NoteBook speakers rare Problem

hi all,
my problem is that i cant listen music for the speakers of the laptop, sound only work with the jack plugged but strangely when i use for example skype who take the jack interface , the music start to sound in the speaker, i try all diferent combination in sound interfaces control panel
mybe a problem with drivers... i can only listen in the internal speaker if other program is using the jack interface , in other way no music can be hear
I was searched in the forum for related topic but nothing 
thanks.!!!!

I just read a test about a MSI GX600, they says that it has about a 144 minutes autonomy, I don't think that the wifi module is using so much power so, you're probably right, there is a problem somewhere.
On my MSI GX 700, I have a greater autonomy on Vista than on XP, but if you just bought the computer, I suppose you use Vista.
Does you fan is working at maximum speed all the time or something like this ? (it's very noisy when it's at max speed)
You can check with Riva Turner and CPU-Z if the GPU and CPU are well clocked down when on internet or stuff like this (not in games).

Similar Messages

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

  • X-Fi Notebook has a problem with headset/line-in

    0X-Fi Notebook has a problem with headset/line-in` First the basics:
    -HP Pavillion dv6000
    -Intel Core 2 Duo @ .83 GHz
    -Windows Vista Home and Student (SP) 32 bit
    -3 GB RAM
    Ok, now the problem:
    -Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
    Thanks guys

    Hi,
    What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
    Message Edited by flipflop on 03-29-2009 09:03 [email protected]

  • USB Notebook speakers

    I had such a good experience last time when I asked for your help--let's see if you can go 2-0.  
    I have a T61 ( 7662-CTO ) running Vista Ultimate 32. Since I upgraded to Vista Ultimate and since my company fiddled with my computer, I have had to reinstall some drivers.  I have some external notebook speakers that plug into my usb port.   They are made by Insignia.  (Model: NS-NBSPK).  They are basically el cheapo speakers I bought at Best Buy but I like them just fine.  
    Anyway, they are no longer working with itunes.  I went in audio properties and did a "test" and sound comes out of them then.  But that is the only time.  I was thinking I would update the driver since the driver is dated 2006.  But the only drivers I have found on the web I am scared to use because I don't know the source.  What do you recommend I do?

    No gurus are willings to step up and offer a suggestion to try?

  • HP Notebook speakers play while headphones are plugged in, at random intervals

    On my HP Pavilion g6-1b39wm Notebook PC running Windows 7 64-bit, I'm having an issue with my headphone jack; when I have my headphones plugged in, sound will switch back the speakers randomly, and then come back to the headphones after a couple seconds. As best as I can remember, I haven't made any changes to the computer that would cause this, and the problem still occurs regardless of what headphones I'm using.

    same problem. i've scoured the web (or rather, browsed) and found that this isn't an uncommon problem with the newest IDT Codec Drivers. HP 3105m here. It's driving me crazy. I'm figuring that rolling back the drivers might do the trick, but can't figure out which version would work for my laptop. I'd suggest ditto yours

  • Notebook speakers

     Hi
     I have hp pavilion dv5-2074dx,windows 7.My laptop speakers are giving me a weird kind of sound when I play music.need help

    Hi,
    Try a Hard Reset as follows and see if this makes any difference.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • DDTS-100 Decoder with Inspire 5500D 5.1 Speakers (DIN Problem!)

    Dear all,
    I bought a DDTS-100 Decoder today, thinking it will improve connectivity and sound quality of my Inspire 5500D 5.1 Speaker System, but I have run into a bit of a problem. My system has a sub which every speaker is connected to and I have to have the DIN cable connected for controlling the speakers and sub but the DDTS-100 doesn't have a din slot so my speakers will not power on when connected to the ddts-100. Is there a way around this or will I have to take back my decoder. I hope there is a solution as I would be very thankful.
    Yours Thankfully,
    Kyle Hunt.

    kyle_hunt85,
    Hitting the tab key perhaps? Gets me every time.
    Daniel

  • Microsoft word notebook layout Saving Problems

    Hi
    I'm having problems with my microsoft word where in notebook layout it won't allow me to save when the ending is docx, which is the usual saving ending. It allows me to save publisher and normal blank word documents, however not the notebook layout. I'm using Snow Leopard and word 2011, have done the updates, and it's the update version of 14.2.3. When i took it to Apple they couldn't help me besides telling me that maybe i have a corrupted file on my laptop and that i should make a new user and transfer my files over. However, if there is a corrupted file then it would just go onto the new user and it also doesn't allow me to prevent it, if the saving problems happen again.
    Has anyone seen this or does anyone know how to fix this problem? Could it be a virus or a corrupted file? And if it's a corrupted file how do i find it to delete it?
    Thanks if anyone could help.

    http://answers.microsoft.com/en-us/mac/forum/macword

  • SB Audigy 2 NX on Windows 7, speakers + headphone problem

    Hi All, I plugged my USB SB Audigy 2NX into a Windows 7 x64 laptop. I have 2.1 Stereo speakers plugged in to the SB 'FRONT' Jack. And sometimes plug a stereo headset into the 'SIDE /PHONES' jack.
    This works fine on my XP system. And when I plugged in the headphones, the sound will just play on the headphones
    THE PROBLEM IS, on the Win 7 laptop, when I plug the headphones into the Audigy 'SIDE /PHONES' jack, the sound still plays thru BOTH the speakers AND the headphones. Does anyone have any idea why this is happening?
    USB Sound Blaster Audigy 2 NX
    Installed Driver: the Creative Sound Blaster Audio Driver .0.0099 (Feb 200), no errors detected on the install.
    Creative Labs I-Trigue 3330 2.1 Speakers

    Ok, thanks. Is the PCMCIA Audigy 2?ZS able to decode from external sources? Or is there a way for the laptop (via software) to decode, effecti'vely only using the NX as a hub to connect to the speakers?Message Edited by Alonso4 on 03-27-200704:54 AM

  • HP Pavilion dv6 Notebook PC sound problem

    hello
    I'm having a problem with my laptop that I'd bought two years ago. My laptop audio wouldn't work without USB headphone. 
    The model is HP Pavilion dv6 Notebook PC
    The product number is XG756UA#ABA
    Thank you

    Hello AustinJeon,
    I see that you are having problems with the sound on your HP computer. I have a couple of suggestions that may help with this issue.
    Here is a link to some troubleshooting steps for common sound issue. Follow the steps in the link and let me know what happens.
    How long have you been having this problem?
    If you use the headphone port does it work or is it just USB?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Pavilion dv6 Notebook PC Battery Problem

    I have an HP Pavilion dv6 Notebook PC Windows Vista 64-bit, I bought it less than 2 months ago.  Yesterday I fogot my charging cable so I ran my battery all the way out.  Then this morning after charging I turned on my laptop and it gave me a message about the internal battery being weak.  I tested it with the HP Support Assistant and got this message: 
    "The battery is functioning correclty, but due to normal aging of the battery, the battery life between charges has reached a point where your battery is no longer useful.  The battery may be covered by your HP Warrant.  Please contact HP."
    What happened to my battery and is there a way to fix it without getting a new one (highly unlikely but I have to ask..)?  I'm hoping this problem is under warrenty because I've only had my laptop for less than two months and the battery is already aged?
    Thanks for your help!

    Hi, try to download the latest HPSA and test the battery again, if it still shows the same problem, contact local support center to get the battery replaced.
    I am an HP employee.

  • HP pavilion g6 notebook hdmi output problems

    So I've had my computer for about 3 years now and the thing that makes this difficult is that the actual laptop screen is broken. This is why I use an hdmi cable and a tv monitor to actually make my computer useable again. Anyways yesterday I was trying to change my computer's screen timeout options and I accidentally changed the monitor display options or connect a projector options and now when I boot up my computer the tv says check signal cable. I know it's not the tv but I don't know what to do please help!
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Start the notebook and wait a few minutes to ensure Windows has loaded, then press f4 once, press the right arrow once and then hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Audigy 2 ZS Notebook MIDI playback problem

    Hi guys, I have a following problem. I recently obtained PCMCIA SB Audigy 2 ZS Notebook. I'm running it on an older DELL Inspiron 5160, Win XP (latest possible service pack and drivers), P4 3.0GHz, 2 Gigs of RAM (max). Onboard audio SigmaTel is disabled.
    I had no problem installing driver from Creative CD, playback and recording works fine. I can even play midi files in Windows Media Player. I knew I had to install drivers from CD in order to be able to use soundfonts, latest drivers do not support that.
    There is the only problem - when I try to use the software keyboard in the Bank Manager, where I loaded up my sf2 banks, it does not make a sound. For writing midi songs, I used to use old MidiSession program. I can't hear anything there either. Strange thing is, when I play any midi file in the Widows Media Player - at the exact same time, both things mentioned above work, keyboard or MidiSession. I have no idea why that is. I tried to uninstall and reinstall Creative drivers and software, nothing. Since I can't update to a newer driver, I'm at loss here.
    I used to have the same setup on my desktop (except the PCMCIA version) and all worked just fine.
    Does anyone has any idea what could be causing this? Thanks.

    ? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

  • Presario CQ56 Notebook PC Fan Problems

    Okay, I've had this Laptop for about 10 Months now, and The Fan's making weird Noises, and it overheats too easy.
    How do I go about fixing this? 

    I would recommend you updating the latest BIOS for your notebook from the support and driver download page on hp.com, and you can also follow the instructions listed in the following document::
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01657439&lc=en&dlc=en&cc=us
    Hope this helps!
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Notebook windows recovery Problem

    Dear,
    I bought HP Envy 15-j102nx TouchSmart Notebook 3 months back which came with Win 8.1 (64 bit).
    Later on i reserved for Win 10, and through the windows app it said that it will be available for download after 29th of July 2015. I checked on 30th of July 2015 no message popped up then i went to Microsoft website and installed " windows 10 download tool and after installation it started downloading Windows 10.
    I just followed the screed instructions which were surprisingly in arabic language (as i am in middle east) after that once windows was installed completely after restart the display language was in Arabic.
    I was unable to do windows update, it was giving an error " code 80072F8F " saying " windows update ran into a problem".
    Also i was unable to open Microsoft App store as it gave same error " core 80072F8F " saying " there is no internet connection.
    Then i wanted to restore win 8.1 from recovery and unfortunately there was no such option. It only gave 1. To do system restore (when clicked it said there is no restore point) 2. Clean window installation to its factory settings.
    I clicked the second option and after factory reset it again installed Windows 10 with same problems.
    Later on i found that my Drive D (partition) which was named as " Recovery" still has data but i fo not know how i can recover the factory reset to original Win 8.1 along with settings came with the laptop.
    Then i bought original win 8.1 pro and installed it on drive C:/ (clean install) everything was removed from it. After installation same problem of " windows update " with same error " 80072F8F".
    I did everything all tries, searched from websites but nothing happened i havent left any single solution.
    At the end i thought i should install HP support assistant as it was deleted with new windows installation. I installed all drivers but two drivers failed to install 1. Braodcam bluetooth driver 2. Intel storage driver.
    Still i cannot run windows update.
    Kindly can you help me out or atleast can i get my factory reset to windows and settings the time i purchased it.
    I will appreciate your kind help.
    Regards

    The drive works because it starts to load windows but stops with the same message as the link above. I'm thinking it's an issue with the drivers on the recovery disks. It may well work with an internal DVD drive but I'm wondering if the recovery disks were never updated for an external USB drive boot up. Thanks anyway.

Maybe you are looking for

  • Currency translation - not picking up currencies from master data

    Hi, We have a currency translation defined for a key figure. We've defined a variable for users to select target currency. 0currency is set to pick up from master data, but the input help on the variable is only showing currencies from infoprovider.

  • How to revoke the  ddl statements in the same user's objects

    anyone pls, I need to restrict ddl on the same user's objects. means, i'm having a user common. my developers are keep on creating tables and alter the existing tables. Even if they are the owner of the objects, can possible to revoke the create and

  • Logon Page Customization Based on URL

    Ramya, You can check the following blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5124. [original link is broken] ~Cheers, Vivek

  • Migrating from Mac G4 733 to imac 24"

    I've just ordered a new Imac 24". What's the best way to migrate my apps,files etc? I do not want to migrate everything i have on my G4...is there any way of choosing what i want to migrate to the new imac 24"? And how do i do it? Thanks in advance!

  • I need to film my iPad screen

    I'm trying to film a demo for an iPad application and was wondering if there's anything out there that will let me film my screen as I go?