Notes linked to track changes?

We like to use Notes as well as Track Changes in our editing process. Is there a way to link notes to the tracked changes? Specifically, we would like "approved" notes to disappear the way an approved track change disappears.
Thanks

Hi ,
Use the report RPUAUD00(Logged changes in infotype data). This report is to display all documents that were created with the creation of infotype log (short: Change documents). any changes, creation/deletion.
to ensure that changes to infotype fields are entered (changes, creations, deletions), these fields must be maintained in the following views: HR Documents: Infotypes with Documents (V_T585A), HR Documents: Field Group Definition (V_T585B), and HR Documents: Field Group Characteristics (V_T585C).
Hope this hellp you.

Similar Messages

How to not link the track volume with CC7

I need CC11 to do the notes' expression , CC7 to do the phases' volume.
But every time I move the CC7 rate, the track volume (left hand side, the big slide pan) move as CC7.
I used to use sonar, it doesn't have that problem
How to disable the link between CC7 and the volume slide pan?

Hi,
as far as I know, CC7 is reserved for Volume, and as you used it for another function, you did something extraordinary (even with sonar ) Look what tweakheadz says: http://www.tweakheadz.com/midi_controllers.htm *7 Volume (MSB) If you re-route to Controller 7, your software mixer will mess up*
You have several solutions:
1st: Select the MIDI regions in question, go to the event list and filter it by searching for controller No. 7. Now you can easily select them all together and change them (all together) to another value that Logic likes more (and that fits MIDI standards better...)
2nd: Now comes the really advanced way: Build an environment including a transformer for each and every software instrument, cableing the transformer to the software instruments channelstrip input. Now, in the arrange, you have to re-assign the MIDI tracks to the transformer in the environment. It's more complicated than playing chess against Kasparow, but it will open you unknown fields of possibilities (I've tested it and it works for me, but i really don't need this solution for 99,9% of my music). It's a MIDI wasteland for people who as kids loved to play with do-it-yourself electronic kits and weld their cables themselfes... In short: You have to know some thing about signal flow and how MIDI works. Perhaps it is the philosophers stone for you? Who knows.
Anyway, I'd recommend solution No. 1 because it is easy, quick and it works.
Fox

Export docx track changes and comments

Mavericks latest and Pages latest
Export .docx file and the recipient reports that:
comments do not transfer over
tracked changes do not appear in text only as an indication of change box at start of each line
colour assigned to author (green) in Pages has changed to orange when file is opened in Word
Can anyone help with a workaround
I have temporarily tried exporting as a .doc file in the hope that the problems are with a versions of Word rather than with Pages - awaiting a response
Thanks for help

Hi John,
Please come back and check if Stefan's reply was helpful. Please let us know if you need further assistance.
Thanks,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Feature Request: support for Word's Track Changes feature

I love the iPad and Pages lets my wife and I use it to some extent for our jobs. However, the most useful feature for me in a document reader/creator would be the ability to track changes and have it be compatible with Word. I am a college professor, and I use this feature almost daily when grading student papers. If this were available on the iPad version of Pages, I could truly leave the laptop at home.

Why would it need to be compatible with Word? Why not use Pages' Track Changes feature and print the final version, with the comments and markup visible, to PDF? This is what I do. And it works just fine. I get a student once in a while who doesn't have Adobe Reader installed, but I have a FAQ item for that in the online course shell.

Switching: Seeing "track changes" from MS Word

I know Pages does not have a track changes function as in MS Word. I also know of the comments function in Pages, which I prefer anyway.
But when you use Pages, can you see text marked with track changes in a Word document?
A friend of mine put in an effort to help me edit something I have written. I use Pages, he uses Word, so I exported my doc to Word and sent to him. He edited it using track changes and sent it back to me (still as a Word doc). Problem is, in Pages I can't see what changes he has made, or comments inserted in Word.
Is there something I can do to make Pages display what you would see if you were using Word?
I don't want to use any Microsoft products...

Thanks. That is exactly the situation, I can see the new text but no way to see what it used to be, or even that a change has been made. So it is real hard work to go through and check for places where changes might have been made. If I could at least get a mark in the margin to identify a site where something has changed it would help a lot, but I have found no way to do that in Pages.
I have OpenOffice, but I just find that Pages is a lot nicer and I don't want to start using that just for this. Anyway I can't figure out how to get OpenOffice to show where changes have been made either. Can't see using a multitude of different programs for text editing...
The best I have come up with is to get my friend to send me his MSWord file as a .pdf, so I can at least see where the changes are and make them myself in my original Pages document.
But I would rather there was a way to get Pages to do what I need...

Copy text from word without track changes

Version: Word 14.0.6129.5000 32 bit
OS: Win 7
Hi -
We receive tons of word-documents to our newspaper, and many of these are copied and pasted into incopy. Some of the editors also use track changes in word heavily.
The ordinary ctrl+a ctrl+c ctrl-v copies track-changes-info. (This also apply if we copy to notepad etc.)
Is there an easy way to copy just the text without all the track chages-info, just the final text?
This is a big problem for us, and I haven't found a quick and easy solution on the web.
Regards -
Johannes
(Sorry for bad english)

Hi Hans,
I just retested this Copy/Paste of Tracked Changes and Comments under Word 2011 for the Mac and Word 2010 for the PC. The results vary.
Regarding the PC with 2010 version.
Regardless of the Show Tracking settings in the Source document, the tracked changes DO NOT transfer from the source Word document to the destination Word document.
Regardless of the Show Tracking setting in the Source document, comments ALWAYS carry over into the destination Word document.
In all cases, source document tracked changes ALWAYS transfer to Note documents.
Paste Unformatted DOES NOT eliminate the tracked changes and comments when pasting to a Word destination document
Regarding Word 2011 on the Mac
Regardless of the Show Tracking settings in the source document, the tracked changes DO NOT transfer from the source Word document to the destination Word document.
Regardless of the Show Tracking setting in the Source document, comments ALWAYS carry over to the destination Word document.
In all cases, source document tracked changes DO NOT transfer to Text (txt) documents.
Paste Unformatted ALWAYS eliminates the tracked changes and comments when pasted into the destination Word document.
On both versions the default settings for Smart Copy/Paste and Cut, Copy, Paste we in effect. All test files where xml formats. (docx)
Kind Regards, Rich ... http://greatcirclelearning.com

Pages io7 in track change mode: hangs?

Hello,
Using the latest version of Pages io7, I encounter regular freezes: in track change mode, whenever I select a word, the normal selection feature appears (the word gets blue) and the app hangs/freezes for a few seconds before being able to do anything: type a letter, delete the selection or widen the selection.
Thanks for help!
Pierre

I have this problem too and not just when tracking changes. Pretty much any time selecting words and trying to modify the selection is incredibly slow. Fully exiting and restarting the application sometimes seems to help, but really that's not a fix. Have tried all Apple technical help suggestions, including reset and removing/reinstalling pages. Only thing left is completely wiping the iPad and starting from scratch, and I don't have time to do that at the moment (I use the iPad for work.)

Linking text to track changes

Hello all, my end goal is to be able to track changes to variable text that gets added to a text frame that has particular tags in it. For example the text frame may have this:
Save <text1>
Reg price <text2>
I then susbtitute in <text1> and <text2> with variable text but would like to maintain a link to those individually to see if anything has changed. I do not care if the words "Save" or "Reg price" change and I can't use those words to know where my variables are because they may not always be there. Another example could just have variable text, in which I would want to keep track of the changes individually like this:
<text1>
<text2>
<text3>
Any ideas?
Thanks!

The text itself is tagged. I am retrieving the text from a database and replacing the corresponding <text1> with the text from the database. I then want to be able to update the database with just changes that occurr to the database text that got added. It is very simple when the textframe just holds one <text1> with no static text, because in that instance I just take whatever is in the textframe and update the database when the editing in indesign is complete. However, I would like to add the capability of having more than one <text*> label and also be able to have static text.
For example:
Database looks like this:
text1 = "1.99"
text2 = "2.99"
textFrame looks like this:
Save <text1>
Reg price <text2>
After replacing the text:
Save 1.99
Reg price 2.99
Then lets say I edit the second price and text:
Save 1.99
Regular price 4.00
I then want to update the database to say
text1 = "1.99"
text2 = "4.00"
I hope thats more clear!

Custom change document is not tracking changes for SAP tables

Hi gurus,
I have created a custom change document for tables EKBE and KONV. But the change document is not tracking changes in BDCP table for changes in EKBE or KONV.
Please help me out.........

HI,
Use this link for change pointers concept.
change pointers
let me know if u have any issue.
~linganna

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

HT3176 my apple remote will not link to my appletv even after changing the battery

my apple remote will not link to my appletv even after changing the battery. can anyone help?

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Pages "Track Changes" does not work when working in cells in a document

While attempting to edit a WORD file (converted to Pages for my macbook) it was discovered that the Track Changes feature will not register if the changes are inside a "cell" in the file. The RFP I am trying to respond to is made up of multiple columns and rows. Anytime you make a change inside the columns or rows the "Track Changes" does not record the change. Outside of the columns/rows it works perfectly.
I download the most recent OS and Pages file last week. The issue started then.
Has anyone had this issue before?

Yes.

OK so i need to reset my security questions because i do not remember them,but the link that is given for my email is incorrect. i do not know how to change that?

OK so i need to reset my security questions because i do not remember them,but the link that is given for my email is incorrect. i do not know how to change that?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103340)

HT6084 Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes), as every time upon opening such a word file the word processor closes / crashes. What can be done in this ca

Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes or comments in the doc). Every time upon opening such a word file with tr.changes the word processor closes / crashes.
What can be done in this case?

I just discovered that by turning off in tracked changes balloons in Word preferences prevents the software from crashing, but from then on I need to use only the review pane.

Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

Notes linked to track changes?

Similar Messages

Maybe you are looking for