"Notes" application and getting data off (or onto) the iphone

I would like to use the notes application for a variety of note / list type functions (shopping lists, ideas of things to do and ways to solve problems, etc.), but I ran into a pretty big stumbling block in making good use of it. If I type notes while I'm on the road, how do I copy / sync those notes with my PC? And how do I copy a text file (aka note) from my PC to the iphone so I can refer to it while I'm in the store or on the road. I can't believe they wrote synch software for my contacts and calendar in outlook, and forgot to put in a way to copy basic text notes to and from the iphone. Even my Palm Pilot Pro (circa 1998) did that... what am I missing?

Well, this is not exactly true. Somehow PC remembers your notes so that it puts it back even if you do complete restore of software/firmware which wipes off all you data on iPhone.
Now, if only someone could find where and how this data stored on PC and write some program to edit the PC data....

Similar Messages

Replacing an imac and getting data off the backup drive with different OS

Hello. I have a 2008 imac 27 inch. i backup with a toshiba portable drive. When my machine dies, i may get an android tablet or a windows laptop. If i use a different OS, will i be able to get the data off my imac's backup drive? thanks.

Well, Pictures & photos should be easy enough, Documents depends what kind exactly, calendar I'm not sure what might work.
Other things like Bookmarks will be more work, on Address Book you need to Select All & Export a vCard for them all.

Is there a way to get data off Mac, onto iPhone?

I have my iPhone 5, and I am wondering if there is any way for me to get a document from my MacBook at home, to my iPhone on the road? If not is there a way that I can remotely control my Mac from my iPhone?
Thanks, Kynan

Ok, now I have another question. How do I get the document off icloud and bring it to my iPhone? When I go to the icloud website it gives me three options. Set up icloud on this device (done) and to set up other icloud stuff that I already have done. How do I get the doc from icloud to my iPhone?
Thanks, Kynan

I have an older generation of ipod and cant get music from cds onto it and get music from it onto the computer

plz help!!!!!!!!!!!!!!!

I need more information then. Tell me exactly what you are doing and what happens
http://support.apple.com/kb/ht1386

How do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

how do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!

I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!

See either:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows

I have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser

i have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser

When you connect the iPhone to sync with the new computer, a number of things will happen. If the new computer/iTunes does not contain any music, then yes, you will receive a prompt saying this iPhone is synced to another library, and if you continue, you will lose your music. However, you risk losing a number of other things, such as apps, contacts and calendar data. When you ask about photos, any photos that you have on the iPhone that were synced from the previous computer would also be lost. You need to save the photo folder from the old laptop and transfer that to the new desktop. You also need to sync the contacts and calendar to the same supported application that you were using in the past, such as Outlook, unless you are using an outside web-based sync, such as Google. Also, when you first connect the iPhone, it will make a backup, or at least make sure that it does before you attempt to sync, or you will not have a backup of some of the other things, such as mail settings, SMS, and the contents of the Camera Roll. I would import the photos from the camera roll to the new computer before trying to do anything else in iTunes.

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
       bwkey type werks_d,
       matnr type matnr,
        lgort type LGORT_D,
        budat type budat,
        labst type labst,
       endmenge type p decimals 3,
      end of w_tab.
      DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any .   " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
        record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
       wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
    output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

How to get data off old LC III drive

I have our first LC III computer that I gave to our in-laws...now they want data off of it and I don't know how to get it off easily. The HD is a SCSI interface I think...can I use a SCSI to usb cable? This machine was pre-ethernet, so no communication interface other than the printer port and a port for and old style modem.

Hi,
It is not so easy to gain direct access to data on an old SCSI hard drive via a modern computer.
An alternative could be to use 1.44 MB floppy disks for transfers. Another semi-old (pre-1998) Mac with Ethernet could then read these floppies and forward the data files over a network. A newer Mac would require a USB floppy drive.
A Windows PC, with a floppy drive and a utility such as TransMac for the handling of Mac disks, could also be used.
Yet another solution could be a serial null-modem transfer. See the following discussion for details:
https://discussions.apple.com/thread/4974860?start=0&tstart=
Jan

Getting Data Off Performa 577

Hi everyone -
I've got a circa-1966 Performa 577 that worked a couple years ago when I last powered it up. I just tried powering it up again, and not much happens. Flipping the on/off switch in the back results in a "static electricity discharge" sort of noise from the monitor area, but no other discernible sounds. No lights light up anywhere on the machine.
Is this a sign of a dead power supply? I tried putting in a new PRAM, just to rule that out -- but no change in status.
I've removed the drive (SCSI) and am now wondering how I could go about getting data off the drive (there's not a lot of data; these drives only held 320MB, and I doubt I filled 1/3 of that). I don't have other vintage Macs to drop a SCSI into.
Hints/suggestions are much appreciated!
Thanks!

Still no post.
Version:1.0StartHTML:0000000285EndHTML:0000003986StartFragment:0000002463EndFrag ment:0000003950SourceURL:file://localhost/Users/Admin/Documents/If%20you%20could %20give%20the%20name%20of%20a%20city%20near%20you%20we%20could%20maybe%20find%20 a%20user%20group%20near%20you.txt@font-face { font-family: "Times New Roman";}p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }table.MsoNormalTable { font-size: 10pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }
If you could give the name of a city near you we could maybefind a user group near you. Several people have found local help by connecting up with old timerswho keep spare computers around.
Computer recycling companies will sometimes have oldexternal SCSI optical drives. Pullthe optical drive out and you have a hard drive bay.
As for the computer, have you tried the keyboard powerswitch? It may sound like a dumbquestion but those computers did not come on with the power switch. They turned on with the keyboard, afterthe power was supplied to the motherboard. That is the first noise you are hearing, the CRT respondingto power on.
Ji~m
(not sure what was going on with the text but I had to strip it back to text in Word.)

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

Please clarify rules for the buy iphone and get $200 off ipad

Buy an Iphone and get $200 off an ipad----This offer is posted on the home page of Verizon but I cannot get it to work on my plan even though I have upgrades on 2 lines. It will not let me do it. Could not get through on customer service- cut off after waiting an hour and no local store knew about this offer.

Sweeneys we'll clear up the confusion! The promotion is available when trading in your current iPhone and upgrading to either an iPhone 6 or iPhone 6 Plus. For all the details on our Trade in and Trade Up Promo, please visit http://bit.ly/1i1vrCu
AshleyS_VZW
Follow us on Twitter @VZWSupport

"Notes" application and getting data off (or onto) the iphone

Similar Messages

Maybe you are looking for