Notes app saves new version with every edit?
This is odd. In the new notes app every time I edit a note (or even while I am creating it...virtually every time I hit return) a new version of the note gets save. Typing a short note gets 15 versions in the sidebar (like the enclosed pic)
Is this how it is supposed to act? Has my syncing gone-wild?
ok, I just found a way to fix it.
For some reason Notes app did nto get along with Gmail. As soon as I went to preferences -> Mail, Contacts & Calendars and removed notes from Gmails (and added it to iCloud) everything started behaving normally.
Go figure...but sounds about right, Apple Mail and Gmail have always had a love/hate relationship, not surprised the configuration difficulty has extended to notes also...
Similar Messages
-
Is there a way to make Aperture NOT create a new version w/ Brush editing?
I have been messing around with the dodge and burn plug in. Is there a way to make it so it doesn't create a new version when I edit with the plug in, but rather just edits the existing file?
nope ... not at this juncture ...
all the current plug-ins work on a rendered .tiff (or .psd) ... -
I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???
That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
Peter -
I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.
Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software. -
Why my app not work in new version, Why my app not work in new version
I just update to new version software ios6.0 for my iPad, but I found that few of my apps downloaded before are not working now, how can I do now?
Lily yu wrote:
Why my app not work in new version
Ummm..I think that's obvious...the developer hasn't updated them to work with iOS 6 -
I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.
I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet. -
Every time I try to download the new version it just says I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred - Try saving to disk first and then opening the file"
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
When using IPhoto for IPad, can I move photos from one album to another? For instance, when I edit a photo in an existing album, the photo is removed and placed in a new album with other edited photos. How do I keep it in or move it back to its original album?
That will depend on the kind of album your photo is in.
Most albums in iPhoto are created automatic by the way you are using and editing your photos, see: http://help.apple.com/iphoto/ipad/1.1/#blnkb9b1e2a
When you edit your photo, the edited copy is added to the automatic "edited" album and the view switches to he edited album. But the photo should stay in its original album - do you see something different? Only if you want the edited photo in the camera roll and the photo strea as well, you have to save the edited copy to the camera roll again after editing, otherwise the camera roll will show the original and not the edted version. -
OK, this is the first time I have used this so I may not have started correctly, so here goes another try. I opened a Numbers Document and noticed the presentation was different from when I worked it before. Since there have been a number of auto updates since I had worked in Numbers, I assumed I had an updated program. I found it hard to figure out so I closed the document and went on to other things. When I went back to it I found a message saying I needed a newer version of the program to open it. Fortunately, the document was backed up and when I opened the backup it came in my familiar form. I have not purchased the new version of Numbers but suspect that is what was using for that brief period yesterday. Anyone know haw that happened?
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
[SOLVED]find command not working correctly new version of findutils...
After upgrading my findutils from 4.2.33-1 to 4.4.0-1, it is not working the way it used to. I downgraded to the old one and it is working fine again. However, I am wondering why the newer version can't do what I want it to...
Typically I run the following script to apply mp3gain to my music collection (albums and individual songs):
#!/bin/bash
echo Albums...
find . -mindepth 3 -iname '*.mp3' -execdir mp3gain -k -a {} +
echo Single tracks...
find . -maxdepth 2 -iname '*.mp3' -exec mp3gain -k -r {} +
On the old version, for the albums, the "find" function works as expected by examining the entire album before applying gain. With the new findutils version, the albums are being analysed song-by-song. I suppose since the new version of findutils, there is just a different method to do what I wanted before with -execdir. Does anyone know how to do it on the new version?
Last edited by tony5429 (2008-07-19 06:29:41)Cool. Thanks for the suggestion. I ended up going with...
#!/bin/bash
echo Albums...
for album in */*
do
cd "$album" > /dev/null 2>&1
if [ $? = 0 ]
then
mp3gain -k -a *.mp3
cd ..
cd ..
fi
done
echo Single tracks...
find . -maxdepth 2 -iname '*.mp3' -exec mp3gain -k -r {} +
exit 0 -
Native Notes app requires two taps to enter edit mode
I use the native notes app a lot. With iOS 3, I would tap on the name of the note to view it, then tap once to enter edit mode (the keyboard appears). Now, with iOS 4, I have to tap on the note twice to enter edit mode. This is very annoying.
It might have something to do with the new feature in iOS4 that recognizes dates. If I tap anywhere in a note that is even remotely close to something it has recognized as a date, I get the “create event” pop-up instead of the keyboard.
Does anyone else experience this? Or is it only me? Unfortunately, I cannot delete notes and reinstall it… Is there a fix for this?
Details: 16GB 3GS, iOS 4.0.1More information:
I noticed that if I create a note on the iPhone, it works fine. I can enter edit mode with one tap. But once I sync that note to Outlook, or if I create a note with Outlook, it takes two taps to enter edit mode.
This did not happen with iOS 3 -
Question
Why can I not use my Norton Toolbar... It is a very important item... If I can not run norton toolbar, then I do not want the new version of firefox.... How do I go back to my old version..Norton has had over 5 months to work in their Firefox extensions, since the API's were locked for 4.0. Ask Norton why they pull this crap every time Mozilla releases a new version of Firefox. When Firefox 3.6 was released mid-January 2010, it took Norton until almost April to come up with a working version of their Firefox extensions.
-
Ingest new version with old version archived - Revisited & solved
I couldn't react to the old thread anymore, but I'd like to share the solution with this forum, because it shows the power of the default functionality in the system.
Start situation: asset is archived, new version comes in, overwrite is set to 'on'.
What happens and could happen afterwards: new version 'takes the place' on the hard drive of the old version, new proxies are created, the archive flag on the asset is still on. A restore would place the old version back on the hard drive erasing the new version. No new proxies are created, so original asset would be old version, proxies are from new version. New version - Original Media is lost.
So this is how I solved it:
I created a subscription - event type = modified - in which the Asset Filter is set to:
Archive Status EQUALS Offline
File Modification Date: the Trigger-if-changed box is ticked.
The response is changing the status of the asset to 'New Version'.
A second subsription - event type = modified - has the Asset Filter set to:
Archive Status EQUALS Offline
(Asset) Status EQUALS 'New Version' with Trigger-if-changed box ticked.
The response is:
1. changing the status to 'Completed'
2. duplicating the file to another device, "Archive_Exchange" (no Asset, no Proxy created)
3. restoring the (old) file from the archive.
A third subscription - event type = modified - is subscribing to a job:
The job filter is:
Title CONTAINS 'Restoring'
Owner EQUALS 'admin'
Status EQUALS 'DONE' - Trigger-if-changed box is ticked
plus definition of FROM and TO devices.
The response is:
Scan the device "Archive_Exchange"; the only metadata which is set here is:
Metadata Set equals 'Media' and status equals 'New Version'. No proxies needed.
Subscription #4 - event type = created - is looking for the newly created asset on 'Archive_Exchange'
So filter is: Metadata Set EQUALS Media, Device (Stored On) EQUALS Archive_Exchange and status EQUALS 'New Version'.
The response is this time exactly the same response as when this new version had come in while the old version was not in the archive. So it's copying the new version in the usual device, overwriting the old version and that's it! To keep the temporary device Archive_Exchange clean, there is also a delete response.
It's a little bit 'Working-around-the-bugs', because why is the system copying the new version to another device, while it knows the Original Media is in the archive, but still, it works and the beauty is: no scripts needed!
Thanks for your input; it made me understand processes better so I could create this monster.There are two basic paradigms that you can use to interact with Final Cut Server files.
One is to let the filesystem be the master. With this, the original files are sitting in the filesystem, and anyone with permissions can mess with them. FCSvr can see changes (via scans) and update itself accordingly. File names must be unique for anything stored in the same directory.
The second method is to let FCSvr be the master. In this, you don't mess with the filesystem--all file interactions are done indirectly like through watchers, uploads, and archiving/restoring. File names must be unique, unless you create the device as a contentbase device type.
Each method can make sense at different times. Generally the second is the safer approach, but the first makes sense like for FCP capture scratch folders and production scans.
If you upload an asset directly to the FCSvr client application, it will provide you with a dialog box to prevent you from overwriting an existing file if there's a name conflict and it's not a contentbase device. (Nick, it will prompt you even if the old file is archived.)
If you choose to overwrite, the original asset will be deleted and any archive device instance will be orphaned. If that's what you're doing, I don't understand your issue since you told it to overwrite.
But if you've mixed paradigms by going behind FCSvr's back (via the Finder or Terminal) to copy a new media file into a place that FCSvr knew was reserved by an archived file and would have prevented had you done it through the client app, then you're asking for trouble.
Your solution options are: use unique names for files, store them in subfolders that are scanned, or store them in contentbase devices. For the first two you can use the project name or number to help make the file names/folder names unique. -
Ingest new version with old version archived
Does anyone knows a solution for this:
My original asset is archived - a new version is ingested - setting is to overwrite the old version.
Final Cut Server is saving the new version on the local storage, leaving the version in the archive untouched. Proxy and thumbnails are created from the new version.
In this situation many functions are greyed out. Actually the system sort of only allows the user to restore the asset from the archive.
Restoring is overwriting the new version with the old version from the archive leaving the proxy and thumbnails as they are.
So now situation is: old version of original file on the local drive, we lost the new version all together, proxy and thumbnails from new version.
This is all very unwanted - any solutions?
Thanks, HenkThere are two basic paradigms that you can use to interact with Final Cut Server files.
One is to let the filesystem be the master. With this, the original files are sitting in the filesystem, and anyone with permissions can mess with them. FCSvr can see changes (via scans) and update itself accordingly. File names must be unique for anything stored in the same directory.
The second method is to let FCSvr be the master. In this, you don't mess with the filesystem--all file interactions are done indirectly like through watchers, uploads, and archiving/restoring. File names must be unique, unless you create the device as a contentbase device type.
Each method can make sense at different times. Generally the second is the safer approach, but the first makes sense like for FCP capture scratch folders and production scans.
If you upload an asset directly to the FCSvr client application, it will provide you with a dialog box to prevent you from overwriting an existing file if there's a name conflict and it's not a contentbase device. (Nick, it will prompt you even if the old file is archived.)
If you choose to overwrite, the original asset will be deleted and any archive device instance will be orphaned. If that's what you're doing, I don't understand your issue since you told it to overwrite.
But if you've mixed paradigms by going behind FCSvr's back (via the Finder or Terminal) to copy a new media file into a place that FCSvr knew was reserved by an archived file and would have prevented had you done it through the client app, then you're asking for trouble.
Your solution options are: use unique names for files, store them in subfolders that are scanned, or store them in contentbase devices. For the first two you can use the project name or number to help make the file names/folder names unique. -
Could not find the main class (with every jar)
This isn't a developer question. I get the error Could not find the main class with every jar I try to open (for example the jar downloaded from https://gjar.dev.java.net/ gives the same problems - and I don't think there is something wrong with that JAR). It isn't a problem with the jar or MANIFEST because the same jar works fine on my laptop. So there is something wrong with my JRE installation, but what?
I tried to remove and reinstall the JRE 6 Update 18 but that didn't work. When I run the JAR with command line java -jar "file.jar" it works fine, but if I dubbelclick on it I get the error message (and it's irritating me).
I'm a bit desperate so I hope that someone here can help me ;)
Thanks in advancedhai T.B.M ... Sorry to post here... I know that i posted my question in wrong thread..but i dont have another solution to contact with you.. I had seen your answers which are really excellent and helped to do my project..
Now i am having very less time to complete my project and i am very new to JMF.. I am not getting output in JMF video capture ..please check the code and guide me where i gone wrong.......please pardon me once again to post here.. Heres my code
import javax.media.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.awt.event.*;
import javax.media.protocol.*;
import java.io.*;
import javax.media.control.StreamWriterControl;
public class webcam implements ActionListener,ControllerListener
boolean eomReached = false;
boolean realized = false;
JFrame f;
BorderLayout bd1;
CaptureDeviceInfo device;
MediaLocator m1;
Player player;
Component videoScreen;
JButton b1,b2;
Processor processor;
DataSource ds=null;
DataSink fileWriter=null;
JLabel status=new JLabel("");
public webcam()
try
JFrame f=new JFrame();
JPanel p =new JPanel();
JPanel p1=new JPanel();
device=CaptureDeviceManager.getDevice("vfw:Microsoft WDM Image Capture (Win32):0");
m1=device.getLocator();
System.out.println("1");
processor.configure();
processor = Manager.createProcessor(m1);
processor.setContentDescriptor(new
FileTypeDescriptor(FileTypeDescriptor.MSVIDEO));
ds=processor.getDataOutput();
player.addControllerListener(this);
MediaLocator dest = new MediaLocator("file://foo.avi");
fileWriter = Manager.createDataSink(ds, dest);
fileWriter.open();
ds.connect();
ds.start();
player=Manager.createPlayer(m1);
player.addControllerListener(this);
blockingRealize();
videoScreen=player.getVisualComponent();
b1=new JButton("START");
b2=new JButton("STOP");
bd1=new BorderLayout();
p.setLayout(bd1);
p1.add(b1);
p1.add(b2);
p.add("South",p1);
p.add("East",videoScreen);
f.getContentPane().add(p);
f.setVisible(true);
f.setSize(500,500);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
b1.addActionListener(this);
b2.addActionListener(this);
catch(Exception e){}
public void actionPerformed(ActionEvent e)
if(e.getSource()==b1)
try{
processor.start();
player.start();
fileWriter.start();
catch(Exception e1){}
if(e.getSource()==b2)
try{
player.stop();
processor.stop();
processor.close();
fileWriter.close();
catch(Exception e2){}
public static void main(String args[])
webcam obj=new webcam();
public synchronized void blockingRealize() {
player.realize();
while (!realized) {
try {
wait();
} catch (java.lang.InterruptedException e) {
status.setText("Interrupted while waiting on realize...exiting.");
System.exit(1);
public synchronized void controllerUpdate (ControllerEvent event) {
System.out.println("myPlayer generated "+event.toString());
if (event instanceof RealizeCompleteEvent) {
realized = true;
notify();
} else if (event instanceof EndOfMediaEvent) {
eomReached = true;
}
Maybe you are looking for
-
ISE 1.2 - MAB Guest and MAB Supplicant Provisioning
In short trying to provide a configuration whereby a Guest utilises MAB and a set of sponsor created credentials to gain access to Internet via the portal. In addition to this I am also trying to provide MAB for "Corporate BYOD" utilising AD credenti
-
AirPlay YouTube from iPhone to AppleTV over LTE w/ No Hotspot
The goal: My goal is to AirPlay Youtube videos from the iPhone 6+ on iOS8.1 to the AppleTV v3 on 7.0.1 over LTE without using the iPhone as a Hotspot. The problem: The problem is that streaming video from internet sources does not function. However,
-
Ipod Nano does not show up in Itunes
Cannot transfer songs to Ipod Nano. Under devices it does not show up in itunes. Also I cannot back up either. The only thing that shows up under devices is Sharing. It is showing up on My computer. How can I fix this.
-
Renaming question in Bridge CS3
When renaming, Bridge automaticaly renames a tif and jpg of the same name, the new name. For example, if a tif and jpg of the same photo are named 1.tif, and 1.jpg, and I batch rename these 2.xxx, both files will be renamed the same 2.xxx. Which is g
-
I preordered the Save Rock and Roll album by Fallout boy from itunes and i cant download it. I received the email and the link on it didnt work.