Notebook shuts down shortly after start-up!

I have a slight puzzle on my hands. I was working on a DV5-1012EA which had a damaged palm rest/touchpad. I found a replacement and fitted it fine. I had the notebook running fine and decided to run windows update. It all seemed fine but after a restart (which seemed normal after a windows update) it then decided to shut down. I tried a few restarts but no joy.
I then used a recovery disk but it was halfway through the second "loading files" and it shut down.
I ran the system diagnosis test via ESC menu and the memory tested fine, it shutdown half way through the HDD test.
I tried to boot a Linux live disk with no HDD but once again it failed.
I booted into the BIOS but after 3 mins it shutdown again
I have tried separate HDDs and memory but it makes no difference. The system just shuts down.
Could it be a coincidence this occurred after the Windows Update? I have changed the hardware so any conflict caused by the update would not be there.
I can only think it is overheating the CPU and/or GPU and hence it shuts down? Perhaps all the work of dismantling the until to replace the touchpad/palmrest dislodged the heat sink/thermal paste?
Please can someone advise me because I want to get this thing running again and back to my friend?
Thanks in advance
Changy
This question was solved.
View Solution.

If you boot into the BIOS and let it sit there (don't run diagnostics) does it still shut down?
If so, I would assume it's overheating or there's some other circuitry problem.

Similar Messages

  • TS3276 Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Will I lose my emails I have on there? I have numerous client email files and can't afford to lose any of them. I do have everything backed up but I'm fearful of losing important client info. What if something happened during the back up and it doesn't have my files?

  • MSI GT70 2PC shut down shortly after start

    I bought MSI GT70 2PC-1889CZ Dominator. BIOS E1763IMS.51B, the same problem with BIOS E1763IMS.51V. There is one SSD disk there and one HDD.
    And problem? When I press the power button, my NB automatically turns off during 2-3 sec (before starting windows 8). But when I press the power button again, it starts without problem. I have the same problem everytime. First try - turn off, second try - no problem. My nb never turns off during playing games, or working in windows, only shortly after I press power button. I tried other battery (the same model), this problem occurs without plugged charger and with plugged charger too...

    Try update IRST driver.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24006

  • Macbook pro 2012 shuts down right after start up!

    macbook pro 2012 shuts down right after start up. I tried the recovery mode but disk doctor cannot repair Mac osX hard drive.This is the second time that I have to format hard drive and install agin all applications. please advise!

    I am not familiar with "disk doctor" but if you used Disk Utility to repair or reformat the hard disk, and it failed again, it is very likely the drive itself needs to be replaced. It cannot be repaired.
    If Disk Utility cannot repair a hard disk it definitely needs replacement.
    All 2012 MacBook Pro models are less than a year old and therefore covered under Apple's standard one year warranty. Have them fix it.

  • Mac Mini auto shuts down shortly after startup chime...what should I do? Thanks.

    Our boss brought a mac mini model A1176 from the US to be used by her staff here in the Philippines. We powered it up- everything was working. Then it just stopped working after onen day. Whenever it is powered up, the mac mini auto shuts down shortly after the startup chime. What's wrong. How can we fix it? Thanks a lot.

    Troubleshooting: My computer won't turn on
    Mac doesn't boot

  • E5-00: Ovi Maps shuts down immediately after start...

    Recently, my Ovi Maps got some sort of error/problem, which I dont understand, nor dont know what to do about it.
    When i open Ovi Maps, it automatically shuts down after a few seconds.
    I tried to update to the newest version, when went succesfully. However, the same error remains, it still kepss shutting automatically.
    Does any know what this is causing, and/or how it can be solved?
    Im using an E5-00, firmware version 042.014.231.01 (latest version).
    Thanks in advance!
    Solved!
    Go to Solution.

    @thamaestro
    If you update from OVI Maps v3.04 to v3.06 old map data from 00.01.25.114 has to be deleted and new data from 00.02.42.122 downloaded. Are you saying that you watched new regional map data being downloaded and installed as this takes quite a while?
    If you haven't downloaded new map data, would suggest that you delete E:\cities & .qf file, re-start OVI Maps application upon device to re-initialise and re-create necessary folder structure.
    Happy to have helped forum with a Support Ratio = 42.5

  • Mac book shuts down right after start up

    my macbook shuts off after initial start up

    Assuming no issues with power adapter or power source, do an SMC and PRAM reset. If those don't work, take it in to Apple for service.
    SMC:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    PRAM:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Mini shuts down just after start up

    Any advice would be appreciated.
    My mini seems to start up OK (chime, light, no flashing) but after a few seconds, it shuts down. The monitor never has a chance to come on. After repeatingly trying to turn it on, it eventually does come on with no visible problems.
    I have unplugged and repluggd cables, removed connections to my USB network, reset the PRAM, checked drive capacity, checked keyboard for stuck keys, ran a virus checks, etc. I have no software that automatically comes on at start up rather than Norton Antivirus.
    I am using a USB hub and it powers up when the computer does and shuts down at the same time. It, however, is self powered and the Mac Mini acts the same way even when disconnected from the hub.
    OS: 10.4.8
    Machine Name: Mac mini
    Machine Model: PowerMac10,2
    CPU Type: PowerPC G4 (1.2)
    Number Of CPUs: 1
    CPU Speed: 1.5 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 1 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.4f1
    My set up has been working well for a year. Any ideas?

    Welcome to the Apple discussions.
    Your power management unit (PMU) settings may have become corrupted. See this Apple note to do a reset: http://docs.info.apple.com/article.html?artnum=300574 . When you say you reset the PRAM, is this the procedure you followed?
    Have you tried a safe boot? First unhook everything but a monitor, keyboard, and mouse. Boot while holding down the shift key. This triggers some background maintenance that may help get you going.
    If that doesn't fix it, I might try to run the Apple hardware test, if your machine has power long enough to swallow a CD. Insert the first OS X CD that came with your system and reboot holding the option key down. Choose Apple hardware test, and when prompted, the extended test. If you're able to run it, does it tell you anything?

  • TS1702 My iPod apps, even the apps provided by apple are shutting down randomly. I can access them but they shut down shortly after I do so. What's wrong and how can I fix it?

    My iPod fourth genereation is closing apps down randomly shortly after I open them. Even the apps that were provided by apple won't stay open long. I've tried everything they've suggested and nothing has worked. What's wrong with my iPod and how can I fix it? I even reset the entire thing to factory settings and it did nothing.
    Also, my back camera won't work most of the time and when it does red scratchy lines appear all over the screen and the picture won't come out clear.

    I think I fixed the apps, though.
    *Turn off your wifi and only turn it on when you want to use it
    *Lower your brightness
    *Turn off "Push" on notifications and mail and turn on "Manual"
    *Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
    *Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
    See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then.

  • My iDVD Themes wont load and the program shuts down shortly after I choose a selection.

    It's acting like it doesnt know where to look for the themes but I have deleted everything and tried to reinstall three times and it still doesnt work. It's from iLife 09. iMovie works just find but again when I try to burn to iDVD it looks for themes and shuts down.

    Have you run Disk Utility to repair disk permissons after installing?  Check in the Library/Application Support folder to see if there's an iDVD folder with a Themes folder inside.  If not check in the ~/Library/Application Support folder.
    When you find them open iDVD, go to it's Advnaced preference pane and point iDVD to the location of the themes folder.
    OT

  • System shuts down immediately after starting

    I have performed a system copy using a procedure that worked great for me in the past. The target was an new empty iSeries that has never been used before.  Everything seemed to copy just normally.
    The problem is this:
    I log on as <SID>OFR and start the system with option 2 from the R3TASKS menu.   The usual work process jobs start up and immediately shut down.
    The WP jobs have this in the job log:
    CPC1224
    Message . . . . :   Job ended abnormally.
    Cause . . . . . :   A SIGKILL signal was received for the job. The action for the signal was to terminate the job.
    Any suggestions of how to determine the cause here?
    Thank you
    Alan

    Jurgen,
    Thanks for your reply.  You are right, the key was in that file. (Volker also pointed me in that direction). For some reason it had a name for my server that was not in my CFTGCP #10.
    WARNING => DpNetCheck: NiHostToAddr(PTC02.PTC) failed (rc=-2)                                                   
    I do not know where it got that address from.  It is close to the correct address but because it was not exactly correct the network access failed.  Once I made the change the jobs stayed up.
    On to to the next problem....
    Alan

  • Why does my MacBook abruptly shut down shortly after being wakened?

    This has just begun happening within the past two days; I've used my MacBook every day since 8/10 without problems. When I wake it from Sleep it abruptly shuts down either within a few seconds, or while I'm connecting to the internet, or at least within minutes of waking it. No Application needs to be or usually is running. Power cord and external modem are the only connects. My last third party download a few days ago was the latest update of Stuffit Expander. Apple Hardware Test shows no problems. I can start it back up by pressing the power button for five seconds or by Command/Control->press Power button but it sometimes shuts down again within seconds. What's the problem? TIA.
    MacBook 2.0 Mhz Mac OS X (10.4.7)
    MacBook 2.0 Mhz   Mac OS X (10.4.7)  

    But I wonder if I could get some advice as how to
    proceed at this point. Should I even bother to try
    some of the prelminary fixes like resetting the PRAM
    since nothing but hardware repair seems to work?
    Should I even bother to call Apple Support first or
    should I contact the Mac genius at the store where I
    bought it?
    You should do a backup as soon as you can, since most people report that once the problem starts, it gets worse until the machine may become completely inoperable. And there's a chance that the hard drive will be wiped during repair.
    Apparently most, if not all, Apple Stores will send it in for repair rather than do it in the store. I had my repair done by contacting AppleCare directly. They will send you a shipping box, and you pack your machine and send it in. This, and return shipping, is via overnight shipping, DHL or FedEx, in the U.S. The time to repair depends on availability of parts. Mine was done in 48 hours; others report delays of weeks.
    I've owned an original iMac Rev. A since they first
    came out and have NEVER had a problem with it
    requiring hardware repair. I'm a newbie to this
    aspect of the game.
    Same here.

  • ITunes shuts down immediately after start-up, while accessing the iTunes store.  MacBook Air OS 10.6.8

    I cannot access iTunes.  It shuts immediately afyer start-up.  I upgraded to 10.5.1andit gets to the point of contacting the iTUnes store when it shuts down.  Any suggestions?

    Well before you try unistalling itunes and all that try right clicking on it and running it as administrator. It worked for me.
    But in the event you do have to unistall, make sure you consolidate you library first library>organize library>consolidate. Then do all that or you will loose all your playlists, and if you have alot of music on your computer you don't keep in itunes it will be a long process to put everything back in it, or weed out the songs you don't want in there.
    Also if you do the second idea make su eyou restart your computer before you open itunes again.

  • Idvd shuts down shortly after opening

    I am trying to make a dvd of a 5 minute movie I created in iMovie and sent to the media browser.  I open iDvd, name the project and the iDvd window opens and begins to play.  After about 10-15 seconds it shuts down and I have no idea why.  I made a Dvd about a month ago with no problem at all.  Any ideas?

    Hello Dude420,
    Thanks for the question. Based on what you stated, it seems like the iDvd app quits unexpectedly. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    OS X Mavericks: If an app freezes or quits unexpectedly
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • MBP shuts down right after starting up. How do I get it to stay on?

    I shut down using a Dockables power-off icon and now when I try to power the MBP back up, it gets the desktop screen then shuts down again.

    Try to boot up in safe mode by holding the shift key down when the computer starts up:
    http://support.apple.com/kb/HT1564

Maybe you are looking for

  • How can I delete a storage account

    Hello, How can I delete a storage account from an expired trial account. When switch from a trial account account to a pay as you go account I forgot to delete the storage account. The storage and storage account is inaccessbile now. How can I delete

  • Missing web content options and Preview in Folio Overlay panel

    Hello, After placing a .oam file into a folio and while it is selected, when I click on the Folio Overlays panel, the web content listing options do not show up at all. Nor is the Preview option available. I saw and used them before when I was workin

  • Clean install of Lion on MacBook Pro

    Hello - I have been using Lion for a while now, with no problems, but am now having permission problems with such actions as emptying trash, downloads, upgrading certain apps, using Dropbox, etc. I think it has something to do with my user settings,

  • USB ethernet isn't showing up.

    So I am trying to do some things with my networks on my macbooks, but something is bothering me greatly.  On my 2011 macbook pro, when I use my ethernet to USB adapter (as my ethernet port is broken), it gives me the option to use Thunderbolt bridge

  • Adobe flash pro cs6

    Start adobe flash professional design loading libraries and disappears