Notebook HP Probook 6560b not booting when my book essential is plugged in.

Dear sirs, 
My laptop will not boot when the my book essential is plugged in. 
The facts 
MY book essential 3.0 TB 
HP Probook 6560B 
My book works well, is installed in windows and works perfect. 
Drivers are up to date. 
However when i want to boot my pc the system freezes.Doesnt do anything not even the bios menu. 
When i unplug the my book it resumes the boot. 
I did the following things to solve the problems. 
Changed bios boot order in to primary hardisk first. 
Disabled booting for USB. 
USB legacy option is diabled in bios menu. 
I have contacted Western Digital but they say i have to change something in windows but don't know what exact.
I am really out of options and do no what to do, can you please help. 
Yours sincereley, 
Gerben Tierie

Hello Gerben,
Your ProBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • 210-4125 will not boot when windows 7 x64 is installed

    i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
    hoping that some one new might have had the same problem
    HP.......................................HP MINI PC  210-4125
    model ................................210-4125
    Bios ...................................F08
    ser no................................ [edited Serial Number by Moderator]
    product no.........................A8V56EA#ABU
    Ram ..................................4.0 GB
    system board ID............... 338d
    processor .........................Atom(TM) CPU N2800 1.86GHz
    Product configuration ID..0797200000204600000300100
    acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
    and i get a message on black screen  "you are trying to load an opperating system not compatable" or some thing like that
    it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
    if any one out there is running x64 bit windows 7 on the 210-400 range of netbook   can you tel me
    1. model no
    2.CPU
    3.Ram installed
    4 bios No
    thank you
    JB

    thank you George
    i will bear that in mind next time
    i see that you work for HP ? do you have any suggestion's for my problem ?
    as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded  , but i can not keep the drive connected ?
    i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
    when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
    i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment  ,  i think it is locked out from out side the bios and not from inside.?
    any  pointers in the right direction would be very helpful  ,
    many thanks
    John

  • Computer will not boot when I install my Sound Blaster Live Ca

    My computer wiil not boot when I put my sound blaster li've card in. Any body have any ideas that I could try?
    Thanks
    tbaker

    Turn off your pc, remove the jumper near the battary for 5 seconds, then put the jumper back.
    If it works go to BIOS and switch off (disable) Audio on Board or Sound on Board , (if you have it), then start your pc. Should work !!!
    I hope it helps!!!

  • W520 will not boot when docked; blue screen

    W520 fails to boot 100% of the time when docked. Blue screen shows SYSTEM_SERVICE_EXCEPTION, STOP x0000003B for nvlddmkm.sys
    nvlddmkm.sys is the NVIDIA driver, which is version 8.17.12.9620, the latest shown on the NVIDIA and Lenovo websites. BIOS is also the latest.
    Systems boots fine if I remove it from the dock, but it will not boot when docked.
    Windows 7 PRO SP1
    2 external monitors via DVI
    Any suggestions?

    Boot with Option held down. After the cursor changes to an arrow, Command-. (Command Period) should open and close the optical drive. After you insert the disc, click the curved arrow to have it re-scan the discs for boot volumes. Then select the optical drive and click the straight right-pointing arrow to start.
    Try it with the Apple Hardware Test disc first and run Extended Tests.

  • Why does the loan token not transfer when a book is transferred to a Nook?

    Why does the loan token not transfer when a book is transferred to a Nook?

    Hi laura,
    I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
    Also You might want to update your profile to reflect your current systems!
    quinn

  • Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w...
    Hi,
    just recently upgraded to Win Pro on my HP PAVILION A6109N.  I also bought a toshiba canvio desk 3TB.  What I notice is that if I reboot my pc with the extermnal HDD connected, my system will not boot.
    I have check my BIOS boot settings and the order of the boot.
    I have tried disabling USB Legacy Support in the BIOS
    I have reformatted the external HDD
    but still my desktop will not boot if the external HDD is connected....If I disconnect the external HDD...the system will boot up ....
    I am at a loss....*** scratching my head ***

    Update:  The only solution for me was to format the drive as ext3 and plug it into one of my Asus RT-N66U USB ports, as most routers don’t yet recognize 3TB drives as NTFS.  It’s not much help to people who don’t have a router with this capability, and it also slows transfer rates to ~12MB/s.
    Given the short length of the cable, your only other options are to have the 3TB Canvio sitting right next to you so you can unplug from a front USB port before each boot, or place it towards the rear of your desk and crawl under the desk to disconnect it from your PC prior to each boot. 
    It's a pity because Toshiba produce great internal HDD's, but my experience when it comes to external drives is they're simply junk.  I wish I had read the reviews before purchasing.

  • KT6V + sempron 2800 does not boot when BIOS saved

    Hi,
    I have just bought a new sempron 2800 to be use on a KT6V LSR. I plugget in my KT6V but was not recognised well (but all was working ok with windows). To be recognised, I have flashed with the last bios of MSI my motherboard... and now I have the following problem:
    - I clear CMOS, then boot. It comes ok (processor detected and set a 1200Mhz)
    - Then CMOS has a bad checksum: I enter setup, then load default, save.
    - I reboot: the computer does not boot up.
    If I re-clear CMOS I can re-enter setup and modify frequencies or other options. But when I save my modifications, then the computer does not reboot anymore (I have to re-clear cmos again)...
    I tried to apply the configuation I found in this thread:
    http://forums.amd.com/lofiversion/index.php/t69536.html
    It says that SDRAM must be at 333, FSB at 166 and multiplicator at 12. When applying this settings, it does not boot (the leds indicate that the chipset initialisation (the first step) does not pass).
    If I just load biios default, the leds indicates that it fails when checking the memory (second step of boot). I suspect that it's a problem of memory (but my memory was working well before !): it's 2x512 of DDR 400.
    Any suggestion is appreciated :D . I spent several hours trying to configure the bios but it does not boot..
    (I'll also try to find help on AMD forums...)
    (Some extra info: my PSU is 26A for 12V, so it seems that it's not due to the PSU (as I read in the FAQ of this forum).
    Thanks,
    Ptitmain.

    AMD Geode™ NX Processor Family & DB1500 Development Board
    Powerful Software Development Capability for AMD Geode™ NX Processors
    The AMD Geode™ NX processor family consists of three versatile and powerful products - the AMD Geode™ NX 1250@6W* processor, the AMD Geode™ NX 1500@6W processor** and the AMD Geode™ NX 1750@14W processor.***
    The AMD Geode™ NX processor family leverages advanced architecture to provide powerful solutions for a variety of Internet edge, peripheral applications, and more. The AMD Geode™ NX processor family provides the highest x86 performance for fanless operations.
    The NX processor family leverages Mobile AMD Athlon™ processor technology to deliver superior computing power for a variety of thin-client and other applications including point-of-sale terminals, kiosks, high-end printers and home media systems.
    Key features include:
        * Low-power consumption
        * Advanced 7th generation core
        * Long-term manufacturing and support
        * 128KB level 1 cache
    The AMD Geode™ NX processor family is supported by existing low-cost infrastructure, proven architecture and a long-term supply commitment.
    The Geode NX 1250@6W processor is based on an AMD Athlon™ core and demonstrates the company’s commitment to making enhancements to its x86 product offerings and delivering a full line of x86 products to market. The AMD Geode family of embedded solutions is part of AMD’s strategy to offer assets, resources and vision for extending x86 solutions from low-power embedded solutions up through the highest-performing server platforms. The Geode NX 1250@6W processor is a cost-effective solution for customers requiring sub-one gigahertz performance without a fan. Operating without a fan not only reduces design costs and allows for better power management, but also allows the processor to co-exist in virtually any environment because it can operate silently.
    The AMD Geode NX 1250@6W processor broadens the selection AMD’s customers have for x86 solutions that range from sub-one watt to 14 watts, allowing them to choose a processor that best meets their individual design needs.
    .13um fabrication process
    128/256KB L1/L2 cache
    266MHz Front-Side Bus
    Floating Point logic
    AMD PowerNow!™ technology
    Less than 6 watt  maybe i should replace my PSU with battery (typical) to 9 watt (maximum) Total System Power Dissipation
    Socket A compatibility
    3DNow!™, MMX™ and SSE Instruction Set

  • HP Z620 does not boot when external Seagate hard drive is connected

    I'm troubleshooting an HP Z620 workstation with 32GB RAM, one 500GB HDD + one 1TB HDD running Win 7 Enterprise 64 bits, this user has 2 external USB 3.0 HDDs,  one Buffalo 2TB  + one Seagate Desktop Backup Plus 4TB; the problem comes when the external Seagate HDD is connected and the PC is turned one, for some reason the PC does not boots, it shows a message that states "Non-disk or no boot disk error" and sometimes it tries to boot, but then goes thru the "Windows repair option" or "Start Windows normally" routine, none of these results on starting the PC.
    The only way this PC starts and works properly is when PC is started with the external Seagate HDD disconnected and then connected once the Win 7 is up and running; the problem described above does not happens with the external Buffalo 2TB HDD and the Seagate HDD have been tested throughly and no errors or problems have been detected on it.
    I'll really appreciate your attention to this, as well as your prompt response.
    Regards,
    Gaspar Campos

    Hi:
    You may also want to post your question on the HP Business Support Forum -- z Workstations section where there may be more folks familiar with that issue.
    http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.U1k4uv1OXGg

  • System does not boot when PCIe express Card is inserted in system. Using Spartan-6 PCIe Integrated Endpoint Block 1.3

    Hi,
    I am using Spartan-6 PCIe Endpoint Block core v1.3 and I am using ISE 12.1. I have used the PIO example design,
    modified it according to our design.
    The core is configured as below:
    BAR0 - 8KB, 32-bit, Memory Type
    Lanes - x1
    Clock - 125 MHz (system clock)
    The card is a custom board. When the card is pluged into the system the system does not boots, it hangs.
    I have tried debugging using chipscope and monitored trn_lnk_up_n, trn_reset_n and trn_clk. trn_lnk_up_n stays
    high (deasserted), trn_reset_n stays low (asserted), trn_clk is low (No clk).
    What might be the issue?
    Thanks & Regards.

    Thanks Gabor, for the response.
    I refered couple of answer records like AR# 34873 and AR# 34894, I monitored trn_reset_n, sys_reset_n, clock_locked, PLLLKDET and RESETDONE signals as suggested in AR# 34894.
    Status as follows:
    SYS_RESET_N = 1 (deasserted)
    TRN_RESET_N = 0 (asserted)
    CLOCK_LOCKED = 0 (deasserted)
    PLLLKDET = 0 (deasserted)
    RESETDONE = 0 (deasserted)
    which means the transceiver PLL frequency is not within the predetermined tolerance. Is this problem related to the PCIe Jitter Attenuator I am using on the board to derive 125MHz from 100MHz system Clock.
    Thanks & Regards

  • Windows Server 2008 R2 Does not boot When Back up drive removed

    I have a windows Server 2008 R2 Standard server RAID 10 installed.  I  have a non raid drive installed as the backup HD.  The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
    a boot drive.  I have been searching for solutions and cannot find any.  Any ideas?

    Hi,
    Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
    At current situation, first please test to connect the failed disk back to the device and see if it will help.
    Or you may need to run a boot-up repair with an installation disk. 
    If you have any feedback on our support, please send to [email protected]

  • HP ProDesk 490 G1 MT does not boot when external "WD - My Book - 4 TB - USB 3.0" is connected

    I'm troubleshooting an HP ProDesk 490 G1 MT.
    Intel Core i7 - 4770 CPU @ 3.40 GHz GHz
    16.0 GB RAM
    Windows 7 Professional Service Pack 1 - 64 bit
    HDD 1 GB
    HP doe's not boot if any external hard disk drive is connected. All dimensions and all brands, USB 2.0 or USB 3.0
    PC don't boot even if I command from BIOS to boot via internal hard drive.
    It try, I see Windows is loading, but then i see the PC is searcing a boot system, a MAC address and then it is lost and alone until I disconnect the external hard-drive ...

    The fact is that I have four Acer (2 desktop, 1 nettop, 1 Netbook) and 1Notebook HP (2006/2007) that not have this issue.
    When I connected the first time this morning the external hd, my mouse Logitech M570, trackball - wireless, went crazy. I searched and found a solution on Logitech Website.
    More:
    I wrote:
    ... " ... All dimensions and all brands, USB 2.0 or USB 3.0 ... " ...
    But is too long on Verbatim, Toshiba, WD, Samsung, Freecom, Lacie, sites.
    But "Never say never again", I tried and the site WD is unavailable.
    On the other hand is a common issue on HPs, I  can see on this site.
    I'll try the solution at:
    http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Pc-hangs-at-hp-boot-screen-with-external-...
    of "jako 1x4". It didn't work for "MrWoogy", but I have a USB 3.0 hd.
    Tank you for your doctrine and wise advise.

  • OS X Lion does not boot when my Time Machine disk is connected

    Everytime I boot or reboot my MacBook Pro I am stuck at the grey screen and OS X Lion will not boot. When I disconnect my Time Machine disk (external disk connected via usb) I suddenly get the loading screen and OS X Lion boots properly.
    Pretty anoying I think, does anyone have a solution for this problem?

    Have a look at the boot log messages, using Console.app (also with the "dmesg" command), and see if there's a clue there, or, set the boot process logging to "verbose" (i.e., using TinkerTool System) and find out what's really going on live at boot time.  (Also, do you have BootCamp setup, or any ofther bootable partitions?)
    Hope this helps.

  • Issue with PC not booting when PCIe 8360 attached to controller PXI 8360

    I am using a PCIe 8360 in our Windows 7 PC and connecting it to a PXI 8360 controller in a Pickering chassis.  When I connect the mxi card to the controller and try starting the PC, the PC will not boot.  Has anyone seen this issue and if so, what is the problem/solution?

    It sounds like this may be an issue with BIOS compatibility. I have included some more information below. I would recommend upgrading the BIOS to the latest version and seeing if that resolves the issue.
    http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm
    R. Brill
    Applications Engineer
    National Instruments

  • MBP will not boot when a USB/USB2 Device is plugged into either USB port.

    MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
    It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
    As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
    "The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of hub @ location: 0x6000000)."
    The above error may or may not be related.
    ........AND BEFORE ANYONE SUGGESTS IT, YES I HAVE ZAPPED THE PRAM and reinstalled the OS from new MBP Install Disks from scratch! Still occurs.
    Hope someone can also validate what I've wrote with the newer MBP, as well.
    Many Thanks!

    JKosh wrote:
    MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
    It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
    As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
    I'm having exactly the same problem with my MacBook Pro.
    It's either the usb hub or simply the iphone... every time I need to boot my macbook pro I have to disconnect every device. It's getting quite annoying.
    The previous 17" Powerbook G4 had no issues.

  • System will not boot when Aironet 802.11a/b/g adapter installed

    I have an HP 8000 Elite sff that will not boot after installing the adapter. I am running XP sp3. As soon as I remove the adapter, it boots fine.???

    Which adapter ? Aironet 350 or CB21 ?
    Do you have another similar adapter to put in the laptop to try ?
    Is the problem new ? did it suddenly happen ?
    Nicolas.
    ===
    Please rate answers that you find useful

Maybe you are looking for