Notes are blank in Outlook 2013 after updating the note in IOS 8

The setup:
On my computer, Windows 7 and Outlook 2013 (Exchange 2013 on the server side).
I create a new note and close it. I can open it, modify it, and everything works as expected.
On my iPhone 6 with IOS 8.0.2, I go into the same note. Everything looks fine. If I modify it and close it, I can open it and everything looks fine.
Now the issue...When I go back to Outlook on my PC and open the same note (subject/title shows in the list view), the note is completely blank.
So, I go back to my phone and everything still looks ok. If I type in the now blank note on the PC, it overwrites the old note contents.
To make all this even stranger, if I log into OWA, the note is there and works fine through this entire process (well, until I overwrite the contents). But, in OWA, it seems to strip out the subject on certain saves.
I tried all this on another laptop I have lying around and get the same results. I tried a new profile. I tried safe mode. All the same.
This leads me to believe that Outlook 2013 has issues displaying notes. If OWA has the correct info, then the server has the correct info.
Does anyone else have this issue or can try to replicate the issue? Any suggestions on fixing it?
(Original post
here)

See if you are hitting the issue mentioned in the article -> http://support2.microsoft.com/kb/2980834/en-us?sd=rss&spid=16662&wa=wsignin1.0
If yes, the fix is with Exchange Server 2013 CU6.
============
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • I could not take picture at video mode after updating the software to IOS 7

    I have iPad 3 and update the software to IOS 7 recently,after updating of software I could not take picture in videos mode and I could  take only photos.please advise how to resolve this issue.

    Swipe up or down to select options.
    You can do it in the middle of the screen.

  • Outlook 2007 after updates to iTunes and iOS: Task 'iCloud - Sending' reported error (0X80004005): 'The operation failed.'

    Since updating to the latest iTunes and the latest iOS, I am now unable to send calendar invites, which is what I use to keep my personal calendar, iCloud calendar, Thunderbird calendar, and two different work address calendars in sync.
    I've traced the problem to the inability of Outlook 2007 to send emails after the update.  I get the above error message when I try.
    One thing I noticed is that the location of my iCloud inbox and outbox changed to a location under my Personal Folders as opposed to where it used to be, under iCloud.  I think the issue is with the creation of different *.pst files and their locations, and the settings that Outlook 2007 automatically picked up after the iTunes and iOS updates.
    I'd like to fix this, but am not quite sure how.  I think it has to do with not being able to set the data file I believe to be the proper item as the Default.
    I assume others have also experienced this issue.  If so, has anybody managed to solve it yet?  If you have, please share your solution.
    -- Thanks,
       Mary

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Always use the default account when composing new messages box missing in Outlook 2010 after updating the product key.

    I have 2 accounts in outlook 2010. 1 is for me and the other I have delegate access to. When I am in the delegates email and want to reply it automatically uses the account the email is in. So if I am in my email, the from is me but if I am in the delegates
    email and hit reply the from is them. Now this is not working and I can't figure out how to get it to work. The only thing that changes is that office asked me to activate recently, which is weird since I have had this same computer with the same version of
    office for almost a year now. I did a ton of searching and came across an option on the internet: "Always use the deafult account when composing new messages" but this option is not there on my computer. I checked another computer I have with Office
    2010 also and the option is available so it must be something to do with the office activation because I haven't done it on this computer yet. PLEASE HELP!!!

    Seems this is a hot issue recently, I've post a reply to another thread with the similar topic, please reference that:
    http://social.technet.microsoft.com/Forums/en-US/57289ddd-0dd5-4938-92f7-ee420d8b0d7c/outlook-2010-does-not-reply-to-emails-using-the-same-address-that-received-it?forum=officeitproprevious
    Thanks for your updating.
    Tony Chen
    TechNet Community Support

  • HT5503 My ipad hangs after updating the software to IOS 6.1? Where can I download the IOS 6.1? Send me the link.

    refer to the scrrenshots below. How I can I restore the ipad before using it to the iTunes.
    Note: ipad LCD displays only the cable to iTunes logo. Please help to restore my ipad.

    No Screen shot visible.
    iPad Recovery Mode = http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • After updating the iphone 4s's software it has starting showing 'no sim'.

    After updating the latest software IOS 5.1 for iphone 4s, it has started showing 'no sim'. Not getting any service now? Please help!!

    To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store

  • After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works

    After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works, using iTunes 12.0.1.26.
    It will sync from Outlook to the phone, but not from the phone to Outlook.  This was working last week with the last version of iTunes and ios 8.1.1

    Hello MEOS001,
    If you are not seeing any changes being made over to your iPhone and vice versa to your computer, take a look a the article below. It will walk you through resetting the SyncServices Folder as well the Sync history. It may also be an issue with any plug ins that Outlook may have installed that may be preventing the sync. 
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    http://support.apple.com/en-us/HT203300
    Take care,
    -Norm G. 

  • After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix?

    After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.

    Somebody clearly hasn't read the User Guide.
    Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW. 
    If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation.

  • After updating my software to iOS 6 when I take a photo in an app on my iPhone such as Instagram and camwow when the photos go my camera roll they are black..why?

    After updating my software to iOS 6 when I take a photo in an app on my iPhone such as Instagram and camwow when the photos go my camera roll they are black..why?

    I upgraded an iPhone 4 from IOS 4 to IOS 6 and had similar problems here is what I did.
    Problem:
    Using the Camera App from the initial screen (a view finder for me) there is an icon on the lower left side with my last photo taken.  When I select this icon the image is displayed and on the upper left side of the screen the Camera Roll button appears.
    I select the Camera Roll button and all my images show up as black on a white background.  I can select a black square and my image will apear.
    Using the Instagram App when I try to select from my Camera Roll I see the same black boxes, and Instagram is not saving photos to my Camera Roll.
    Fixing Instagram not saving problem: 
    Go to Settings:Privacy:Photos
    Move the Instagram slider to ON
    Back to the images not showing in the Camera Roll.
    Someone suggested doing a reset (hold down sleep and home button for 10 seconds).  After doing the reset the problem was worse.  From the Camera App selecting the last photo icon from the view finder screen and the Camera Roll screen apears but says there are no saved images.
    Fixing the Camera Roll not showing correctly problem:
    Set Settings:General:Restrictions to ON (You will be prompted to create a password)
    Select Settings:General:Restrictions ON>
    Toggle the Camera slider to ON if it isnt already
    This worked for me. Your milage may vary.  Good luck.

  • TS1967 After 'updating' the newest iTunes version, I cannot sync my iPod Nano!  It does not show up anymore.

    After 'updating' the newest iTunes version, I cannot sync my iPod Nano!  The 'old' version recognized and showed in icon to sync, but the newest version does not.  Is there a way to sync the older iPods?

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • After updating my ipad to iOS 7.0.3 the group pages in my facebook do not open. Can you help

    After updating my ipad to iOS 7.0.3 the group pages in my facebook do not open. Can you help

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • HT4623 after updating the iOS6 my iPhone 4 is not working

    after updating the iOS6 my iPhone 4 is not working

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • I find Mail under Mavericks to be weird. Are others having this same difficulty. "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

    I find Mail under Mavericks to be weird. Are others having this same/similar difficulty? "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

    "Weird" needs further explanation.
    Google's highly nonstandard IMAP implementation is weird, if you're using Gmail, though Apple bent over backwards to accomodate it. Other than that, what do you mean by "weird"?

  • HT1349 after updating the OS today on my iphone 4S I activated  the lock my phone with the password. Now  when I truned on the phone it is locked and can not unlock it with the password.

    after updating the OS on my iphone 4S   i activated the lock my phone  and now I can not unlock it it put the password in but it does not work how can I unlock it?

    Hello son29660,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Best of luck,
    Mario

  • After updating the firmware on IOS7 I can not activate my iphone 4.

    After updating the firmware on IOS7 I can not activate my iphone 4. Itunes says "Unlock the iPhone on this ***** @ *******. ru impossible"

    ITunes says:
    At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
    Unlock iPhone on this I ***** @ ya *****. Ru impossible.

Maybe you are looking for

  • How do I port a number from Sprint?

    I just signed up for Verizon yesterday with an individual line, and need to port my number from Sprint (also an individual line). What number do I need to call?

  • Key not typing letter, but working with Apple key in combination with lette

    I have an Indigo iBook. Just today the "f" key has stopped working - at least for tying the letter itself. When I press it in combination with the Apple key however, I get the "find" box to come up, so in some way the key is working on the keyboard.

  • ITunes constantly restarts

    The last few models of iTunes (including the newest one) will repeatedly restart every time I close it, sometimes up to 15 times before it closes once and for all. It's not a real big problem, but it is certainly an inconvenience to deal with every t

  • How can i restrict display or conceal data for a flexfield

    How can i restrict some property for a flexfied ? begin select responsibility_name into l_responsabilidade from fnd_responsibility_tl where responsibility_id = l_rep_id and language = userenv('LANG'); end; if l_responsabilidade in ('Operator') then  

  • Apex 4 static files names include file path

    Hello, I am using Apex 4 with the latest patch. When I go into Shared Components and upload Static Files or CSS it is including the full file path as the name of the file when it is uploaded. Apex 3 did not do this, it simply used the file name. For