NoteBook HP 620.How can you make a System Recovery Disk on HP 620 Notebook?

The HP620 model is possible to recover the system using F11. This utility formats the hard drive and reinstall Windows 7 on the hard drive.
My question is:
You can make a copy on a DVD media operating system, such as is done with the Recovery Disk Utility on the desktop models?

Hi,
Click the Start Menu, open All Programs and scroll down the list to see if you have a folder called Recovery Manager - if you do, open it and see if it contains an applications called Recovery Disc Creator. If you have this application, double click it to launch the program which should then guide you through the process of creating a set of Recovery Discs.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization

How can you redo initial system setup macbook pro

How can you redo initial system setup macbook pro?

Like when Setup Assistant fires up and lets you migrate? In general, that would imply having to do a complete reinstall. And I've always been under the impression that when you do that, the reinstall software does not contain all the extra goodies that come with a new from-factory install (such as iLife).
But as Prof. Kappy wants to know, the specifics are very version dependent.

How can you make a field "key" in transformation rules - master data maping

Hello ,
We are in the process of creating some custom master data datasources for HR module. In this we are trying to extract fields from particular infotypes. In my situation we are pulling fields from only one table PA0032. From this table I am making a view where in I am selecting all the key fields from that table and including 2 other fields (Buliding name and room number). Now I create an ATTR master datasource with this view and check in RSA3 I see the data very good. All this is time dependent data like for Employee he might be in buliding AB room 32 first and then get moved to Buliding CD room 34. So we need to keep a history of the records. Now I replicate the DS in BW system, and create custom infoobjects for building and room no. I create an infoobject called Zworkaddress and dates I use 0VALIDTO and 0VALIDFROm. I make both the dates, bulding and room as attributes of ZWORKADDRESS. Now I map all the fields from datasource to the infoobject but field ZWORKADDRESS is on,y coming up as KEy field not the dates and subtype. Thats why I am getting only the last record not all the records of the emplyee work address.
We are using BI 7.0, so my question is how can I make the other fields as key's so that I can have all records.
Thanks in advance.

Kiran,
If you make any one time dependant system will create Dateto and date from internally. we don't need to add those.
1. for Employee, add Company Address as attribute. make this as Time Dependant. keep Subtype as Compounding key to your employer. then you will get Employee, Sub Type and Dates as key fields. you can have complete history of Employee Address change.
Hope this helps.
Nagesh Ganisetti.

How can you make an image adjustment on all images in a Stack

If one had a stack of images that need a brightness adjustment. How can you preform the adjustment a stack of images that need the same amount of adjustment?
Many times I have a stack of images that need a +10 brightness adjustment on them and it would save a lot of time if I could do it on a whole stack of images.

good points, as l/s takes every adjustment ... including autolevels/exposure ... BUT DOESN'T make them auto to the next image(s), it just lifts the current image settings !!! which is fine for a five shoot series all at the same exposure, but not so much when it is not !!!

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

Can I use HP System Recovery Disks on a new hard drive replacement with a lower storage capacity?

Can I use the HP System Recovery Disks from my HP Pavilion dv7t-4000 CTO Select Edition Entertaimnent Notebook PC when I replace the failing hard drive with a smaller storage capacity hard drive? Right now it is a Toshiba 750GB SATA hard disk drive, 5400 RPM, 2.5 inch small form factor (SFF) and I am planning to replace it with the Toshiba HDKCB26 500GB 2.5 inch Hybrid Hard Drive. I read that I cannot use a System Image to restore the hard drive because it is a smaller capacity then the original Hard Drive. If this is true, it seems that my only option is to use the HP Recovery Disks.

Hi:
Normally the HP recovery disks don't work on a smaller hard drive either, but it may be possible in your case if HP offered a 500 GB HDD in that model series.
No guarantees though.

How can you make phone ring but text vibrate

How do you set your phone to ring but all other notifications ie texts &emails vibrate?
This question is for iPhone 4 & 4s

As i mentioned up top, you can do this with a silent ringtone. I have read some app's have muted ringtones(don't know of the app name though) OR, GarageBand can make ringtones on Mac. (that is where i think you would need further explaining on, if you have Mac).
The silent tone will be set as text's tone (as the same if it made noise), it will vibrate two times quick...While asleep, awake, on a phone call, still texting, at almost any time i can think of, (other than powered OFF.)
I have recommended this method, for people asking as a regular ringtone, for telemarketer's, unknown callers, and other sort of people. And YES, you will need the Vibrate turned on.
Hope this helped.

How can you make an image change every time you refresh a page?

Hi.
I've recently redone my website and was wondering how I could make the image on my main page change every time you refresh the page?
Like is there a certain script you can use?
Here's my website
www.liamfawcett.com
Thanks

Copy & Paste the following JavaScript code between the <head> and </head> tags in your HTML document, in Code View of course.
<script type="text/javascript">

</script>
In the array, change URLs (http://www.example.com) to your own links. Change images (some_image.gif) to your own images.
Save page. Preview in browser. Hit refresh (F5 or Ctrl+R) to see the images change.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

If You Sync Notes Via iCloud, How Can You Make Local/On My Mac Notes?

I've you're using the Notes app in Mountain Lion, and your Notes are stored in iCloud, is it possible to make notes that are just On My Mac and not in iCloud? If so, how do you do it?

Choose Apple menu > System Preferences, and then click Mail, Contacts & Calendars.Open Mail, Contacts & Calendars preferences
Set up an account with Notes:
For an existing account:
Select the account, and then select the Notes checkbox.
For a new account:
Click an account type, enter your account information, and then follow the onscreen instructions.
I didn't need to set it up in ML but here's what Help has to say...

How can you make 3d models work in Motion 5 or Final Cut Pro for under 100$

How would you be able to make a 3d model appear in Final Cut Pro or Motion and work, for cheap.

Not sure what you mean by work or cheap but if you're looking to do 3D modelling on the cheap I'd suggest looking into Google Sketchup or Cheetah 3D- http://www.cheetah3d.com/. FCP X and Motion are not 3D modellers.

How can i make a password recovery in cdn 560

i try by cco,but i can't login,when i try login by root default, it prompt reboot 0#.
how can i do this job

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

How can you deny bash system access when sourcing a file?

I'm having another one of my "Linux noob" moments. This is probably easy to answer for the experienced bashers here.
I need a bash function to extract data from a PKGBUILD for use in other scripts. I want to write it in such a way that there is no significant risk when checking PKGBUILDs from possibly untrusted sources. It would be unreasonable to request the user to manually inspect every PKGBUILD when only extracting information (i.e. not building the package) and when dealing with many PKGBUILDs.
The function itself is very simple in the unsafe version:
for ARG in $@; do
source "$ARG"
echo "$pkgname $pkgver $pkgrel"
done
The reason that I want to source the file is to catch variable changes within the script (obviously missing the build function, but there are some that change outside of it). Parsing the file externally is likely to miss some changes.
How can I safely source the PKGBUILD? Ideally I want to completely limit access to the system, specifically the users home directory. Is there a way to do this as a user without write permissions? Is this what the "nobody" user is for?
I've considered using chroot but that appears to need root privileges. I want to avoid sudo.
Thanks.
Last edited by Xyne (2009-05-19 11:09:25)

Well, unsetting the PATH seems a good idea, but what if the pkgbuild contains sth like this:
pkgver=$(uname -r)
or any similar manner of dynamically generating one of the variables Xyne's interested in by using a command in a subshell? While the following works (i.e. fails as it should):
~$> OLDPATH=$PATH;export PATH="";/bin/bash -r -c 'foo=$(rm foo);foo=$(/bin/rm foo)';export PATH=$OLDPATH
/bin/bash: rm: No such file or directory
/bin/bash: /bin/rm: restricted: cannot specify `/' in command names
any legitimate use of command substitution will fail as well. Not to mention redirection, which is disabled in a restricted shell as well.
And yes, disabling (possibly) malicious bash builtins may be done as well, but it will fail as well if they are used in a legitimate way.
Using "nobody" also relies on the assumption that the user's files aren't world-writable. I think the only safe solution is using a chroot after all, but maybe I'm missing something here.

NoteBook HP 620.How can you make a System Recovery Disk on HP 620 Notebook?

Similar Messages

Maybe you are looking for