Notebook will not start The application wsa unable to start correctly (0x000185)

The application was unable to start corrctly (0x0000185)

Hi
Try F11 option and try performing system restore and check if the unit works fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • "The application was unable to start correctly (0x...

    I have a Dell All-in-One that I had to send in for a new motherboard. While they had it, I had them reformat it. I'm trying to put Skype back on it, but I keep getting this error message after it downloads and when it tries to install: "The application was unable to start correctly (0xc000007b). Click OK to close the application." I'm running Windows 7 Home Premium 64-bit. None of my other programs that I've had to reinstall have caused me a bit of trouble, but Skype will not move past this error message. Any help would be appreciated.
    Solved!
    Go to Solution.

    Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.

  • The application was unable to start correctly (0xc0000142). Click OK to close the application. error: 0x6740090A-0x20003

    Hello,
    I have installed the app-v 5 client on a 2012 rd server. After publishing the application I’m getting the error “The
    application was unable to start correctly (0xc0000142). Click OK to close the application.”
    The registry value
    NtfsDisable8dot3NameCreation is already set on 2.
    The error in the eventlog is
     “could not be started because the App-V Subsystem 'Virtual Filesystem' could not be initialized. {error: 0x6740090A-0x20003}”
    Thanks in advance
    Rene

    See this blog post: http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • The application was unable to start correctly (0xc000007b) in Audition CC. Latest fix? Win7 Prof

    Another username, password later, ..., control handed over to Creative Cloud, install Audition.... then
    "The application was unable to start correctly (0xc000007b)" in Audition CC. So re-installed. I on't want to spend hours trying to get Adobe software to run.  This was my trial application download to see how it worked. ANd it didn't. And there are heaps of posts with complicated advice... ending with - go get a chat support person. And they are not available. aaaaggggghhhhh
    I am now worried that installing any other app from CCloud may cause problems on my PC with other Adobe SW.
    What is the latest (and hopefully simple) way of getting this program to run?
    I don't have ilivid,
    I do have:  CS5, Win 7 Prof, installed via some Adobe CCloud app that I was told to install and use to manage your CC account,
    Grateful for anyone who can wave the magic wand.

    Above linked gave this soln:
    1. please try to download a dll file from  https://drive.google.com/file/d/0B4eWI-NGpmnuTUxPQVIxYThSNlE/edit?usp=sharing
    2. The package contains the files msvcr100.dll and msvcr80.dll. Extract the package contents to the following location:
    I copied the 2 DLL files to the C:\program files\Adobe\audition cc 2014 folder and it worked. SIMPLE !!!!!! YEH.
    Thanks

  • "The Application was unable to start correctly (0xc000007b). Click OK to close the application" error when starting Visual Studio Community

    Hi,
    I just installed Visual Studio and when I launch it, the following error pops up: "The Application was unable to start correctly (0xc000007b). Click OK to close the application". I tried searching online but no usable results. Please help!
    jd

    Hi,
    There is not enough information about the problem. For troubleshooting, I recommend you can use Process Monitor to detect whether there's any process failed.
    You can download Process Monitor and see how to use it for troubleshooting in below links:
    http://support.microsoft.com/kb/939896
    http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
    There are a lot of log entries in Process Monitor, you may filter Visual Studio process only(proces = devenv.exe). And you can upload the logs to OneDrive so that we can investigate them.
    Also, you can refer to Gfazil's post in 
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/96035692-9a50-40d4-a7d3-48bda87d11ec/the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application-when?forum=vssetup
    Please try the method he mentioned to see whether the problem can occur:
    " Replacing the dlls mentioned below from a machine that is working solves the problem:
    c:\Windows\SysWOW64\msvcp100.dll
    c:\Windows\SysWOW64\msvcp100d.dll
    c:\Windows\SysWOW64\msvcr100.dll
    c:\Windows\SysWOW64\msvcr100_clr0400.dll
    c:\Windows\SysWOW64\msvcr100d.dll "
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • "The application was unable to start correctly (0x000007b) with borderlands on bootcamp

    Hi !
    First, excuse my english : I'm french.
    I'm trying to run Borderlands (the first, not the 2) on bootcamp with Windows 7 but when I lunch it, I have a textbox wich says : "The application was unable to start correctly (0x000007b)."
    I have a MacBook Pro 15'' retina early 2014 and I've runed Watch Dogs so I think Borderlands shouldn't be so difficult to run...
    Anyway.
    Can someone help me ? I've been looking for answers for 2 hours now and I still don't have figure it out.

    it's not a bootcamp issue really
    the application was unable to start correctly (0x000007b)
    gives
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/the-appli cation-was-unable-to-start-correctly/16765d09-bc69-4ebb-8471-54b1fa176ba1
    http://www.bitdefender.com/support/how-to-solve-error-message-%22the-application -was-unable-to-start-correctly-(0x000007b)-click-ok-to-close-the-application%22- 1106.html

  • Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

    Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

    Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install.  It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
    http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
    You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer. 
    I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process.  I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software.  I also scanned the downloaded zip with two virus scanners and both said it was clean.  Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
    https://www.youtube.com/watch?v=vlT0N2CX50g

  • Dreamweaver CS6 The application was unable to start correctly (0xc000007b).

    Hi
    I have just done a clean install of Windows 8 64BIT on a new SSD, I then installed Dreamweaver CS6 (trial) but when I try to launch it I keep getting the same error: "The application was unable to start correctly (0xc000007b)".
    I have ran chkdsk and no errors were found.
    Any suggestions.

    The Event Viewer is your friend. That's just a generic crash signature and by itself means not much.
    Working with your Operating System’s Tools
    Mylenium

  • Error Message- 'The application was unable to start correctly (0xc000007b).

    'The application was unable to start correctly (0xc000007b). Click OK to close the application.'
    I receive the error whenever turning on my laptop, and have ever since installing Lightroom4.
    Please help!

    See this Adobe note:
    http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

  • 0xc000007  The application was unable to start correctly (0xc000007b). Get this when run RoboHelp 10

    I get a RoboHTML.exe - Application Error when I try to start RoboHelp 10 HTML.  It says:
    The application was unable to start correctly (0xc000007b).  Click OK to close the application.
    I have uninstalled and re-installed RoboHelp 10 several times but it made no difference.
    What can I do?
    Thanks,
    Diane Heald
    [Email removed]

    Yes it did work fine.  The problem was that I could not view the Single Source JavaHelp output on my PC after I generated it. I know you have to download Java JDK, etc. and I've done that many times over the years and each time it was a huge hassle, but finally got it to work. 
    But RoboHelp worked fine and the output worked fine in my customer's Java program.  Since I could not view the output, a programmer at my client's site looked up the error message online and gave me some links to look at.  I did what one of those links said by downloading something.  I don't remember what at this point.  It was then that I would get the message anytime I tried to run RoboHelp.  So I cannot run RoboHelp now.
    If I can just get rid of this error message and be able to run RoboHelp, I am OK with not even being able to run the JavaHelp viewer.  I've dealt with that many times over the years on various computers and it is always a huge hassle.  I'll just look at it after my customer loads it into their application.
    Thanks so much for any help you can provide!
    Diane

  • Captivate 6 Errors: Missing file libwinpthread-1.dll  and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

    Hi,
    I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
    1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
    Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
    The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
    2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
    Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
    Thanks in advance & kind regards.

    Wow, No replies so far !! 
    Any one ?? 

  • Win7 /Office Updates April 2015 - userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)

    Hi all,
    After updating our acceptence Windows 7 SP1 clients (april updates). We are unable to login the machine.
    Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)
    After rebooting the machine 2times I'm able to login. When I shutdown the machine at the next boot i'm getting the same error again and i'm not able to logon.
    I have no idea where to start. One by one uninstalling updates isn't an option because after a reboot it seems ok.
    Any idea's? Help is welcome.
    The installed updates:
    1. Update (Missing): Update for Microsoft OneDrive for Business (KB2956185) 32-Bit Edition (04e403da-693b-4b76-a7ff-7807aaa8e82b, 200) WUAHandler 15-4-2015 10:35:12 5068 (0x13CC)
    2. Update (Missing): Update for Microsoft Access 2013 (KB2965276) 32-Bit Edition (1292d1c5-e57a-479c-827a-bd91d26995fc, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    3. Update (Missing): Update for Microsoft OneNote 2013 (KB2965264) 32-Bit Edition (161aacb2-973c-4042-8a08-2d7912f46e62, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    4. Update (Missing): Update for Microsoft Outlook 2013 (KB2965270) 32-Bit Edition (216a01f6-8209-42e2-aefc-95cadf8c95ee, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    5. Update (Missing): Update for Skype for Business 2015 (KB2889853) 32-Bit Edition (2510db79-26bb-447c-b2fb-687cb494b0d8, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    6. Update (Missing): Update for Microsoft Project 2013 (KB2965279) 32-Bit Edition (2c49d156-cea9-432f-82c4-3f6b48c8c0ca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    7. Update (Missing): Update for Microsoft Office 2013 (KB2965262) 32-Bit Edition (40fe3b7e-3e2d-4c11-bf5e-3139196057e0, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    8. Update (Missing): Security Update for Microsoft Word 2013 (KB2965224) 32-Bit Edition (59d17ded-907b-4162-8121-f1ce0c47023c, 201) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    9. Update (Missing): Definition Update for Microsoft Office 2013 (KB2965273) 32-Bit Edition (5bd24951-9c92-42d7-a17a-6eaa4a918dca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    10. Update (Missing): Update for Microsoft Office 2013 (KB2965218) 32-Bit Edition (5db38391-2220-412f-83ac-28366ac06dd6, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    11. Update (Missing): Update for Microsoft Office 2013 (KB2965267) 32-Bit Edition (6fb5843a-cb0d-4bcb-9be1-4feb3c740681, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    12. Update (Missing): Update for Microsoft Office 2013 (KB2965255) 32-Bit Edition (91fea44d-b1b2-43a3-a82f-b02e56d3d216, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    13. Update (Missing): Update for Microsoft Office 2013 (KB2965268) 32-Bit Edition (9dd67b4e-59e4-40b0-b5c8-7dcabd770d66, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    14. Update (Missing): Update for Microsoft Office 2013 (KB2825678) 32-Bit Edition (a5bf824c-7e5b-49bf-9d36-145c80221c74, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    15. Update (Missing): Update for Microsoft Outlook Social Connector 2013 (KB2965257) 32-Bit Edition (abab9d22-a65e-444e-8196-fcceba0aa7b3, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    16. Update (Missing): Update for Microsoft Lync 2013 (KB2889923) 32-Bit Edition (c35eb1f8-5ee7-4192-9ad0-1ae72315ac7e, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    17. Update (Missing): Update for Microsoft Excel 2013 (KB2965275) 32-Bit Edition (ca2c6772-706d-4a4a-a68d-78bbeaa3f56c, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    18. Update (Missing): Update for Microsoft Office 2013 (KB2880487) 32-Bit Edition (cf0b67db-b547-489f-a220-4592d68823b2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    19. Update (Missing): Update for Microsoft PowerPoint 2013 (KB2965256) 32-Bit Edition (d1b0c046-1d5b-4f6b-afe7-68a863fb7fe2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046306) (05411874-4d1f-44c4-8aad-dc84726878c9, 202) WUAHandler 15-4-2015 10:15:25 2932 (0x0B74)
    2. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046482) (11ece05f-164c-4a7c-9f02-9379c61e2e23, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    3. Update (Missing): Cumulative Security Update for Internet Explorer 10 for Windows 7 for x64-based Systems (KB3038314) (2be48962-5314-484e-a7e8-16f4679dfea3, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    4. Update (Missing): Update for Windows 7 for x64-based Systems (KB2990214) (45f40ba9-5687-4415-85c7-68198f223f0f, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    5. Update (Missing): Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB3037581) (6c8c0ac4-f40b-4e4b-aa83-1694fe0dbec2, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    6. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045685) (ab4e2d11-37f2-4f64-b7e1-11e5ca25ce2a, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    7. Update (Missing): Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB3037574) (b9d30936-8e3b-4728-988e-78cc39aec684, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    8. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3042553) (cf426941-6ec7-41d2-99ce-710d4ddd543b, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    9. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045999) (e1107158-3e97-4c23-801c-ede494f9df4a, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    10. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046269) (ed46d995-c9fb-41e2-94df-146d97d47d07, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    1. Update (Missing): Windows Malicious Software Removal Tool x64 - April 2015 (KB890830) (1de9e76a-4e0b-4ee3-b2b2-cccd08f4ff59, 200) WUAHandler 15-4-2015 10:12:18 2768 (0x0AD0)

    Hi Tim,
    Uninstalling
    KB3045999 works as a workaround like Wastashi said. We too have this problem.
    @Karen Hu: Startup repair didn't find anything here and this is probably because the system boots properly but only after a user logs in the "Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)"
    appears. Safe mode works however and after I disabled all the startup items and rebooted I could successfully logon once, but this could be coincidence because sometimes after a reboot you can login as pointed out by Tim NL. However a few seconds
    after I successfully logged in and saw the desktop, the pc rebooted spontaneously. Any idea what this could be causing? Virus scanner maybe?

  • Help. Windows 7: The application was unable to start correctly (0xc0150002).

    I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
    I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
    Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
    I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
    Oh, and I've already tried installing and uninstalling it.

    Without system information nobody can say anything. also check the logs in the Event Viewer.
    Mylenium

  • The application was unable to start correctly (0xc00000fd). Click OK to close the application.

    Trying to move Acrobat 7.0 Standard (Version 7.0.9) to a new computer.  found the website to download a new copy of the application.  Downloaded and installed.  When trying to start the application an error message immediately pops up - "The application was unable to start correctly (0xc00000fd). Click OK to close the application."
    How can this be resolved?

    Hi mpatterson54,
    Could you please tell me what OS version are you using on your new computer?
    Regards,
    Anubha

  • The application was unable to start correctly (0x000007b)

    cannot open my download of Lightroom 4.4. getting activation message "The application was unable to start correctly (0x000007b). Click OK to close the application.
    Message title was edited by: Brett N

    http://forums.adobe.com/search.jspa?resultTypes=&dateRange=all&peopleEnabled=true&q=0xc000 007b&containerType=14&container=3316&containerName=Photoshop+Lightroom&username=&rankBy=da te&numResults=15

Maybe you are looking for