Notebook pavilion dv2520ea RAM upgrade
Can I upgrade the actual RAM (2x512MB PC2-5300 DDR2 667MHz 200 pin) using 2x1GB PC2-6400 DDR2 800MHz SO-DIMM 200 pin, and the notebook is able to really run this RAM at 800MHz?
Thanks.
Hi,
You can upgrade to 2Gb of RAM but this will only run at 667 MHz. An example of compatible memory modules is on the link below.
http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv2520ea
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
I would really like to play computer games on my laptop but they all lag really bad. I was wondering if upgrading the RAM for the system would help or if that's even possible. I have a 4 gB RAM right now but I would like to upgrade to 6 or 8. I think the product number is QE304UA#ABA but that could be wrong. Does anyone know what I can do?
P.S. if I have the wrong product number and it's blatantly obvious, just let me know and I'll try to find the real one.Hi,
The following link shows the specs and model of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02974952
You can use the following information to buy more RAM. You can buy from them or use the info to buy elsewhere:
http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+g7-1219wm-upgrades.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hp Pavilion dv6765ev RAM upgrade
Hi all,
I have an Hp Pavilion dv6765ev notebook, which I own since April 2008. It came with a total of 2GB RAM (2x1GB). Since it is already 6 years old, I am making some changes (for example, I ordered an SSD to replace the original HDD disc), and I was thinking of upgrading RAM.
I would like to be sure what RAM to buy. If I am not mistaken, I can upgrade up to 4GB, it's DDR2 (2x2GB)? For example, is the following kit ok?
MUSHKIN 996559 4GB (2X2GB) SO-DIMM DDR2 PC2-5300 667MHZ DUAL CHANNEL KIT
Do you have a specific brand to propose? What should I pay attention to?
Thanks in advance!
Corina
This question was solved.
View Solution.Hi
This is the manual: http://h10032.www1.hp.com/ctg/Manual/c01295877.pdf
Specs: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCache...
The RAM config you chose is correct for your system.
The brand details I don't know, but it had good rating in newegg-
http://www.newegg.com/Product/Product.aspx?Item=N82E16820146697
You can put the 2 memory sticks replacing the two pervious ones.
For related info:
The part numbers listed in manual for replacement if ordering via HP post store are:
http://partsurfer.hp.com/Search.aspx?SearchText=453774-001
http://partsurfer.hp.com/Search.aspx?SearchText=457437-001
They are replaced by this new part -
http://partsurfer.hp.com/Search.aspx?SearchText=598858-001
http://www.amazon.com/gp/aw/d/B00350GJWA?pc_redir=1407318668&robot_redir=1
So, 800MHz is backward compatible with 667MHz too.
This CRUCIAL RAM is a good one too:
http://m.ebay.com/itm/Crucial-4GB-Kit-2x-2GB-DDR2-667-MHz-PC2-5300-Sodimm-Memory-RAM-200-pin-Laptop-...
Regards ,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
I was given a pavilion dv6325us notebook with vista home premium 32bit, running an amd turion64x2 tl-52 (1.6 ghz) with 1 gb ram. My researh suggests that I can upgrade the ram to 2gb. But I found a similar notebook, HP Compaq 6715b with vista business 64 bit with the same processor and that review said it could take 4 gb of ram. So, should I go to 2gb and be happy with that, or can I upgrade to 64 bit os and possibly run 4 gb of ram?
Only 2GB max memory is recommended for your notebook dv6325us. It is risky to use 4GB on your unit as I am not aware of any testing being done at hp or even successful installation from any customers.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
I have a DV2217EA Pavilion Notebook. Currently, this has 2x512MB RAM (512MB PC2-5300 DDR2 667 SO DIMM ). I want to upgrade this 4GB (2x2GB) using HP Partsurfer part number only and order it. Can anybody suggest a compatible RAM for this?Thank you.
My laptop PN is RZ983EA#ABB bought in Dubai.You cannot go higher than 2 gb (2 x 1 gb)
Crucial -
Help please - I really want to upgrade my RAM on my Pavilion tx2050ea laptop - can i replace the 2 x 1GB memory modules with 2 x 2GB makeing 4GB in total???
Hi,
According to Kingston page which is here Your model supports 4 GB. So answer on Your question is yes.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
HP Pavilion a1340n Ram upgrade
HP Pavilion a1340n Media center Pc.
Yr. Manufactured 2005
640 Intel pent. 4 processor
250 GB hard drive
1.0 GB memory
32 bit system
My machine has 2 memory slots in the mother board, it has one 1GB, DDR2, 533, CL4 memory card in it.
I was told a 32 bit system will run 4 GB of ram will it ?
The ram I am looking to purchase is.
Dell 4GB, 2x2 GB PC2 6400 800 duel channel non-ecc DDR2.
Is this proper ram for this machine ?
If not please recomend.
Also what is the difference in ecc and non ecc ram ?
Thank you for your help. Oddball
This question was solved.
View Solution.Oddball1959, welcome to the forum.
Here are the Motherboard Specifications.
Here is the memory that is supported by HP and the motherboard:
Single-channel memory architecture
2 x 240-pin DIMM sockets support unbuffered non-ECC 400/533 MHZ DDR2 memory modules
Maximum HP/Compaq approved memory is 2 GB
The maximum memory is 2 GB (1GB x 2). This is a 1 GB stick in each slot.
The maximum memory for a 32-bit OS is 4 GB (3.25 GB actually usable). However, HP has only allowed for the 2 GB maximum in this motherboard.
This guide will explain the difference in ECC and non-ECC memory.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Hi, I've hp pav-dv9590-et and (1*1)2gb ram. I want to raise my sd ram. But i don't know the limit.
How much memory can I upgrade?
This question was solved.
View Solution.uselka wrote:
Hi, I've hp pav-dv9590-et and (1*1)2gb ram. I want to raise my sd ram. But i don't know the limit.
How much memory can I upgrade?
Hi,
According to the specs 2x 2GB is maximum supported by the laptop..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"* -
Pavilion a705w RAM upgrade, OS XP pack3
Comuter was running good with 2, 512mb RAM cards. I replaced them with 2, 1mb cards which one of the 2 was bad. When I installed the cards and turned on the computer I got no display on the monitor, I then touched the new cards and found one of the two was very hot. I turn off the computer immediately, took out the new cards and put the originals back in but the computer never came up again. I am a EE rather familiar with computers. I looked around and noticed I had no power on the Keyboard, Mouse, and CD dr. CD dr will not ejeck unless I remove the data cable. Tried it on 3 other monitors it just dont work.
Analyses: Suspect Power Supply.
I would like to get a wiring diagram to check the Power Supply, If anybody can help will be appreciated.
This question was solved.
View Solution.mannyrealy wrote:
Comuter was running good with 2, 512mb RAM cards. I replaced them with 2, 1mb cards which one of the 2 was bad. When I installed the cards and turned on the computer I got no display on the monitor, I then touched the new cards and found one of the two was very hot. I turn off the computer immediately, ...
Hi,
Given this, my feeling is you have burnt the motherboard of your machine. Much better spending time to check the motherboard rather than check other components.
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
RAM Upgraded But Not Usuable !!
Hello. Please Help.
HP Pavilion Notebook - 15-ab032ax Ram Upgrade to 8GB as because there is 2 slots. 2 RAM are Same in All.
IT shows in Bios that ram 8GB also in PC properties. But usuable only 3.45GB. Why ?? Running x64 Win 8.1Number 1 :: Tried :: Result :: Blinking Black Screen, Without Stoc HP RAM. Number 2 :: Tried :: Result :: Blinking Black Screen, Without Stoc HP RAM.
Please Help. I cant use any RAM without Stock HP RAM.
I want to use 8/16 GB. Is there any lock settings in BIOS ?? or something like that ??
Thanks. -
Memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
What memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
Max RAM? Vista? Windows 7?I can't find a dv5-1198de but I did find a dv5-1198er which should be similiar. It states up to 8 gb of ram. HERE
I would try www.Crucial.com for suggested memory ,you can use their Scanner Tool to let it detect what you have and what you can upgrade/replace with.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Change HDD with SSD in Notebook HP ENVY 15-k000nl - Warranty expiration - Maximun RAM Upgrade
Good morning,
I have bought the above notebook one week ago, in the HP main site there wasn't photo about the rear and when I saw there is no easy way for chanhe HDD to SSD, I have to unscrew about 15 screws located here and there
Just I would like know if I change the SSD the warranty will expire?.
At the same time please can I upgrade the RAM to 16 GB DDR3L? which is the Maximun RAM Upgradable?
Best regards
ChristianHi, Christian:
Yes, if you replace the hard drive or memory, the warranty will be voided as neither component is a DIY (do it yourself) project.
Please see the service manual at the link below, chapter 6 for the authorized service center removal and replacement procedures for those components.
http://h10032.www1.hp.com/ctg/Manual/c04409752.pdf -
Hi. İ have a HP J7T61EA 15-G018ST. i want to upgrade my Ram to 4gb but i did research on the internet and find out that my pc has DDR3L 1333 ram... if ı buy 1600 is that competible or where can i find competible ram?... and can i change it my self or i have to send the notebook to the service? i still have the warranty...
Hi,
Please check the page # 2 for more information about the RAM upgrade
http://h10032.www1.hp.com/ctg/Manual/c04513485
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
RAM upgrade on HP EliteBook 8730w
Hi, I just bought two new hynix 4GB SODIMMs (4GB 2Rx8 PC2-6400S-666-12) and tried to install them into my laptop without luck. The computer starts with black screen and after a second or two the numlock and caps lock indicator LEDs starts to flash in blocks of three. The computer won't boot past this. From what I can gather 8GB RAM upgrade is possible and the mentioned RAM should be the correct one. Could either or both RAM sticks be faulty? Any help is greatly appreciated!
Hi,
Generally, it's best to upgrade memory with matching modules so a suitable upgrade can be seen on the following link.
http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv6-3225dx&Cat=RAM
If your notebook already has 1 x 4Gb Module and you just wish to purchase an additional one, use an application such as CPU-Z to match the specifications to your existing memory ( check the Memory and Spd tabs ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HP dv6-6c75sa Windows 7 64-bit RAM upgrade
I am running an HP dv6-6c75sa on Windows 7 Home Premium 64-bit, with an Intel Core i3-2350M processor. My installed software is a combination of 32- and 64- bit compatible.
When I purchased the computer, I installed a RAM upgrade which took the total onboard RAM to 8GB. Due to a system issue which I cannot now recall, a search query informed me that my system would only recognise 6GB of what I had installed.
My computer is now 2 years old, and to extend its lifespan, and help it keep up with a recent software install which it cannot seem to cope with (Native Instruments Traktor 2, and Kontrol S4; I would like to make a new RAM upgrade.
I think that the reason only 6GB of my 8GB installed was recognised, may have had something to do with the 32- vs. the 64-bit system, but I can't be sure.
I know that the maximum RAM for Windows 7 Home Premium is 16GB. What changes could I make now that would allow my system to work at or near 16GB of RAM capacity?
Also, where I have a mishmash of 32- and 64-bit software, on a clean install running 64-bit, I believe that I should be able to get all of my software running again. Are there any traps I should look out for that may hamper this.
Do you think that my processor is the thing that is limiting my RAM capacity?
I would appreciate your input.Hi @hyfpxm ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6c75sa Notebook and concerns with system recovery.
Here is a document on performing a system recovery. Here is a document on troubleshooting issues with performing a system recovery.
Always back up important information before attempting a recovery.
This system supports up to 8 GB DDR3 10600 1333-MHz and I would recommend 2- 4s. Here is a link to the manual page 60 for the memory. If the specs are correct for your memory I would reseat it.
Use the built-in Windows System Information utility to view information on Operating System, CPU type and speed, 32Bit or 64Bit design, and installed RAM memory. The section marked Find specifications using Windows System information.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Maybe you are looking for
-
How do I convert this Applet to launch from a JFrame instead??
A simple program where the user can sketch curves and shapes in a variety of colors on a variety of background colors. The user selects a drawing color form a pop-up menu at the top of the applet. If the user clicks "Set Background", th
-
How to open a new window from submit button &dialog page in current window?
We have a requirement, wherein we have a OAF search page for PO lines with search criteria, Go button to search ,result region (table layout) and a submit button(Create new expedite). 1. Now user can select some lines from result region and click on
-
Setting background color for a row
hello all, how can set a particular row with background color, say for button click i will say the row number, than the that row should be colored. give me suggestion thanks daya
-
Duplicates in iTunes folder but not iTunes
Hi, Through Spotify I figured out that my music library on my Mac contains duplicates of many of my songs. Since this is a problem in the User > Music > iTunes folder, the usual "Find duplicates" won't help. I have over 5,000 songs, so is there any w
-
I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player. Thanks for any help you can offer,