Notes for e-return filing(j1inqefile)

Hi Every one,
How are you all, Kindly provide me the notes which are required for Ereturn filing J1inqefile we are in Ecc 6.
Take care.
Shradha.

Hi,
Earlier we use to file return annualy,but now its needed quarterly so i require the note

Similar Messages

Acknowledgement numbers for quarterly returns filed

Dear All,
I am trying to pritnt TDS Certiicate, but in the certificate my Acknowledgement numbers are not appearing, I have maintained in table also.
Can you please provide me is there any other settings i need to do for getting Acknowledgement numbers.
I am using 4.6C Version
Regards
Edited by: Sudheer Reddy on Feb 4, 2009 11:49 AM

Dear Sudhher,
There is no facility to enter that same return number in SAP. So create noted entries or assign the same number to set off document number assignment filed.
Best Rgds
Suma

Credit note for Returns

Hello,
I did a credit note for a "returns order".
Does someone know why I get the message:
Document xxx saved (no accounting document generated)
After that I have to press the "green flag" in change billing document or the ReleaseToAccounting within the menu.
Is there a reason for this? Could this credit notes be released to accounting automatically as invoices do?
(customizing?)
Thx a lot !!!

Hello chandu,
thx. for your response.
Your answer is correct, when having a determination problem.
In my case I do nothing else, than save the credit note, then have to do a "ReleaseToAccounting" manually.
Is this a intentional 2-step procedure within SAP?

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Can not see training videos - message "We can't find the page you are looking for, please return to the Apple Support homepage?

Can not open Training Videos shown on Apple Site - message comes us " we can not find the page you are looking for - please return to the main Apple Site"? Help

You've used the wrong name for the folder that holds the html page.
http://web.mac.com/artworksforyouth/iWeb/Site/Home.html
Is what it is trying to find (and it doesn't exist).
www.artworksforyouth.org redirects to www.artworksforyouth.com which then redirects to your iWeb page.
Rather than the word "Site" in your URL you need to use ArtWorks%20for%20Youth

HT201303 you charge me 3.98 for itunes that i did not authoritarion please return it back to my card

You are charging me $3.98 for itunes charges that i did not authorition please return me money to my card, because i have not order anything.

I'm just a guy killing time, browsing the internet while watching MSNBC. I have no access to your iTunes account and did nothing of the sort. Contact the iTunes store at
expresslane.apple.com

Upgrading to CS6 returns: "This serial number is not for a qualifying product"

I have CS5 and have been using it for about 2 years. The Serial number for CS5 it is registered to my adobe id.
So i decided to upgrade to CS6 today. I then registered that to my adobe id as well.
When i open CS6 and enter my new serial number, it tells me:
Serial Number you provided is valid, but a qualifying product could not be found on this computer
Which is strange because CS5 is currently installed and running on this computer
So it then prompts me to select a previous product that I own and enter the serial number for that. So I select CS5 and enter the serial number for my CS5 license.
However, it then tells me: "This serial number is not for a qualifying product. Please try another"
But it doesn't tell may any further details. I.e. Why is it not valid?
Can you help?
Thanks!

Brazzers234 is the serial number for CS5 also an upgrade? The upgrade process is looking for a full version serial number. You can determine what type of serial number is registered under your account at http://www.adobe.com/. For additional details please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you have verified that the CS5 serial number is a full version serial number or your previous full version serial number is still not accepted then please contact our support team directly at Contact Customer Care to verify the validity of the previous version serial number.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

Single docuent for multiple return deliverys for a PO

Dear all
Is there a possibity to combine 2 or 3 GR documents in a single Return delivery MIGO transaction? Currently i have a scenario where-in the vendor deliveries on 3 separate dates( for the same PO) all are rejected and i want to combine the 3 rejections in one return document .
Is it possible
Thanks
Sam

Hi,
It is not possible in Return Delivery - 122 Movement Type, rather you can check the option of creating a Return PO for that particular PO & do MIGO - 161 Movement .
Pl. check
Regards,
Vikas

Freed Goods not appearing in Returns Order

Hi Friends,
We are trying to configure the Free Goods scenario in our system. The free goods have been successfully configured for outbound sales orders. However, in case of returns, when we create a return order, the free good does not appear on the order.
How can we configure the returns orders for free goods.
Regards,
Abhishek

Hi,
Please also check whether you have done item category determinaiton for that Return order..
Retun order type + Item catergory group + Usage + Higher level item category + item category..
And also have a look into free goods record in VBN1 tcode..
Let us know how come your are creating return order without any reference. Please explain the senario..
regards
sankar
Edited by: sankar sankar on Jul 9, 2008 12:54 PM

For Customer return, other adjustemnet or Add. excise required ?

Hi All,
While my customer return the finished goods I am making sales return order ,did the PGR & make the credit note.
Now I want to adjust the excise duty through J1IH
In j1ih which option I have to choose <other adjustemnet> or <Add. excise>
In Add. Excise tab. the Gl account detremine are :
C 0013113920 115.00 CENVAT clearing
D 0024822000 5.00 CENVAT Input SECess
D 0024820000 100.00 CENVAT Input BED
D 0024821000 10.00 CENVAT Input ECess
Whereas In case of Other adjustment tab GL account determine are
C 0024822000 5.00 CENVAT Input SECess
C 0024820000 100.00 CENVAT Input BED
C 0024821000 10.00 CENVAT Input ECess
D 0013113920 115.00 CENVAT clearing
Please suggest me which option is correct.......Other adj or Add excise tab.
In my opinion it should be <Add. Excise> where Clearing account is credited and all rest debited.
Please Give me the solution
Regards
SAGAR

Dear Lakshmipathi,
As directed by you I did & come to know that it's triggering MRDY EX TT if I go through J1Ih < Other Adjustment>.
So now I Created one Sub Transaction Type -
CR - Customer Return.
& in Specify Excise Accounts per Excise Transaction I Maintain
MRDY    CR    Credit     Cenvat Suspence Account
MRDY    CR    Debit      RG 23 BED Account
MRDY    CR    Debit      RG 23 ECS Account
MRDY    CR    Debit      RG 23 At1 Account
& maintained thier GL's.
Checked in
Is this right for Customer Returns????
Regards
SAGAR

Accounting entries for excise invoice for purchase returns in J1IS

Dear Friends
1) I recorded an excise invoice for goods receips in J1IEX . The accounting entry is
Input BED a/c   DR
Input ECS a/c   DR
Input H.css A/c   DR
CENVAT clearing   CR
2) There were some damaged items and same returned to vendor. I did RETURN Delivery in MIGO. The excise invoice in J1IS gives error " BALANCE IN TRANSACTION CURRENCY". Here I used Ref document type - MATD
QUESTION :
What is the Excise transaction type   for ' other outward movement' in J1IS to which I should assign the excise accounts   to reverse    (1) above. Is it OTHR or GPRO.
Thanks
kamala

Dear Mathews,
It is not capital goods. Also if I do a JV in J1IH, the entry goes and is as below :
Cenvat clrg   DR,   Input -BED /E.cess/ S.cess   CR
But J1IS does not save, though I have assigned all said accounts in 'Excise accts per excise transation'   for OTHR. Also I read in wiki that the entry for purchase return excise inv in J1IS is ' CENV CLRG ....DR ,   CENV RECEIVABLE ...CR ' .If so, then do i creat new GL for Cenv Receivable ? What is its effect on FORTNIGHTLY UTILIZATION
thanks for telling
kamala
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM

Sales Order Stock (For Repair Returns) - Valuated & Non-Valuated

Greetings All,
We are currently using sales order stock as quantity only for customer returns for repair (RMA Sales Order). As long as we do not give a credit to our customer, this is working. My problem is that some of our customers are requesting credit... This requires that the inventory now be valuated. I want to keep the link with the sales order (RMA). Is there a way to do this?
Thanks for reading!

Thanks for your quick response Ajay.
I am aware that I can move it to unrestricted stock but I would lose my link to the RMA sales order. Correct?
We currently are not using split valuation.
Any other suggestions?

New Output type for purchase return excise invoice..?

Hi all
For purchase return process with exisable material.
Here I m using the transaction
1.J1IS to create purchase return excise invoice and
2.J1IV for posting to accounts & print purchase return excise invoice
.In standard SAP the output for purchase return excise invoice is JEXC.
here my query is started,
ABAPer created the new program for purchase return output with all new layouts,
And from functional side i have defined new output type for the same as YEXC copying from JEXC.
While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
To proceed further i need some body guidence. Like where to assign the output type.
some body can give some inputs .
Thanks
sap-mm

Hi AP thanks for ur immediate response.
But i have done all the configuratuion in NACE only.
There in nace i m not able find out the mistake or missing configuration.
Can u expalin me step by step process end to end .
Thanks
sap-mm

11g gateway for ODBC returns SYNTAX ERROR on query

Hi,
I have made a database link to an odbc link on a 11g gateway. The odbc driver for the database in question is called connx, a third party driver to connect to RMS files on an old vax. The odbc driver works fine as I tested it independently of the gateway.
The database link connection is fine. I do desc tablename and it returns the correct columns
I do for example select * from SICF090MLT@melt and it returns :
meltdb>select * from SICF090MLT@melt;
select * from SICF090MLT@melt
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
Illegal identifier
A1."CHARGE_NO" , A1."MIX_ID" , A1."BUCKET_ID" , A1."AIM_ST" , A1."SCRAP_MIX_NAME" FROM << Syntax Error >> 'SICF090MLT' A1
ORA-02063: preceding 3 lines from MELT
As you can see all of the columns have been discovered by the query,
I am not sure what can be the issue. Maybe a character translation issue? Some configuration settings for the gateway? Any ideas?
On a side note: all other database links to other databases (sqlserver) work fine with this 11g gateway.
The Best to all of you!

Mireille,
I am using a win32 driver.
HS_FDS_SUPPORT_STATISTICS is false for all my database links. I have had issues with that in the past and have already learned my lesson :)
I will check the quoted identifier setting for my odbc link and change it if I can.
As a side note: for now I am using the DBMS_HS_PASSTHROUGH package to get around the problem, but it is better if I solve my original problem obviously. I will let you know.
Merci et bonne journée.

Notes for e-return filing(j1inqefile)

Similar Messages

Maybe you are looking for