Notebook Cam always needs to be restarted
When I boot my Dell Inspiron 9300 the Webcam for Notebook (latest driver and software), the cam is never recognized, neither by Creative or thirdparty software, I always have to plug the USB connection out and in again, then everything works fine. How can I manage to leave the USB port connected and have my cam ready without unplugging it always?
Thomas
Changed it and it's still doing it.
Don't know if this will help but-
When I perform airport network diagnostics on my mac when this happens, this is what I get:
airport-green
airport settings-green
network settings-yellow
isp-failed/red
internet-failed/red
server-failed/red
This will happen just all of a sudden for no reason (and the router shows as a perfect signal)
Just as before, once the router is unplugged then plugged back in it works normal for awhile again.
Oh and firmware is v1.0.04
Similar Messages
-
I never had this problem between the 1st generation tv and the 2nd generation tv.
Please,
Advise
Bill burrowsWelcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
when I connect it to "iluv" speaker dock , the sound crashes and says "unrecognised" however, before I updated the software it was working efficiently .. It also crashes when I connect my headphone and disconnect ..
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a hardware problem.
Apple Retail Store - Genius Bar -
Iphone 5-updated to ios 7.0.2 keeps freezing in lock screen.I always need to restart or should wait till a phone call come to unlock the screen. Does any body have the same issue??
I do have the same issue with my 4s after updating.tried with restoring several times,but the problem still persists.....
-
My iphone 4s is no longer detecting wifi since the IOS8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!! I cannot afford to go over my data and I use wifi at home and work... I believe the updates have caused the issue, because it was working fine before the second update released (I hadn't put the first one one until I noticed it had stopped working, and by then the second IOS8 version had came out). They need to do a third update to fix this issue.
If it's grayed out:
Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service. -
Unable to boot normally - Always need to boot with Single User Mode
Hi Community,
Since last few days, I am unable to boot my Macbook Pro normally, running latest version of OS X Yosemite. When I boot, it goes to grey screen with Apple logo and progress bar, once the progress completes to 100% (after 5-10 minutes which is very longer than usual), it asks me to 'Select language' which seems like fresh installation of OS X. In that case, when I click next and it doesn't detect my SSD (blank list of select installation disk/drive).
After reading some threads, I found work-around and always need to boot into Single user mode (by pressing Command+S during power on) and then need to run following commands...
/sbin/fsck -fy
/sbin/mount -uw /
"device is write protected" numerous times
reboot
and then only it loads OS X and displays login screen. This happens all the times and I need to follow above steps always to get login screen.
How can I fix this?Please help me out here. I tried booting it off a USB flash drive with ATV flash but that gave me some errors and prompted me to login with username [email protected] with password frontrow
But I am not sure how to get to login using a suitable input. I tried to telnet it using my PC over network but I dont think it has initialized anything (like wifi or network) at the prompt. Would it take USB keyboard input? All I can do is remove the power and restart it with the usb flash out and get into then get into the recovery loop. I am not sure replacing the hard-drive would help. Any help would be greatly appreciated.
Thanks
Sinu -
Hi
I have previously discussed this problem in another thread. I have .mts files that I insert in a project (project preset set to PAL-AVCHD Full-HD)....when inserting i always need to render the clips and as many peole have mentioned, this should not be needed, instead PrEl should take care of this by itself..and it really sunds weird if it doesnt...
So, why is this happen...i get so frustrated when I have to re-render the clips all the time, since also - it takes a looong time for jsut tiny tiny clips ? I posted the hardware specs I have two days ago in this same forum, and it looks from the answers I got that this hardware should be enough for not having to wait several minutes to jsut add a 6 second AVCHD clip ?
Please look at below image that is a screenshot from MediaInfo about the details for my .mts file I'm trying to add - resulting in new rendering needed, plus the fact that it takes about 5 minutes to render it ??
Please, suggestion or solutions ? I'm lost...I got feedback yesterday that this is a known problem with both PrEl 8 and PrEl 9 ..that AVCHD clips needs to get rendered manually when they are added....i.e a known bug in these versions ?? Any experience ? How can I move forward, I have problems to understand that such bug should exist without anysolution and/or workaround since I see this as a feature that MUST work for people not getting crazy :-)
MediaInfo screenshot (click on image to get it to look better) BR /HelmutHi Neale
many thanks for your time trying to help me out.....
Please see my answers below in bold, hope you and/or someone else can help me with some further answers
Are you opening a project created in PRE8 with PRE9? If yes, that is the most likely cause of the problem. Create a new PRE9 project and see if the same problems after you import the clip and save the project. No, I'm only working in Pr 8.0 - I have this problem as soon as I add a clip..not that into the different formats, just know that the best possible output from my camera (Canon HF10) should be AVCHD..thats why I added teh detailed info from "MediaInfo". can you tell from that info I'm correct, i.e that the .mts file is really AVCHD as expected ? Just to help me confirm that. So, I havent been using PrEl 9.0...another person two days ago told me that PrEl 9 also got similar problems as I reported for my PrEl 8.0 ?
When you first added the clip to your project did you receive any messages that the file was not suitable for the format? If so did you accept the offered preset? If you didn't start a new PRE9 project and this time accept the offer. No, I did not get any messages as all about the format. Occasionally I get something like "Do you want to fix the quality in the clip" ..cant recall exactelly what the message is, but its for sure nothing about the format
When you put it into the project, did you have a red line running the length of the timeline? If you do then your preset is not correct (this is purely PRE9. PRE8 always required rendering AVCHD footage).Yes, always when I add a clip I get this red line. If I understand everything correctly this means I have to hit ENTER key to create a preview file....thats my second problem - as soon as I do that, it renders the clip very very slowly although I should have prety good hardware (According to spec posted two days ago).
So, as a summary. Do you think that buying Premiere Elements 9.0 should get rid of this problem when adding AVCHD ? If that is the case, I feel I just want to be sure about this and that I will not experience the problem again. Can it not just be some setting that is, by default, not correct in Premiere El 8.0 that is causing this or is this really a known bug without fixes available from Adobe?
Best Regards
Helmut -
Always need to render audio on clip import
Hi,
I use Streamclip or to convert my AVI files (from a digital camera) to DV so I don't have to render immediately on import. All works ok with the video, but I always need to render audio on import. Does anyone have any suggestions as to what settings to use on Streamclip and / or FCE?
Thanks,
gDo not convert to DV. Convert to QuickTime using the DV codec. The export to DV setting in Streamclip is for DV Stream and is used only by iMovie.
-
Does an external hard drive ALWAYS need to be connected to my mbp (OS 10.10.1) with retina display for Time Machine? Or can it be connected once a week or whenever I want? I used to have an external drive always connected to my previous mbp, but it made moving my mbp around a bit of a hassle with it connected...
When the backup drive is not connected, some of the free space on the internal drive will be used to make local snapshots, which are backup copies of recently deleted files. Local snapshots will protect you from unintended file deletions, but not from a drive failure. You should only go as long between backups as you're willing to lose data. If losing a week's worth of work is acceptable to you, then that backup frequency is OK. Otherwise, it isn't.
-
Need code for restarting my system
hello every body i need code for restarting system
this code does not work
try {
Runtime.getRuntime().exec("shutdown -s -t01") // stop
}catch(...
or
try {
Runtime.getRuntime().exec("shutdown -r -t01") // reboot
}catch(...
or
try {
Runtime.getRuntime().exec("shutdown -l -t01") // logout
}catch(...write a jni function that calls this method : ExitWindowsEx()
check the documentation -
My albums and slideshows disappeared from the left column when I ejected a Canon camera after a download. My version of iPhoto '08 (V7.1.5(378)) had just crashed when I first connected the Canon camera to download. I restarted iPhoto.....successfully downloaded 22 photos, and ejected Canon camera, upon which albums & slideshows highlighted blue and disappeared from the left column. The photos still seem to be under the EVENTS and PHOTOS in the LIBRARY. Any thoughts?
Restore from your back up.
-
Mac needs to force restart too often
My mac keeps giving me an image on the screen (http://cjmiscfiles.webs.com/20110124211705.jpg) which says I need to force restart my Mac. I got this message 2 times in a week, and I got it once before. I just got my Mid-2010 Mac when it was first out, and I'm concerned that it might be breaking already. Please help!
Yeah I've been getting these force reboots as well, way too often, like 3 in the past 2 days actually, often within minutes of each other even after the reboot.
here are my Panic logs
Sat Jan 21 11:36:42 2012
panic(cpu 1 caller 0x2abf6a): Kernel trap at 0x00279007, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x131cb000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x02330000, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x8224bcb8, ESI: 0x17fcb940, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x00279007, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x8224bad8 : 0x21b837 (0x5dd7fc 0x8224bb0c 0x223ce1 0x0)
0x8224bb28 : 0x2abf6a (0x59e3d0 0x279007 0xe 0x59e59a)
0x8224bc08 : 0x2a1a78 (0x8224bc20 0xd11773a 0x8224bcb8 0x279007)
0x8224bc18 : 0x279007 (0xe 0x48 0x7bf90010 0x10)
0x8224bcb8 : 0x279067 (0x17fcb940 0x0 0x8224bcf8 0x26dd64)
0x8224bcc8 : 0x26dd64 (0x0 0x246 0x8224bd58 0x2345f4)
0x8224bcf8 : 0x26e022 (0x7bf91c18 0x7bf5d000 0x8224bd38 0x29ffbb)
0x8224bd18 : 0x26ec52 (0x17fcb948 0x1 0x0 0xd0172b8)
0x8224bd58 : 0x261954 (0x17fcb940 0xee4a318 0x1 0x583000)
0x8224be88 : 0x261b4b (0x583000 0x1 0x0 0x0)
0x8224bec8 : 0x283c4f (0xd980854 0x500000 0x1 0x583000)
0x8224bf28 : 0x4d4007 (0xd980854 0x500000 0x1 0x83000)
0x8224bf78 : 0x4f82fb (0xd99d000 0xefaa2a8 0xee13234 0x0)
0x8224bfc8 : 0x2a251d (0xefaa2a4 0x1 0x10 0xd94f5e4)
BSD process name corresponding to current thread: hidd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 377866192353
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x146a000, size 0x20480) - last unloaded 159381136314
loaded kexts:
com.parallels.kext.prl_vnic 6.0 11828.615184 - last loaded 43639154960
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prl_usb_connect 6.0 11828.615184
com.parallels.kext.prl_hid_hook 6.0 11828.615184
com.parallels.kext.prl_hypervisor 6.0 11828.615184
com.Cycling74.driver.Soundflower 1.5.2
at.obdev.nke.LittleSnitch 2.3.09
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.31
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.GeForce 6.3.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleHPET 1.5
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 6.3.6
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.NVDAResman 6.3.6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Sat Jan 21 11:29:53 2012
panic(cpu 0 caller 0x2951bf): "pmap_pv_remove(0xc85015c,0x1003e8000,0x100, 0x100000): pv not on hash, head: 0x84b7a0, 0x100000"@/SourceCache/xnu/xnu-1504.15.3/osfmk/i386/pmap_internal.h:742
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x7a38b2c8 : 0x21b837 (0x5dd7fc 0x7a38b2fc 0x223ce1 0x0)
0x7a38b318 : 0x2951bf (0x59b28c 0xc85015c 0x3e8000 0x1)
0x7a38b448 : 0x29555c (0xc85015c 0x300000 0x1 0x1481800)
0x7a38b4b8 : 0x2615b0 (0xc85015c 0x300000 0x1 0x400000)
0x7a38b5e8 : 0x261b4b (0xffe00000 0x7fff 0x0 0x0)
0x7a38b628 : 0x22c8d2 (0xc7fcc2c 0x0 0x1 0xffe00000)
0x7a38b658 : 0x4c9eb7 (0xdee99c4 0x0 0x0 0x475ce8)
0x7a38b718 : 0x47e29b (0xdf0e804 0x7b703000 0xbf53b7c 0x0)
0x7a38b9f8 : 0x47c923 (0xdf0e804 0xc89b848 0x7b703000 0x1000)
0x7a38bbd8 : 0x47d5a0 (0xbf53b7c 0x0 0x0 0x0)
0x7a38bf78 : 0x4f82fb (0xc66f000 0xd7d52e8 0xcd37cd4 0x1)
0x7a38bfc8 : 0x2a251d (0xd7d52e4 0x0 0x10 0xc040b84)
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 17816762202550
2 pagetable corruption incident(s) detected, timeout: 1
Incident 0x0, reason: 0x4, action: 0x0, time: 0x1a89f13999b
Incident 0x0, reason: 0x4, action: 0x1, time: 0x103449c520ed
unloaded kexts:
com.apple.filesystems.msdosfs 1.6.3 (addr 0x81ec8000, size 0x53248) - last unloaded 5647158498072
loaded kexts:
com.parallels.kext.prl_vnic 6.0 11828.615184 - last loaded 5421833198597
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prl_usb_connect 6.0 11828.615184
com.parallels.kext.prl_hid_hook 6.0 11828.615184
com.Cycling74.driver.Soundflower 1.5.2
com.parallels.kext.prl_hypervisor 6.0 11828.615184
at.obdev.nke.LittleSnitch 2.3.09
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.GeForce 6.3.6
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleBacklight 170.0.46
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.nvidia.nv50hal 6.3.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.NVDAResman 6.3.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Fri Jan 20 15:40:46 2012
panic(cpu 0 caller 0x293f8c): "pmap_pv_remove(0xc81d1d0,0x10071e000,0x80, 0x80000): pv not on hash, head: 0x84b7a0, 0xbb4e000"@/SourceCache/xnu/xnu-1504.15.3/osfmk/i386/pmap_internal.h:742
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x8125bb98 : 0x21b837 (0x5dd7fc 0x8125bbcc 0x223ce1 0x0)
0x8125bbe8 : 0x293f8c (0x59b28c 0xc81d1d0 0x71e000 0x1)
0x8125bd78 : 0x255994 (0xc81d1d0 0x71e000 0x1 0x39060)
0x8125bde8 : 0x2589af (0x3c17bb4 0xc81d1d0 0x71e000 0x1)
0x8125bf38 : 0x2ab83c (0xdf2f5c4 0x71e000 0x1 0x3)
0x8125bfc8 : 0x2a18da (0xdf09a64 0x0 0x10 0x0)
BSD process name corresponding to current thread: hidden
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 5665452406288
2 pagetable corruption incident(s) detected, timeout: 1
Incident 0x0, reason: 0x4, action: 0x0, time: 0x5271693e5d1
Incident 0x0, reason: 0x4, action: 0x1, time: 0x5271744eef2
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x8019b000, size 0x20480) - last unloaded 135794234610
loaded kexts:
com.parallels.kext.prl_vnic 6.0 11828.615184 - last loaded 42726855655
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prl_usb_connect 6.0 11828.615184
com.parallels.kext.prl_hid_hook 6.0 11828.615184
com.Cycling74.driver.Soundflower 1.5.2
com.parallels.kext.prl_hypervisor 6.0 11828.615184
at.obdev.nke.LittleSnitch 2.3.09
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleHDA 2.0.5f14
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.GeForce 6.3.6
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 6.3.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.NVDAResman 6.3.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0 -
E3000 needs to be restarted regularly, sometimes resets to factory default
My E3000 needs to be restarted at least once a week. Pings to the router will slowly lag over time and reach 700+ after several days from my wired desktop. Sometimes during the restart the router will also reset to factory default settings.
So far I've installed the 1.0.02 (build 4) firmware and done the restart while holding the button. The new firmware has greatly improved my wireless performance but I have no idea what to do next.Follow the below mentioned settings and then check.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter. Leave Username blank & in Password use admin in lower case. Click on the Wireless tab > Click on Advanced Wireless Settings Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings. -
Mail needs to be restarted every time I awake my computer from sleeping,
Every time I awake my computer from sleeping, Mail needs to be restarted.
Why's that?
The problem is that if I'm not aware of i it, my Mail stays offline.
Any help?
Thanks
NicoThis is a bug that doesn't affect everyone. I can't reproduce it and I don't know what triggers it. The following steps have been reported (but not confirmed by me) to work around it in some cases:
Turning off Dictation
Turning off the built-in firewall
Turning off the Energy Saver setting to allow hard drives to spin down when idle
Changing DNS servers
That's all I've been able to find out. -
Why xmii server needs to be restarted if parameter of rfc is changed?
hi,
I am developing a RFC function module in SAP R/3 which will be called from XMII.Whenever I add any export parameter in the RFC the XMII server needs to be restarted...
I am unable to understand what is restarting of server and why it needs to be restarted ....Please help...
Also i am interested to learn XMII ....How can I start ?Hi Sweta,
after you have changed the RFC settings, you have to reset the JCO cache because some values are buffered. You can use the following link:
MII 11.5:
[http://<xmiiserverip>:<port>/Lighthammer/JCOProxy?Mode=Reset]
MII 12:
[http://<xmiiserverip>:<port>/XMII/JCOProxy?Mode=Reset]
Please refer to the following thread for infos for new users:
[regarding xmii...;
Also have a look at the WIKI where you can find lots of information:
[https://wiki.sdn.sap.com/wiki/display/xMII]
Regards
Michael
Maybe you are looking for
-
Firefox says MS Hotmail sec cert is not valid and will not open page
I see similar problems but no answers. This issue pertains to Firefox (Light) v 28. I did not have the issue with v 27 and affects Hotmail but not gmail (?). This is what I get when I try to log in: Secure Connection Failed An error occurred during a
-
Same URL when called from other page when called directly behaves different
Hi All, I am working on SRM 5.0 implementation , the open catalog interface applications are called from a link from the standard ITS (thses catalog applications are developed in BSP) and then submited back to the ITS application using a URL : va r
-
Finding Template Name Based on the Query
Is there a way to find the Technical Name of a Template in which a query is being used? I tried the Where-Used command on the query but it doesn't show which templates are using it.
-
SMTP relay part 2 - Thanks chad
First off - thanks for help on the first part of my problem goes to Chad. The second part of my problem is that as well as accepting email from the friendly IP's I also want to set-up iMS to accept mail for another domain. This is because we act as a
-
Minor error in kernel package text
In the following kernel install message, 'earlier' should be replaced with 'later', unless I'm totally misunderstanding what's intended here: >>> WARNING: mkinitrd will be dropped in kernel 2.6.18 series or earlier!