Noted Items in customer line item report

Hi Friends,
What is noted items? what is this use ?
i have seen in fbl5n screen ( customer line item report) in type selection.
please give u r reply on this i will assign points to you.
Thahnks
KSR

Hello
Noted items are single line items and basically payments due from the customer/vendors. These transactions  do not affect the balances of the company.
Example of noted items are post dated cheques from customers/vendors.
Hope this helps.
Kavitha

Similar Messages

  • Field Status for Vendor Line item or Customer line item

    Hi
    Can i need to check the Field status for Vendor or Customer Line item when i use the transaction codes F-43 or F-22. This is very urgent.
    Regards

    Hi Vinay,
    You cannot check the Field Status directly when posting a document. The Field Status is controlled by the Field Status group. This is controlled at 3 levels, the company code level, G/L Master level and at the Posting key level. Field status at the posting key level overwrites other groups. It is basically to control which fiedls need to be supressed, which are required and which are optional.
    In FS00 under the create/bank/interest tab you will find the field group. Check the Recon account assigned to your vendor/customer master and check the field status in FS00.
    Regards
    Sridhar

  • Customer line item report with GL account display

    Hi
    Please guide some customer reports for the following
    Client need a Customer Line item reports with Customer number and repective gl account for each line items.
    for ex: Product A/c xxxxxx
              To Sales A/c xxxxxx(recon A/c)
    Thanks in advance

    Hi
    1.FBL5N -  Customer Line item Display (Customer Line item reports with Customer number )
    2.FBL1N - Vendor Line item Display
    3.FBL3N - General Ledger Line item Display
    The sales entry will be
         DR  Customer - to view this entry FBL5N
               CR Sales - to view this entry FBL3N
    Hope this will be usefull

  • Profit centre needs to be updated in Vendor and Customer line item reports

    We are using ECC 6. 
    Profit centre is updating for vendor and customer line items in document level.  But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

    hi
    Use this T codes you will get Profit center wise  S_AC0_52000888 Paybles (vendor balances )
    Tcode for Profit center wise receviables S_AC0_52000887  (customer balances )
    Regards
    Babu.k

  • Business Area wise Vendor & Customer Line item report

    Hi
    We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
    Regards
    Debojyoti

    Hi,
    In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
    Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
    Check once it may help you
    Regards,
    Sankar

  • Profit Center wise Vendor & Customer  Line item report

    Hi
    We are on SAP ECC 6. Can I get Profit Center wise Vendor & Customer  Line item report (as like FBL1N)
    Regards
    Sandeep

    Hi,
    Please Try using "S_ALR_87013343 - Profit Center: Receivables " and "S_ALR_87013344 - Profit Center: Payables"
    Reports
    Best Regards,
    Ravi Reddy

  • Adding fileds to customer line items report  (RFITEMAR)

    Hi all,
             I am modifying a customer line items report<b>(RFITEMAR).</b> I have to add two fields to a structure <b>(rfposxext).</b> I have completed this task. But the problem is how to populate these two fields. I am not able to find the select statements in this report to add these two fields. Any one can help me in this issue.....Thanks in advance

    Hi Kalyan
    In the include "RFITEM_INC",
    Routine "reate_performance_tables" exists where they are assigning "fposxext" to a field-symbol.
    Add you fields after:
            gd_pos_reduced-bukrs = <lfs_pos>-bukrs.
            gd_pos_reduced-belnr = <lfs_pos>-belnr.
            gd_pos_reduced-gjahr = <lfs_pos>-gjahr.
            gd_pos_reduced-buzei = <lfs_pos>-buzei.
            gd_pos_reduced-budat = <lfs_pos>-budat.
    add:
            gd_pos_reduced-xxx = <lfs_pos>-xxx.
    regards,
    Dharitree

  • Grant number in customer line item report

    Is it possible to bring in the grant number in the customer line item report, fbl5n? I tried expanding the fields in the report, but grant does not seem to be one of them.
    Please help!!!
    Thanks,
    MJ

    Hi, check this Add new field in output of FBL1N

  • RE: COPA report and customer line item report not matching

    Hi All,
    COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

    ok

  • Customer line items ...dispute case

    Friends,
    when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
    its kind of urgent please put some light onto it, any help would be highly appreciable...
    Thanks
    Jay

    sounds like changing the ALE from system 1 to the other system.
    However I doubt it will be that easy.
    I believe that could should contact SAP SLO to work out the best route for data migration.

  • Customer line items with balance carry forward no opening balance

    Hello FI Experts,
    We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
    Requirement Here Is:  The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
    Thanks for helping on this issue.

    Hi,
      Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
    Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
    If you are checking in the middle of the year, then the balance will not be carry forwarded.
    Regards,
    B. Radhika.

  • Profit Center population in the Vendor and Customer Line items

    hello
    our client is asking for  getting profit center in the vendor and customer line items  where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
    but our business is not satisfied with the report and expecting report at profit center level.
    Can any one suggest any way of doing this.
    regards,
    Vijay

    Dear Vijay,
    Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
    1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
    2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
    3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
    4. This will help you to do the vendor line item wise selection in the FBL1N,  FBL5N profit center wise.
    Constraints of this solution:
    The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
    This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
    You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
    Regards,
    Bharathi.

  • Runtime error - FBL1N - vendor balance with customer line item

    Hi gurus,
    One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
    when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
    Runtime Errors         PERFORM_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
         not caught in
        procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "RSDBRUNT" is meant to execute an external PERFORM,
        namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
        this routine does not exist.
        This may be due to any of the following reasons:
        1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
        The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
        the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
        2. If the program SAPMSSY1 is involved in the runtime error, one of
        the function modules called via RFC is not flagged as remote-capable.
        (see Transaction SE37  Goto -> Administration -> RFC flag)
        3. There is an inconsistency in the system. The versions of the
        programs "RSDBRUNT" and "RFITEMAP " do not match.
    Warm regards,
    Dhananjay R.

    Hi martin
    still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
    please suggest me.....what to do ?
    Than'x
    Dhananjay R

  • Dummy Profit Center -- Customer Line item

    Hello
    I have a scenerrio on dummy profit center
    1. On Augst 2006 -- A customer invoice has been posted using FB70 and some how the customer account  line item when to dummy profit center and other line items were posted to a the correct profit center.
    2. On August 2006 -- Due to this business reversed original customer invoice using FB08 which again has customer account line item when to dummy profit center and other line items were posted to the correct profit center.
    Origianl Invoice: Customer XYZ Ltd - GL 130024 ( Customer Reconciliation Account)--- Dummy profit Center -- Dr. 235,000 USD
    Reversal          : Customer XYZ Ltd - GL 130024 (Customer Reconciliation Account) -- Dummy profit center -- Cr. 235,000 USD
    This is want we want and this is want we see in our FI entries and all are with the same posting dates.
    Now some how when you look at KE5Z (Profit Center line items report) for dummy profit centers even today.
    1. You see the original customer invoice showing dummy profit center  on the customer account  line item as Dr. 235,000 on GL 130024.
    2. You see the reversal customer invoice showing correct profit center on the other line items and you dont see customer account line item that is GL130024 on this document.
    3. Because of which dummy profit center is showing Dr.balance.
    PCA report:
    Origianl Invoice: Customer XYZ Ltd - GL 130024 ( Customer Reconciliation Account)--- Dummy profit Center -- Dr. 235,000 USD
    Reversal          : Customer XYZ Ltd - No entry except the same document number with the other line items.
    Could you please give us the thoughts except the PCA entry only as business dont have to have this entry. Business basically want to know the reason for not showing the customer line item on the reversal document which will knot out the dummy.
    Will assign good points
    Thanks
    Kumar

    Not answered but closing

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

Maybe you are looking for