Noted items not permitting transaction F-49

Hi Gurus
I am trying to execute  transaction F-49 Customer Noted items
When i am entering  fields  posting key and special GL indicator  it is throwing an error  for eg :
when i take   A  as indicator following error occurs.
"Do not use a special G/L indicator for down payments"
and when i take   F as indicator the following error comes
" Special G/L indicator F is not defined here"   where as  F is defined there
so what i think,  whether a new special GL indicator has to be created with description Noted items and then do a tick in the check box of transaction code OBXR.    but when i try to do that it gives me following error.
" Down payments and noted items not possible for special G/L indicator"      maybe becasue  radio button is selected for Down Payment/Down payment request.
Can somebody help me in this.
Thanks
vishwaas
09821445031

Sorry  Guru
in  F-37  also i am getting the same error.    Can you just go into   OBXR and see the properties of any indicator  F
there in  are  two  boxes
properties                                                                         Special GL transaction types
noted items                                                                        Down payment /down payment request
Rel to Credit limit                                                                Bill of exchange/Bill request
there are two activation done for   noted items and   Down payment/down payment request. 
I think this is were the error lies,   I think the radio button which is selected for  Down payment/down payment request shud be deactivated and only  the check mark for noted item shud be kept.   
but in the screen of  OBXR  the   special GL indicator  types  fields are all greyd out, i am not able to remove the radio button
Please  help

Similar Messages

  • Noted Items -Not Displayed in FSV

    We have posted a Document for Down Payment request and when we are trying to see in FSV/ Noted items we are not able to see the amounts ....

    Hi,
    Noted items by their very nature of being one line item documents are not accounting documents and so do not update GL balances, hence they will not be visible in the GL balance reports.  They can only be viewed in FI line item reports, that too after an explicit selection.
    Kindly go thru the attached link.
    [Noted Item|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/01/a9c6cc455711d182b40000e829fbfe/frameset.htm]
    Cheers

  • Printing a noted item

    Hi, all!
    We have a problem with printing a noted item.
    In transaction FB03 I request correspondence (custom correspondence type ZZZ) for the customer downpayment request (a noted item), and the system creates the request.
    When I try to print the requested correspondence with transaction F.64,
    I receive two error messages
    FB548 "No output of the correspondence" and
    FB556 "Doc. 1000 0800000000 2007 is a noted item; no output", and
    the correspondence is not printed.
    All IMG settings for the correspondence type ZZZ are maintained.
    We use a custom developed print program, which was copied from RFKORD50. However, I received same error messages when I tried to print a customer downpayment request in IDES with a standard RFKORD50.
    Please advise, how could we solve this problem.
    Thank you in advance!

    Hi Vitold Zanevskij ,
    I am getting the same error when trying to print a credit memo using F.64.
    It will be a great help if you can let me know the solution for this problem.
    and how did you solve this.
    Will assign good points.
    Thanks

  • Noted Item posting error

    Hi,
    I want to create a separate noted item as down payment request and assign to separate special GL indicator. but the system is not allowing to create a new noted item for down payment/down payment request, it says "Down payments and noted items not possible for special G/L indicator X". But my requirement is to use a separate request indicator other than "F".
    Please give a solution for this,
    Thanks,
    Regards
    Gayani

    For Down Payment or Down Payment Request noted item standard SGL is F. which you can not modify. Further For Down paymnet noted item you can not use any other indicator other than F. This is standard SAP functionality.
    However for Other you can create new SGL indicator for noted item.
    Regards,
    Akshata.

  • Account type M and G/L account with open item management not permitted

    Hi,
    I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted".  Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07.   Now I am getting this error. 
    Please provide the solutions to overcome this and I want to execute the full transaction.
    Thanks in ADVANCE.
    Kishore

    Hi Kishore,
    Please check these threads
    Account type M and G/L account with open item management not permitted
    Re: Account type M& GL with open item managment not permitted error
    Posting to G/L accounts with open item management are not permitted
    Hope this would help you.
    Good luck
    Narin

  • Item category customizing issue(The item category 'SRTT' is not permitted

    Hi guys:
    I got a material product, the caterory of the product is created by myself.
    I trid to add the product to my service order item, but the error message said ,"
    <b>The item category 'SRTT' is not permitted for product 'BO_3000000018'.
    Message no. CRM_ORDERADM_I507
    Diagnosis
    The item category SRTT is not allowed in Customizing for item category determination of the specified transaction type, or in the item category group of the product BO_3000000018.
    System Response
    The system does not allow the item to be processed further.
    u can display the specified input options. Place the cursor in the document on the field Item category and choose F4 = input options</b>
    I tried many item category but the same error kept jumping out.
    does anybody know the solution? thanks!
    best regards
    Eric

    Hi Eric
    You nay have to set the item category determination properly.
    Fileds are you chould have an entry which should be something like this
    Trans type -
    Item cat group---The item cat that has to appear in your doc.
    for example:
    TA -
    Standard Group-----TAN
    The Item category group field is in the one you have given in your material master.
    Hope this helps you.
    Alicia

  • Account type M& GL with open item managment not permitted error

    Hi
    We are getting the below error message while trying to do Goods reciepting using MIGO transaction.We have created new plants and done all assignments...
    Account type M&GL account with open item management not permitted....

    Hi
    GL code is assigned for GR/IR clearing account..But in fs00,for GL account/Company code,Open item management is ticked..Can u tell me how to remove the open item management.When i untick the open item management it gives an error message as below...
    (you want to switch off the open item management function
    retroactively for an account, you must first clear all the postings
    currently on this account. You cannot make any changes to the account
    management method until this is done.)
    Iam doing config in development server...In production server open item management is unticked

  • Posting to gl a/c with open item management are not permitted.

    hello,
    When i run FAGL_FC_VAL it display the report and generate the batch input session.
    But when i run the session the error massage appear -
                "posting to gl a/c with open item management are not permitted."
    When i post the same gl mannually, it doesn't show any error.
    The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
    Can any body give some idea, what should be done.
    Thanx
    Subodh

    Hello this is chandu,
    When u run the fc val it posts the ex gain or loss to  respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
    So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
    Then assign those a/cs to automatic postings and run the rc val again
    May it will be useful to u
    Thank u

  • Postings to G/L accounts with open item management are not permitted in ASKB

    Hi Gurus,
    I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
    1. The ASKB posts only if the APERB_ITEMS is populated?
    2. If yes, Why the ASKB wants to create postings on this company code?
    3. If no, which are the logic  conditions that include a asset in the ASKB execution?
    4. If the logic is correct, how i can to run the ASKB on OI accounts?
    Thanks in advance,
    Best Regards,
    Emanuele

    Hi ,
    I believe you know why do you run transaction code ASKB if not please see below
    The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
    There are various possible ways of posting APC values:
    To an account set within the original company code
    To an account set of an alternative company code
    To an account set directly in a special ledger
    The account set can be determined from a different depreciation area.
    Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
    During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
    While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000  and if you take your ABAper help to under the coding he will tell you  that is program use APERB_ITEMS to update  and read.
    MANY THANKS
    REGARDS
    Preeti Agarwal

  • Noted items/ Normal Items/ Special G/L Transaction

    Hello all,
    I need again your help.
    In a report are read docs from BSEG table (BSIS, BSAS, BSID, BSAD, BSIK,BSAK).
    The selection screen must have 3 checkboxes for normal-items, noted-items and Special G/L Transactions (something like block type in selection-screen of transaction fbl1n).
    My problem is how to read data from this tables. I mean which field(s) indicate the item type (normal, noted or G/L)?
    There is a field BSTAT, but I think is not covering all the cases.
    Many thanks,
    Bogdan

    Hi,
    For normal-items you can directly select the data from BSIK table where UMSKZ = ' ' means it should be blank
    and for  Special G/L Transactions exactly opposite condition i.e. UMSKZ != ' ' means there should be an indicator value.
    Also for Parked items you have to select the data from VBSEGK table
    Regards,
    Sushil Kadam

  • FBL1N Noted item is not clered

    Hi Experts,
    I am doing following transaction.
    1) F-47 - Request
    2) F-48 - Down Payment
    3) F-54 - Clearing
    But in T code:FBL1N noted item is not cleared ?
    what is the procedure to cleared the noted item in FBL1N
    Or which transaction code i have to ues for cleared the noted item /
    Waiting for reply.
    Regards,
    Girish

    Hi,
    in tcode f-47 for down payment request and and f-48 is post down payment using Request button and select the dowmaymnet request post down payment
    f-54 is transfer the dowpayment to vendor payments after this we have to clear the vendor open items as shown in FBL1N . Clear vendor open items in F-44
    regards,
    Sreehari

  • Idoc-51:Accounting transaction not permitted for posting in FI/CO

    Hi,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02, through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period
    TCODE : Transaction Code
    WAERS : Currency Key
    HWAER : Local Currency
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    Pls guide in fixing this.
    rgds,
    balu

    Hi 
    What is the solution , please let us know ? since we have faced the same error.
    Regards
    Bhavana

  • Accounting transaction not permitted for posting in FI/CO

    Hi,
    For inbound idoc triggering,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02(or FB01), through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type - SA
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period - 05
    TCODE : Transaction Code - FB01
    WAERS : Currency Key
    HWAER : Local Currency
    GLVOR : Business Transaction - RFBU
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    For which fields u've triggered successfully, pls help in resolving the same.
    rgds,
    balu

    Hi,
    i appreciate for your quick reply...
    i've applied the code corrections in the FM FI_IDOC_PREPARE , but still same error coming.
    tnx n rgds,
    balu

  • The (technical) item category 01001 is not permitted Message no. GLT1170

    In the IMG Activity " Classify G/L Accounts for Document Splitting" while assignment of GL Account 3XXXXXX with  Item Category 01001 (Zero Balance Posting (Free Balancing Units) giving Error message :
    The (technical) item category 01001 is not permitted  Message no. GLT1170
    For solution did following Activity
    - Define Define Zero Balance Clearing Account, In this activity i assigned GL Account 3XXXXXX
    -Check following SAP Notes :
    Note 1069228 - GLT2 076 There is no item category assigned to account &1/&2
    Note 1253094 - Document splitting: Incorrect error message GLT2 101
    Note 1137217 - Alternative business transaction variant II
    Note 1087581 - Alternative business transaction variant
    Note 1335743 - FAGL_MIG 093: FAGL_CHECK_DOC_ITEM_CATEGORIES II
    Note 1358696 - Document splitting: Business transaction "SKIP"
    All correction are in place, but still error message is there, Looking for suggestion

    Hi,
    1. In order that document splitting recognizes how the individual document items are to be handled, you need to classify them. You do this by assigning them to an item category. The item category is determined by the account number.
    You need to assign the following accounts in the system
    1. Revenue account
    2. Expense account
    3. Bank account/cash account
    4. Balance sheet account
    The classification of all other accounts is known to the system, so you do not have to enter them here.
    The following item categories are included in the system:
    1. Customer
    2. Vendor
    3. Cash discount offsetting
    4. Asset
    5. Material
    6. Expense
    7. Revenue
    2. In short, Exclude item category 1001, which is technical, in fact you only need to assign the item categories like, B/S Account, Cash Account, Expenses Account or Revenue Account according to you general ledger number range.
    If the GL Account 3xxxxx  is the balance sheet account then simply use the item category 1000.
    In such case, you can ignore the warning message and continue saving. It is appearing because you are changing the numbers
    Thanks,
    Raviteja

  • Opportunity creation: product item category not permitted

    Hi SAP Gurus,
    After some difficulties, we succeeded in transfering products from R/3 to CRM.
    Now we would like to create an opportunity, associated with a customer and a product (in fact consultant services).
    In the 'Products' tab of the opportunity creation, we have to fill the field 'item category'. Whatever we type in it, we have always the same error 'The item category XXXX is not permitted for product YYYY'.
    Do we have any configuration to do or to import from R/3, concerning item category? How could we bypass this error?
    Thanks for your help
    Anne

    First check which item category group your products use. then:
    SPRO->CRM->transactions->basic settings
    Define Item Categories, refered to an opportunity item.
    Then Define Item Category Determination. Add a line with transaction type OPPT and your item category group.
    Anne

Maybe you are looking for