Notebook connecting to TV

I bought a display port (male) to HDMI (male) cable to connect my Elitebook 2560p to Samsung TV.
Tv screen says "No Signal" please check cable connections, but everything is connected well.
Still does not work after choosing 2nd screen and/or Fn f4. Everything else is running well on Win 8.1
(originally on Win 7)
Please advise

Hello blauw,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

Similar Messages

WRT54G (v7) reboots when notebook connects

Hey folks!
I really have a weired issue here...
My WRT54G (Version 7) was running just perfect for a couple of years already... I've bough a new Netbook recently and when this netbook connects to the router it takes about 10 seconds and the WRT54G reboots itself again and again.
You know, I really see a lot of PC problems, but this one just odd
Just like I said it was running perfect for years.
I have two notebooks here:
- My old one (ASUS X-52SA, running Win7 Ultimate)
- and the new netbook: A Lenovo S10-3t, running Win7 Home premium.
When I'm working with the ASUS, everthing's fine. I've sent a "ping 192.268.1.1 -t" from it to the router and the WRT is responding well.
As soon as I connect the Lenovo to the WRT (not matter if I'm doing this via WiFi or LAN-cable!!!) the ping will show about 3 timeouts on the ASUS. The ping is OK then for another 7 seconds before it goes dead again. This goes on and on...
On the Router itself I can see that it's really rebooting then.
- When the ping times out, the router really is rebooting (all LEDs are off, shorty after it all of 'em will flash for a short time).
- And it's rebooting and rebooting and rebooting...
I really haven't seen this before in my whole career...
I though I would just update the Firmware and everything's will be fine - until I found out that the v7 cannot be upgraded somehow...
Does anyone of you guys have an idea what the reboot could cause?
(I'm sorry for my grammar - English is not my native language )
Best regards,
Michel

Check if you have static ip assigned on Lenovo computer.
If yes, then set it on “Obtain an IP automatically” to do so follow this link .
If it is already on “Obtain an IP automatically” then try to upgrade/re-flash the firmware of the router.
To do that first download the firmware from here and then follow the below mentioned steps
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now login to the setup page of the router and check the firmware version of the router it should be updated.

SoundBlaster X-Fi Xtreme Audio Notebook connections to speake

Was wondering if anyone out there could tell me something? i have the creative S750 Gigaworks 7. surround sound speakers. i have just purchased the X-Fi Xtreme audio notebook card with the surround sound connection piece. on my sub there are four ports: Green, orange, white and black. Now on the other end of that very same cable there are only three, the typical Black, Green and Orange that i have used on my desktop for my 7. surround sound needs. My question is, where do i get this cable with both ends having all four colors to connect into my external speakers dock? if anyone can help me on this I would be greatly appreciati've. Thanks.........

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

Using windows 7 on my G61-632NR Notebook connected to Sanyo TV

The HDMI is showing as not plugged in. Video works fine but no sound from TV. I've tried uninstalling and installing and about everything else suggested in the forums.

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

HP G61-410SA Notebook connection error 651

Suddenly I could not connect to the internet. Network Saring Center shows it connected but I can't get anything up. On checking connections I am getting error 651. Even plugging broadband cable in does not fix it.
I seem to have lost one of my drivers.
I used another computer to download all network related drivers from HP and transfered them over via a USB memory stick. I loaded the drivers but to no avail.
Help - - - what am I missing.
Jim

@Jim4cad ,
Thank you for posting on the HP support forums. First thing you will want to try is when removing and installing drivers, is to do this from Windows Safe Mode.
This way you have no issues with other background processes messing up the removal of your driver.
HP PCs - Windows 8 Safe Mode
You will want to boot into safemode without networking.
Once there, uninstall the wireless drivers.
Now boot back into windows normally and install the wireless driver.
If you are having the same issue then you will want to back up all your data and do a system recovery back to the original configuration.
HP PCs - Performing an HP system recovery (Windows 8)
Let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Some Notebook can't connect AP

Hi all
I have install the AP 1131AG and set security WPA-PSK, I found problem that some notebook connect to AP for 3-4 minutes,and then disconnect,reconnect,disconnect.
Please recommend me.
Thank you.

I was also having the same issue and it almost always boiled down to outdated drivers, however being that my environment consists of mostly Press connecting to our wireless we are not allowed to touch their laptops. And the knee-jerk response by every reporter was, "It works everywhere else I go just not here." Well come to find out that in most arenas there is no wireless authentication and there was no encryption which made it easier for clients with outdated drivers to connect, so as a workaround I created a hidden ssid with no encryption and no authentication, and when these problems arose I would just have the client create a profile so they could connect to the hidden profile.
Not sure if this is best practice but it has worked for me.

Connected usb driver is not detected in window 8.1

hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......

@jeet2113
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Need help on how to secure my wireless connection.....

im new to the wireless thing and im trying to figure all this stuff out. i bought the wireless g 2.4 broadband router because i have a wireless notebook and everthing has been going fine until recently. i have excellent connection but my speed keeps going up and down but it use to stay on 54 Mbps or 48 Mbps (my notebook connection) can tell me whats wrong on that part? Another issue is how do i manually go about securing my connection because i feel like anybody can use my connection and that my desktop computer that houses the connection is vulnerable. All these problems started ever since a suspicious vehicle was stopping around my house. please help

Hi…First of all hardwire your computer with your router and then Login in router setup page through your internet explorer by typing in 192.168.1.1 in Internet Explorer > address bar > skip username and enter ‘admin’ as password > click ok. You will get router setup page in front of you, click Wireless Tab > click 2nd Sub Tab under Wireless as ‘Wireless Security’, enable wireless security, select WEP and security mode, wireless encryption level as 64 Bit 10 hex digits, and type in 10 digit number without any spaces, symbols and alphabets in WEP Key 1 box. And that’s your wireless network key or password. Do not change any other settings on that page and click save settings and then exit the page. As a result your wireless network is secured. Use that 10 digit number when your wireless computer will demand it while connecting to your wireless network.

How do I connect my imac 10.5.8 to a tv?

I have the the cable that has the mini display portion connected to my imac. And the hdmi portion connected to the tv. I then went to display settings but there was no option to mirror displays. The prompt said that "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer."

Hello there, dlg79.
The following Knowledge Base article provides some great steps for troubleshooting issues with the use of external displays:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to connect an infocus projector LP530 to MacBook Pro

We are trying to run slide show using an older IN focus projector (LP 530). . Our lab top is a 3 year mac book pro . It's not recognizing.

Hello Alliseeisgold2014,
Thanks for using Apple Support Communities.
Please see the troubleshooting steps below to help resolve this issue of your projector not connecting to your MacBook Pro:
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

Can't connect Macbook Pro to TV with HDMI

I have a Macbook Pro (osx Lion) and I can not connect it to my tv. I am using a mini display port to HDMI adapter to connect to my Insignia TV. Whenever I connect it the screen on my laptop goes blue for a second but nothing shows up on the TV. When I check for displays nothing happens and the TV says no signal. I have tried using other cords and have had the same result. When I try to use the same cord and adapter on a different TV it works just fine. The TV model is an Insignia LCD TV NS-L22Q-10A. Please help, I have tried various methods and still can not get it to work.

Hello Alley-cat,
Thank you for using Apple Support Communities!
I found an article to assist with troubleshooting external displays connected to your mac that should prove helpful.
Named Apple computers: Troubleshooting issues with video on internal or external displays you can find it here http://support.apple.com/kb/ht1573.
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
All the very best,
Sterling

My macbook pro no longer connects to my tv through HDMI my computer screen flashes blue but my tv does nothing! could someone please help!!

HI i was just wondering if anyone could help me!!
i have a macbook pro and i have connected it many times to my toshiba tv through my HDMI cable, and for some reason now when i plug it into my laptop the screen flashes blue on my laptop but nothing happens to the tv it just says no signal and i dont know what to do!!
if anyone could help that would be fab!!
pretty pretty please!!

Hello ,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot having no display on the external display.
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
Take care,
Alex H.

MacBook Pro - connect to TV via HDMI Mini Display adaptor

Can't connect macbook pro to my TV and view/listen to what's on my mac on the tv. I am using an HDMI cable from the tv to a mini display port HDMI adaptor. When I go to system preference, display it doesn't have an Arrangement tab to mirror. It only gives me tabs for Display and Color. Any help would b appreciated.

Hello pdr4d,
Based on your post it seems you are unable to get video on an external display. The following article may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Unable to connect via wireless, printer is online.

I am using a Photosmart plus 209a via wireless. There are 3 notebooks connected. 2 will print but my Dell Studio (Win 7 Pro) will not. It was previously connected but now unable to connect. I have uninstalled all components using level 3 twice. Have used the Print/Scan tool. Downloaded the full SW package and the Basic driver SW. I process a job and it gets to the spooler and then "print job failed". I can view the control panel via IP address. I can view network settings and print wireless test page through HP Solution Center. Why am I unable to connect? I was able to use via USB but this is not an option.

It sounds like there is something different on the Dell Studio since it works from two other computers on the same network as the Dell Studio. It also sounds like you are able to access the EWS of the printer by using its IP address.
Are there any other errors messages regarding the printer? If so, what are they?
Is there a third party firewall installed (e.g. Norton, Kasperksy, BitDefender, etc.)?
Is this Windows 7 Professional 32bit or 64bit?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Officejet pro 8500A plus can not print from ethernet connect computer

Setup:
HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
Windows7 device & Printerhows printer is ok.
Once a job is sent to printer, show status printing for a while after the status will show error.
Now the status shows error
HP Print and Scan doctors shows printer ok.
But if you try to print the test page, unable to communicate to printer error comes.
Tool box can read all information about the printer

Please reload the drivers and software on the Win7 PC. Reconfigure and try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Notebook connecting to TV

Similar Messages

Maybe you are looking for