Note to all. I hate to type

If my posts ever seem short or otherwise unfriendly please don't take it personally, I just HATE to type. Much props and thanks to all who have helped me, and best of luck to all I attempt to help! Bruce, Data Stream Studio

You guys are hilarious!
Look, I don't think I've said this enough: I really appreciate what all of you guys do for this forum.
True confession time, and it may be a sad testament to the state of my personal life, BUT, I actually log in to this forum at least twice everyday just to read. Why? Because it far more informative that any manual or book, and it's a bl**dy good larf.
Thanks again.
P.S. Check out $ta$h's observations on his "future ex wife." Truly priceless...

Similar Messages

I am trying to upload a file to an accounting website for work. It will not allow me to select any type of file, they are all greyed out.

I am trying to upload a file to an accounting website for work. My computer will not allow me to select any type of file, they are all greyed out.

Try using a different browser. If it works, then the problem is most likely Safari. If the other browser doesn't work, perhaps it is the web site.
Firefox

All My Files not displaying all file types

So, as above, in Finder using the default display by file type, the only results I see are for Spreadsheets, Developer and Documents.
No seperate lists for PDFs, Images or any other file type.
Looked in preferences but can't seem to see any place where this might be enabled.
Glum...

Here's another data point: I found some PDFs under my Documents folder that weren't showing up in AMF. I found that simply opening one up in Acrobat Reader would cause it to show up in AMF (I didn't have to change and re-save the PDF).
I did notice that if I selected multiple PDFs at once and opened them all at the same time, some of them would then appear in AMF, while others wouldn't. But opening up a single PDF by itself would always add it to the files shown in AMF (as long as the PDF was somewhere under my User folder - if I first copied the PDF to a second hard drive that's not under my User folder and *then* opened it, it still wouldn't show up in AMF.)
In short, here's what I've discovered so far:
1) AMF doesn't seem to index anything that's not somewhere under my User folder.
2) Not everything under my User folder shows up in AMF, but if I open a "missing" file that's under my User folder, it will then show up in AMF. (Except for pictures and songs - see #3)
3) AMF doesn't index anything that's in my iPhoto or iTunes libraries (even after opening a picture in iPhoto or playing a song in iTunes.)
4) AMF doesn't index attachments to Mail messages unless you download the attachment (presumably because it's then stored under your User folder.)
5) AMF will only seem to (sometimes) index Excel spreadsheets if they're saved as .xlsx files. Even opening, changing and saving a .xls file won't get it to show up in AMF afterward. Spreadsheets are strange, in fact. Even with some .xlsx files, they'll show up in AMF *while I have them open in Excel*, but as soon as I close them in Excel, they disappear from AMF again. This is the only types of file I've seen disappear from AMF after they've shown up once - all the other file types seem to stay in AMF once you can get them to show up there.

Generating Alert in SCOM of all the services whose type is automatic and that service is not running

Hi
I want to generate alert in SCOM for all the services whose type is automatic and they are not running due to any reason. I know that i can generate alert for a particular service that it is running or not. But i want to generate alert for all the services
whose type is automatic and it is not running.
Thanks

This has been asked before. Here are some links to help you:
Link 1
Link 2
Link 3
Link 4
Link 5
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Help: Not getting all data from text data type

Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
Thanks

I set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B"

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

I can not see all "Divisions" in BP Rel.--Partner Function Assignment

Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Long

hi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish

Not getting all my bytes from inout stream.

hi,
i'm writing an i-appli that interacts with a java web server. my problem is that i'm not getting all of my bytes through to the phone.
actually i'm using an emulator right now. when i use the real phone i set content length on the server side and it all goes through. but for some reason when i set content length on the server the emulator doesn't pick up anything(using i-jade emulators) bug??.
it should work though because when i print out the number from in.available() it matches with the number of bytes that i want to go through.
but when i grab the int from the read it is less than what returns from available().
here's a snippet of the i-appli code. i'm printing out TESTBYTELEN to the screen and it is less than when i set it to 'bc' from in.available. (i'm getting 3784 of 4420 bytes EVERY time)
thanks for any help
matt
========================================
HttpConnection conn = (HttpConnection)Connector.open(IPString,Connector.READ,true);
conn.setRequestMethod(HttpConnection.GET);
conn.setRequestProperty("Content-Type","text/plain");
conn.connect();
InputStream in = conn.openInputStream();
if (in == null)
throw new IOException("servlet unreachable");
bc = in.available();
streamb = new byte[bc];
TESTBYTELEN = in.read(streamb,0,bc);
in.close();
conn.close();
=========================================

Also, testing with available is not that good... it just tells you how many bytes can be read without blocking, not the amount of bytes that can actually be read. So the code should be more like:
bc = MAX_BYTES_TO_BE_READ;
streamb = new byte[bc];
int bytesread;
int off = 0;
int len = bc;
while ((bytesread = in.read(streamb,off,len) != -1) {
off += bytesread;
len -= bytesread;
(to clarify, in.read returns the number of bytes that were actually read and -1 when there are no more bytes to be read)

Mail not getting all messages from server and other strange behavior

Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
Boz

Hello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Crystal Report not Adopting all possible Dropdown Values from BEx Variable

Hi all,
I am having an issue in a Crystal report where the drop down parameter that is sourced from a BEx query variable does not include all the possible values in the cube (or in master data). After learning my lesson the first time of not changing the name of the variable or changing it to dynamic (this causes it to break), I had the understanding that the value list may not be complete when running the report in the Crystal client or in the viewer, however, I thought it should be correct when published to the BOE and run in infoview. I am getting the same incomplete list in infoview. I published the report into infoview using the Crystal 2008 desktop client, not the /CRYSTAL/RPTADMIN transaction.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
Here's some info:
Crystal version: CR2008, version 12.2.4.507
BOE version 3.1
SAP BW 7.01 EhP 6
Thanks,
Chad

Hi,
- in the Crystal Reports designer the list of values is not online and there is a maximum number of values - configured by a registry setting:
(windows 7)
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\SAP\BWQueryReportWrapper
Key: MaxPickListSize
and correct you can not change the name of the variable or set it to dynamic as the definition is based on the BEx query.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
The checkbox on the Multi Structure is not for the option to combine 2 Bex queries - it is for Bex queries with 2 structures and the BW query driver has been deprecated already and you have to use the MDX Driver.
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
in Crystal Reports Designer the list is static and when you publish the report using the BW Publishing to your SAP BusinessObjects Enterprise system the list becomes dynamic in InfoView.
regards
Ingo Hilgefort

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore and they were not at all encouraging, saying they doubt that the

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore but they were not at all encouraging, saying they doubt that Apple warranty will cover something like this, and also that the whole keyboard would have to be replaced as they don't do individual key repairs.
This is very unreasonable to me. Firstly, the keyboard does work (is not actually broken) although the intermittent clicking sound of a single key is very irritating to me and I expect more from an Apple product than a flawed keyboard.
Any thoughts, tips and insight on this greatly appreciated.

Just wanted to conclude by saying that I did go to an Apple store and after supplying proof of purchase and verifying the warranty etc, I had my MacBook checked out by one of the technicians who (after finding that my machine was immaculate bar the sticky keyboard of course) they replaced the entire keyboard within a week.
I was so happy with the helpful and prompt service and am now so happy with my new silent keyboard!
Also wanted to add that the young guy who told me at the iStore that he doubted Apple would support this and guessed Apple likely say it was due to user damage was being a tool, and he was obviously assuming that I had done something wrong to break my keyboard.
This was my first Mac purchase and I was delighted to find that the support is genuine and not just a rumor... I have since gone on to purchase an iPad2 will probably buy the iMac too once my trusty PC needs replacing. I was never a PC hater and got on well with windows, and was actually reluctant to make the change - but so far so good :)
Thanks for all the help!

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

Note to all. I hate to type

Similar Messages

Maybe you are looking for