Notes don't work
Notes in Mail were working until I did a Software Update and now clicking the Notes button or choosing File>New Note don't do anything.
If you are using iCloud, on the iPod touch, tap Settings > iCloud
Switch Notes off then back on.
Similar Messages
-
I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your device with iTunes" and "If you have Never synced your device with iTunes" . Neither has worked and I'm in a vicious circle with each time after lengthy downloads it still all ends with the program, & my phone, asking for my passcode to proceed. I'm not sure if I have ever synced to my mac book (i may have) but my address book seems to automatically update on both devices without the need to plug in. Thank you for any knowledgable help that could efficiently get me out of this passcode ****!
Hi DRussell,
If you have not sync'd your device to your Mac then you will have to force the phone into recovery mode and restore as a new device. Read the information in this link and follow the instructions to recover the phone:
http://support.apple.com/kb/HT1808
Hope this helps!
Cheers,
GB -
My macbook air will not connect to the internet due to a self assigned IP address. I have tried trawling the support forums for hours, but either I can't understand the suggestions, or they don't work. Please explain to me in simplest terms how I can fix this. Many thanks!
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock" !!!!
Ho comprato un adattatore originale Apple "lighitning to 30 pin adapter" per poter usare i mei vecchi cavi dell'iPhone4 con il nuovo iPhone5.
Se collego l'adattatore (con il vecchio cavo delliPhone4) direttamente all'iPhone5 , tutto funziona.
Ma se collego l'adattatore (con il vecchio cavo delliPhone4) all'iPhone5 tramite la "base dock" , l'adattatore non viene riconosciuto e non funziona.
Pensando che l'adattatore fosse rotto, ho riprovato con altri identici adattatori originali, ma il risultatato è lo stesso.
Quindi penso che potrebbe essere un errore di progettazione della base dock che supporta unicamente la connessione diretta tramite un cavo lighning e non supporta la connessione se in mezzo c'è l'adattatore !! -
Links don't work zoomed, issue not solved?
I've been waiting for months on this issue;
when zoomed, zoomed to anything, links don't work in Safari.
I was told months ago, something is wrong with Safari toolkit.
I just updated and issue remains.
(just amazing)
<Edited by Host>HI,
Try maintenance... the link works perfect here; Safari 4.0.5 SL 10.6.2
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting *3rd party plugins or input managers* which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Since you are running Snow Leopard, *make sure Safari is opening in 32-bit mode, not 64.* Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) *make sure Safari is NOT running in Rosetta.*
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
bpageIcons.db to the Trash.*
Carolyn -
the programs that don't work with Firefox 4 are:
AVG Toolbar
HP Detect
HP Smart Web Printing
Incredimail 2.0 will not let me install the JunkFilter Plus, and they say it is not compatible with 4.0This is very serious. Your computer got infected with ransom malware, Cryptowall.
Go here for further info.
CryptoWall 2.0 Anything Good about Buying you Keys? - General Security
CryptoWall and DECRYPT_INSTRUCTION Ransomware Information Guide and FAQ -
Do not Disturb feature don't work.
The moon icon (do not disturb) in status bar disappear when I return to home screen. This feature don't work
I had the same issue. Found it out.
You need to set the device in locked mode with black screen.
Then it works.
If the screen is switched on, the device "thinks" you are doing something and can also take a call.
Try it out. Black sreen for a minute or so. -
Adobe fixes do not work. Can't find a tech phone number.
Robert,
I'm sorry you are having troubles. Did you try both option one and two in this link:
Lightroom doesn't launch or quits automatically after splash screen
If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
Pattie -
Breadcumbs don't work online: '404 - File or directory not found'
Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
My RoboHelp Project has been created as follows:
1. There is a homepage created inside of RoboHelp
2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
Breadcrumb
Link
Home
event:homepage.htm
Home/User Guide
event:../../../User_Guide.htm
Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
Breadcrumb
Link
Home/User Guide/Introduction
event:introduction.htm
Home/Handbook/Sign_Conventions
event:Sign_Conventions.htm
In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
Hoping somebody out there can please assist?
Thanks.Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers! -
Hi, I have a problem wih Photoshop. I am trying to press the buttons but they don't work at all. Also the program are not closed. How can i fix this? FYI, Illustrater is working normally.
You have not provided any useful technical information like system specs, error messages or whatever. We don't even know your exact product version.
Mylenium -
My phone will not turn off, has not done so for ages, Today I tried to upgrade which failed . Now my screen shows only the itunes symbol and a usb lead. When I connect to itunes it informs me the sim card is not supported though it works on other phones. HELP
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes and reinstall but its still the same. Any ideas?
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
My macbook pro 4,1 runs os x 10.6 but won't run my apple usb superdrive. One forum said that this is due to os x, not hardware. The terminal commands given were for Lion, but don't work in snow leopard. Help!
I was able to get it to work!
-
Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real person plz
There are no robots here. Everyone here is a "real person", a user just like you. How about telling us what the problem is that you are experiencing when you try to buy a song? If you mean that you have forgotten your security questions, go to:
https://appleid.apple.com/
Click "Manage My Account", sign in, and go to the Password and Security section. If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, see the user tip created by Kappy, another user here, on how to proceed:
https://discussions.apple.com/docs/DOC-4551
Regards. -
I can't cancel my creative cloud membership.Links and phone number don't work. PLEASE HELP, I WILL NOT PAY THE NEXT INVOICE!!!
This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Maybe you are looking for
-
Custom Report taking more time to complete Normat
Hi All, Custom report(Aging Report) in oracle is taking more time to complete Normal. In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete. We have enabled the trace and checked the trace file,
-
Use lpad function in local variable definition
Hi I want to define a variable with lpad function applied to a data field. For example C_CHECK_NUMBER is the data field. I want to left pad the field with 0's to make it 6 digits long and store it in a variable. Something like this <?variable@inconte
-
Hi, Can anyone point me to any documentation/example on the xml layout for the payload. I am using the plain http send to XI and I need to know how to put the data into the right xml format. Thanks..
-
Can anyone tell how to display the Date in iPad ? I can see only time being displayed currently.
-
Facebook App - Locations/Check Ins
I installed the Facebook app on my iPhone yesterday and through human error, when it loaded I said NOT to use the Check-In. Now I'm trying to use it and I'm getting an error that says "Location Services are disabled. You must enable Location Servic