regards,
Vijaykumar P

> Info:Excise base for CVD is Assassable value +Basic customs Duty.
> In this case the excise Base in system has to be Assassable value +BCD= 5828.96
Hi, I think your system is showing correct,
Base at the time MIGO will not be Assassable value +BCD, It will only be Assassable value,
Your 1st point is right "Excise base for CVD is Assassable value +Basic customs Duty"
Assassable value consist of Material cost, Insurance, Freight, 1% Landing charge etc. Check with your Imports team & Excise team for the same.
Apart from that, if your concern is about values then just check the exchange rates & the Miro posting what you have did.

Excise difference in Commercial invoice and GRN for import PO

Dear All
This is regarding Import PO
During Making Commercial Invoice I am booking the commercial invoice
CVD ,Edu cess and Sec Edu cess
Let us say
14 Rs
2 Rs
1 Rs
Now during GRN when the bill of entry cones the actual CVD is 16 Rs
Ecess 2.5 Rs and SEcess is 1.5 Rs
and the Part II entries are posted
How should i post the difference of 2 +.5 + .5 Rs = 3 Rs
I have tried J1IH
Can any body suggest how this situation to be handled for import PO
Thankz and regds
shailesh

hi
you can pass a manual JV.(Direct FI entries)

Excise Values in MIGO For MPN Materials

Hello,
While capturing the excise invoice for the MPN materials system is not picking the excise values. We are using the TAXINN procedure and i have maintianed the condition records for the Key combination country/Plant/Control Code/Taxcode (WE have created a condtion table for this key combination) and we also maintained the MPN materials in the J1ID also but it is not picking the values in the item tab. Taxes are caluclated in the Purchase order.
Note:
For the MPN Materials we have only three views maintained in the material master and it is not extended to any of the plant.
I have noticed that if use the other tax code which i maintained the condition records for Conidtion table 651 (key Combination of Country/Tax Code) the excise values are flowing in MIGO but if i use the tax code EA (Condition table 652 Key Combination: country/Plant/Control Code/Taxcode) we are not getting the excise values in MIGO
Please let me know if there is any configuration is missing.
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Oct 1, 2009 2:10 PM
Edited by: Kumar Rayudu on Oct 1, 2009 5:19 PM

>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil

Note 951952 - Incorrect excise values if batch split in MIGO for import PO

Similar Messages

Maybe you are looking for