Notes deleted after software update

After I installed the new software all my notes were deleted. The last update was from the status with deleted notes. Any idea how I can get the notes back?

If using the iPhone as designed, contacts are synce to a supported application on the computer or a cloud service like MobileMe or Exchange.
Simply re-sync the contacts.

Similar Messages

Iphone could not activate after software update

iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?

Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier?

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Macbook battery not charging after software update

I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!

Hi imi_uk,
I see you marked this question as "solved" is that the case?
If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility.

HT5654 phone in not activate after software update

phone in not activate after software update

Activation issues are typically the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Scanner samsung scx-4300 does not work after software update v 2.3

hi everybody,
i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
I'm no longer able to scan from my Samsung SCX-4300
on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
is there a way to uninstall the software update?
thanks.

What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
If I delete the following:
- Samsung folder in /Libraries/Printers/
- Samsung Scanner.app in /Library/Image Capture/Devices
Will it remove samsung driver for printer and scanner?
If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

Phone not working after software update!!

i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

Hi and Welcome to the Community!
Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox bookmarks/toolbar deleted after software update for Microsoft

Firefox bookmarks and toolbar were deleted after a software update from my mac computer - an update from Microsoft - affecting word & firefox. The restore function within the bookmark section does not work - it shows the back ups but then states "unable to process the backup file"

You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Safari and Mail will not open after software update

After doing the monthly software update yesterday, my Mail and Safari programs will not open. I click on the icon in the dock or in the Applications folder and I get nothing. The icon in the dock jumps, but nothing opens. I've read several other discussions and tried dragging several files out of the library, such as plist files and history, etc., but they still won't open. The software update only updated iTunes and iPhoto and included the most recent security update. I have not tried to reload Safari. If I do that (and it works), what do I need to do for Mail? Will I lose all my emails? Can someone tell me what I can do to get both programs back working properly? Thanks!

Another approach is to reapply the 10.3.9 combined update. "Repair permissions" via Disk Utility in your Utilities folder.
As far as your e-mail's are concerned, the database files are maintained in your User account>Library>Mail folder. It's very important you backup this folder periodically to external media regardless of circumstances to preclude losing your e-mails in the event of file corruption.
Best maintenance strategy is a full backup of your HD on a bootable external (firewire) hard drive. Makes life a lot easier in the event you need to revert your HD to its state prior to an System Update gone bad.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

Macbook pro (snow leopard) will not boot after software update

I helped my mom buy a Macbook Pro for herself for Christmas. Today, I connected it to her old eMac and used the migration assistant to transfer files over. It was unable to estimate migration time on the only user (after 45 minutes) so I didn't migrate the user. Then I tried to pair her macbook to her new bluetooth keyboard, but no magic happened, so I tried to use the bluetooth setup assistant, which crashed. So I ran a software update, hoping that this would fix whatever the bluetooth problem is. Despite having updated on the 23rd, there were 4 updates. None seemed applicable but I installed them anyway. Now the computer won't boot at all.
Software update said that I had to restart for the updates to take effect, so I restarted. The harddrive went whirrrrrr and the grey screen with the apple logo and the spinning circle displayed. Then the harddrive stopped going whirrrr and 10 minutes later, I started looking on the support site for what to do. I found this:
http://discussions.apple.com/thread.jspa?messageID=10564149&#10564149
Per the instructions in the last post, I fscked the drive (although -f, in accordance with the fsck help). This found no problems. The next suggestion was to boot from the OSX install disk. Only one problem-- there was a disk in the disk drive when the problem occurred and the disk eject button apparently only works while in the gui. I can't install from disk if I can't get the existing disk out of the drive.
So, any other ideas on what I can do to get this machine to boot?
Message was edited by: jenlarkin

Hi Jen:
Since it's new, you're entitled to 90 days of phone support (3 years if you buy AppleCare). It sounds to me like you may have some hardware issue(s) going on - you should not have the sorts of issues you're having with a new Mac. Apple will probably be much better and faster about getting you fixed than this board may be able to if that is the case.

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

17" MacBook Pro will not startup after software update & shutdown

Last night I powered off (shutdown) my MacBook Pro (usually I leave it sleeping). It kindly reminded me I had updates to install. I said OK install them. I didn't check to see what they were, but I believe it was just the camera raw update. I also told it to shutdown after the update.
This morning the computer was off, so far so good.
Press the power button ... nothing. no chime, no diskdrive, blank screen....
Battery level is good, power adapter good with green light.
I have command control power buttoned. reset smu. cannot reset pmu as far as I know as that happens later in the startup procedure? post chime?
I pulled the power and battery and let it sit all day, still nothing.
Any ideas on the sudden failure. The software update seems unrelated, but somewhere in the back of my head I remember hearing about some problem with a camera raw update?
It's a 1st generation 17" MBP. TIA

Just to clarify the symptoms:
Good power adapter, green light on mag-safe when plugged into machine. Good battery(s) have two, both charged.
Press power button and nothing happens, no drive spin up, no noises, no chimes, no screen backlight (even with black screen) etc.
tried control-command power button for 3+ seconds, naughta.
tried pulling power and battery, then hold power for 5 sec. recconect bat and power, naughta.
tried removing all power for 8+ hrs, naughta.
It doesn't seem to be getting power to any components on -power button down -
So, I am guessing here but seems like:
a. Power button/connectors.
B. Firmware issue as last time it was run a software update (unknown) was installed.
C. Logic board?
D. As there is a green light on the power adapter I expect it is not the Left I/O subassembly board?
Are there any other power supply boards that may be involved, or are all of those components on the main board in this machine? Is the power button part of the keyboard assembly?
TIA.

Built in iSight not working after software update!

Last night, I updated front row, quicktime, and iTunes via the software updater. Now nothing is recognizing my built in camera (iChat, photo booth). It says there is no camera connected to the computer. Also, software update isn't working. Does anybody have any idea what could have happened and how to get it running again? Thanks!

NikoM2008 wrote:
Installing the combo update - as you suggested - did not solve the problem. Any other ideas? The iSight is still not being recognized by the system profiler.
Here is what I suggest you do next.
System Profiler is a pre-Lion term. If you are really using OS X 10.7.3, you need to use the "System Information" utility.
After you launch "System Information", click the "USB" item in the "Hardware" item of the System Information window's sidebar. (If the reveal triangles are pointing to the right like ►, click on it so it points down like this ▼ to find the USB item.) Then look under each USB bus item in the "USB Device Tree" for your camera.
If there is no iSight or FaceTime camera listed anywhere in your "USB Device Tree", verify that you used the correct PMU/SMC "reset" procedure for your particular Mac model. If your camera is still not recognized in System Information", yours is most likely a hardware problem that will require a professional fix.
Then contact Apple or an Apple-Authorized Service Provider for service.
Unless you have a current backup, make one before giving your Mac to the repair technician.
Message was edited by: EZ Jim
Mac OSX 10.7.3

Scan to email not working after software update

I got a software update notice on printer yesterday and after that scan to email has stopped working. its EXTERMELY slow to connect and dont work at all.
I spent an hour restarting and resetting router and printer, and nothing has helped.
Please fix the new software update.

Hello Dexter123,
Welcome to the HP Forums.
I see that you are having some issues when attempting to scan to email.
Please click on the following link for instructions on how to Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers.
I suggest that you go through the entire document on the Scan to Email section just in case a setting has been changed.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Notes deleted after software update

Similar Messages

Maybe you are looking for