Notes on CRM Middleware and other

I am after some notes on CRM. Please can someone kindly send me the notes on CRM Middleware (CRM500) and CRM Services (CRM700) and any other similar notes.
My email is [email protected]
Thanks in advance,
Ruong

Hi Amit,
I appreciate if you could send me CRM middleware document to me as well @ [email protected]
thanks,
Amit

Similar Messages

  • My webcam is not working for skype and other appli...

    Hello,
    My webcam is not working for skype and other applications i have used tinychat and tango..i have updated all version of skype as you said in other topics but all of them is not working for me...my device name is vimicro usb 2.0 and i have accidently deleted that device now i have installed that device again but its not working i have seen all topics please help me  ...
    i will be very thankful to you

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

    I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
    I remember that with Snow Leopard you could download them from the Apple website.
    Cheers!

    Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

  • Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

    Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

    Hi, MPiaM.  
    Thank you for visiting Apple Support Communities.  
    I would need clarification on if you are experiencing an issue with syncing photos via iTunes or iCloud to provide a better answer.  However, here are a couple troubleshooting articles that cover both scenarios.    
    iTunes: Unable to sync photos
    http://support.apple.com/en-us/TS3697
    Get help using My Photo Stream
    http://support.apple.com/en-us/HT203511
    -Jason H.  

  • MacAir does not synchronize outbound (iPhone and other MacBook) but it does it inbound

    MacAir does not synchronize outbound (iPhone and other MacBook) but it does it OK inbound

    Using Windows? Read here:
    http://support.apple.com/kb/TS1538
    Follow the directions to the letter.

  • Regarding CRM middleware and XI

    In SAP CRM middleware acts as a heart of CRM.
    that means communications with CRM server from any other server is through middleware,right?
    In netweaver ,XI acts also the same like the integration server.
    right?(both SAP and NON SAP server)
    please explain the above two statements clearly.
    thanks in advance
    kpsmoorthy.

    The role of CRM "middleware" vs XI is often misunderstood.
    Let's go back many many years and understand why we have CRM "middleware".
    Before XI even existed SAP had to have a way to transfer data between an R/3 system and the CRM system.  The CRM system needed to have a "replica" of the necessary master data to capture sales orders for e-commerce or mobile sales.  Thus SAP created the "middleware".  The middleware consist of a new dimension "plugin" on the R/3 system and code on the CRM system, built upon the concept of queued RFC.  Basically the standard transactions such as XK01, XD01, VA01, etc. were modified to generate bdoc's whenever data was changed or created.  These changes then flowed to CRM via queued RFC.
    CRM middleware primary goal was to receive data from R/3 and to send data back to ERP.  In release 3.0/3.1 it was expanded to allow external systems to receive and transfer data into CRM via the XIF adapter.  After the XIF adapter was released, SAP introduced the XI system. The XI system was designed for integration between systems.  However the CRM middleware being robust and not requiring extra systems still exists.  If you want to integrate one SAP CRM system with an SAP ERP system then the "crm middleware" is the application tool that is isued.
    If you need to integrate SAP CRM with external systems then you would use a combination of XI + the CRM XIF adapter.  In CRM 52/60 you can use the web services toolset in addition to the XIF adapter.
    To summarize:
    "CRM Middleware" - Specialized integration scenario between SAP CRM & SAP ERP
    XI - your integration server that can do a lot more than "crm middleware".
    Take care,
    Stephen

  • USE OF  CRM  MIDDLEWARE AND  XI in SRM LANDSCAPE

    Hello All,
       Please Can anyone tell me for communicating between SRM and different systems within a landscape,how  do we recognise whether to opt for  XI or  CRM  middleware
    (Of SRM)???
    Please Help.
    Thanks,
    Disha.

    Hy Disha,
    The different communication methods from SRM are:
    1 CRM Middleware
    This is only used for Master Data replication (init) with SAP Backends, and for Product master for init and delta uploads.
    You can define your own BDocs for your needs (non easy way)
    2 RFC
    This is used for R/3 backend document creation (Reservation, PR and PO) in classic and extended scenarios, and for several checks in the SC creation
    3 ALE/IDOCs
    This is used for Good receipt and Invoice creation in R/3 in Classic and Extended scenario
    4 XI
    It is used for SUS integration, CCM upload and publishing scenarios, and PO send scenarios.
    Regards.
    Vadim

  • SAP CRM middleware and replication and mapping

    Hi CRM gurus,
    how r u, this is sivakumar, i want some details of how the process regarding, replication  in the middleware and mapping  from R/3 to CRM theory part, if u hav please send me
    Regard
    siva

    Hi Natarajan,
    Can you please send me CRM middleware documentation to [email protected]
    thanks in advance
    Cheers,
    Reddy.

  • Not getting Facebook Notifications and other issues

    Okay. I have been dealing with this since last night and I don't know what else to do. I have not been receiving any push notification from Facebook. I thought it was an issue with the device so I power cycled the device and when I tried to access the Facebook app, it asked me to sign in. As I proceeded to enter my log in information, I get an Error Code 2602 and was not able to log in until I uninstalled the app and then reinstalled it. What is going on? I have seen THOUSANDS of feedback posts in teh App World about this and it has not been addressed. It is things like this that make companies like Instagram not build apps for the Baclkberry platform. PLEASE FIX THIS IMMEDIATELY!!!!!

    My guess would be that Facebook and/or RIM has done something and jacked up all Blackberry users. Hopefully they will get their act together and fix it... Android phones are looking better and better to me at this point, and I am considering not waiting the year and just buying one out right.

  • Mucho strangeness: passwords not propagating to AD, and other annoyances

    Hi all,
    I'm dealing with a few problems in IDM at the moment, and am looking at a small grab-bag of symptoms, which may or may not be linked to each other or to the problem at all.
    The main current problem is that passwords aren't propagating into our Active Directory servers, although they did in the past.
    First a quick summary of our environment, we are running IDM 5.5, we have a central mysql DB which is the source of user infromation, 3 different tables, one for each class of user. Activesync is in use to watch these tables, and we have a custom user form for each table too.
    We are feeding account data into an LDAP server, which is working fine, and to a pair of Active Directory Servers, one for testing/development, and one intended to be for production, except the 'production' server isn't actually in production yet.
    Password information is held in the mysql tables, in 2 different forms, 1) pre-encrypted unix hashes, and pgp-encrypted plaintext, we use the pgp-encrypted plaintext to feed the AD servers, and the unix-hashes for the LDAP.
    Amongst other things the custom forms are calling locally written java code to reverse the pgp-encryption.
    Because the AD boxes weren't in production, we don't know when things broke, or what may have changed to cause the breakage.
    The symptoms I've found are as follows:
    - account creation on AD works, including the initial password,
    - password changes are not going through to the AD servers,
    - changes to other fields in the mysql tables, do propagate (ie, changes to names, email adresses, vacation settings),
    - Our custom user form gets run 3 times, on any change to an account within the mysql tables,
    - The first time the form is run, the waveset.accountId is, sometimes, null, (maybe this is on account creation?)
    - The first time the form is run, activeSync.pgp_pass (our pgp encrypted plaintext password) is always null,
    - on an attempted password change, the task log doesn't show that it is trying to change the password, only that the Acocunt was 'updated',
    - on changing any other field, the task log shows that it was changing that field, although it does show other fields that may have been changed,
    - the catalina.out (we run tomcat), does show that the passwords are being correctly decrypted from the pgp form,
    I'm stuck at this point, can anyone make any suggestions?

    Hi Again,
    This reply is just to let people know what happened with the issues I listed above.
    - The user form being run 3 times, I don't fully understand this one, but I did reduce the amount of work the form did by turning the pgp decryption from a Expansion, to a Derivation field type.
    - the empty attributes, the first time the form is run, does appear to be due to the first appearance of a user account, ie waveset.accountId is empty because it hadn't been generated yet for this user,
    The basic problem of the passwords not puching out was a naming issue, when we first developed the software to decrypt the passwords, we put it in global.pass, and in the schema maps, placed entries like pass->userPasswordAt that point the system worked, then we decided to be more explicit and decided to name the attribute password instead.
    Which meant the schema map was now working with the password. namespace and the password.password attribute, which in turn meant the password distribution failed, because we didn't set password.confirmPassword, or the pasword.selectAll attributes.
    We were lazy, and didn't expect what looked like a attribute name change to be able to change anything, so we didn't notice the passwords stopped propagating.
    As you can see from the above we are still learning how this all works :-(

  • Qosmio x770/00x - button 1 does not work pressing 6 and other button

    This is going to sound so weird, but bear with me...
    I just got a Qosmio x770/00x a couple of weeks ago, mostly for gaming purposes.
    I play in left-handed configuration, using the Num pad as directional keys, with some of the other non-directional numbers mapped to things like 'jump' and 'melee', etc.
    I have the '1/End' key mapped usually to the 'Crouch' motion in games, and noticed that if I press the '6/Right' key, in combination with any other number key, the '1/End' key won't register!
    This means if I'm moving Forwards in a game, and Strafe to the right, I can't simultaneously crouch.
    I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
    However it seems that it *has* to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
    Have also tried this on the store demo model at the local computer place, and it seems that it's a problem with this particular model.
    The store computer runs Windows 7 Home Premium.
    I'm running Win7 Pro. BIOS and Windows are fully updated.
    Have also tried it on my older P-series Satellite, and that doesn't have the same problem.
    Any ideas?

    Hi
    >I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
    >However it seems that it has to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
    Ive got 2 notebooks from two different manufactures and the button 1 does not register if 6 + other button is pressed.
    Dont think its a really a keyboard bug because this happen with my two notebooks which are not really similar to each other

  • Help with new Airport Extreme (and network name) not recognizing Time Capsule and other Airports in the home

    I had a Time Capsule running in an AV Cabinet and it made too much noise as it backed up and ruined soft/quiet music passages (and created far too much warmth as well).  So, I visited the local Apple store and the guy I met worked through a few solutions with me.  I decided on an Airport Extreme for the audio cabinet, and would move the Time Capsule to another room where it would not create noise interference.
    So, I have the Airport up and running perfectly well.  I changed my wireless network name and password.
    I cannot get the Airport Express and Time Capsule to show up on my network.  They both just blink that brown/orange color on the front.  When I go to the Airport Utility, it does not pick up the Time Capsule or Airport Express.  I have tried unplugging and plugging back in and scanning for devices, but dont know what else to do.  Are they still looking for my old network?  Is there a way to reset them??
    Thanks for any help.

    I've tried the option key on both--the AEBS offers 14 options, including Automatic, while the TC offers 8 options, and no Automatic. The AEBS lists (among others) 802.11 a/n-b/g compatible, 802.11 a-b/g compatible, or 802.11 n (5 GHz)-b/g compatible. The TC offers 802.11.n (b/g compatible), 802.11n only (2.4 GHz), and 802.11n only (5 GHz), among others...
    I had already followed the instructions in the link you supplied, except that the wireless options don't quite match...
    I am currently trying 802.11n (5GHz)-b/g compatible on the AEBS and 802.11 (5GHz) on the TC, which gives me a rate of 270 on my n devices and 54 on my g devices, according to the Airport Utility.
    This might be the best I can do, without buying a new TC. Thanks for any advice you can give...
    C.

  • On Demand sub report not printing in IE and Other Browsers

    Hi All,
    We have developed Crystal report for our web application with version 13.0 and Visual Studio 2010.
    When we run our web app in IIS report display fine in All web browser and when we print report in ActiveX mode in IE 9+ for main report it prints fine but if we print on demand sub report it not printing even a single page out of 2 or more than 2 page.
    If on demand sub report has only one page then it will print in IE 9+  browser.
    Even If we click on Export button on demand sub report easily export to pdf or any formate the issue while we print it.
    It going to hanged while we print on demand sub report with more than one page.
    Please help in this issue.
    Also  please let me know if you want more detail.

    Not sure why you created two Discussions on the same issue? (CR on demand sub report goes hang in IE)
    Locking this Discussion.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • How to distribute the serial core only with my exe and DLL applicatio​n using the Labview applicatio​n builder 8.21. I'm not interested having MAX and other components installed on the customer PC and in the program menu

    Since Labview ver 8.0 and later, I am not very happy with the new way the project installer is managing the additional drivers such as Serial.
    With LV 7.11 the serial components was included in the cab file and was installed on the target computer in a specific directory. The size of the distribution was pretty small and well suited for compact distribution.
    My LV application use only the serial object and with LV 8.21, if I include the serial 3.2 component, I get an enormus file including max, visa ... and a lot of fucky component I do not need.
    To distribute my application, I just need, the runtime engine and the serial driver as it was with the version 7.XX
    Looking for clever advises from you gentlemen!

    Thanks Dennis for you input
    My problem is in fact very simple. 3 years ago, I developped a software suite for X ray generator; My company is selling such generator all over the world and our control panel software and DLL (for OEM integrator) is based on Labview professionnal development plateform.
    To drive our generator, we just need to transfer ascii data using the strandard RS232 port still present on most of equipments used in the industrial area.
    Until LV version 7.11, there was no problem to include serial component in my distribution with a very reasonable size and transparency for the end user.
    with LV 8.xx (preparing a new release), I'm very disapointed to see, my distribution is increased of about for 10 Mo to 180 Mo just because I increase the serial component.
    May I mix a previous version of the serial component with LV 8.21?
    Should I change my source to Visa instruction only and merge visa runtime only to my distribution?
    is there any simple serial example based on visa and distributed with th application builder?
    I will appreciate your help in order to optimize my distribution
    Pascal 

  • Safari will not open home page and other glitches since upgrade

    Strange stuff happening since I did the Combo Upgrade 10.4.11. Safari will not open to my home page. I have used preferences to set the home page but closing Safari and restarting still opens a blank page with no URL in the address box. I also noticed that several pages I have opened that have log in fields don't allow tabbing to the next field. I have checked all the preferences and every thing seems right. I have trashed Safari and its preference folder, downloaded the upgrade and used Pacifist to reinstall Safari. I used Disk Utility to repair permissions. Still I can't can't get a home page to load. Before the reinstall, I synched with .Mac to save my bookmarks and synched again afterwards to bring them into the fresh install of Safari. What should I do now?

    Here is a culmination of my searching and efforts that fixed this issue for me. I find it necessary to run Disk Utility more frequently.
    1) Trash Safari preferences in all user accounts:
    Computer/Library/Preferences/com.apple.Safari.plist
    User/Library/Preferences/com.apple.Safari.plist
    2) Empty trash
    3) Move files from Input manager to desktop
    /Users/YourUsername/Library/InputManagers/
    /Library/InputManagers/
    4) Restart computer
    5) Close Safari if automatically opens on restart
    6) Open disk utility: Applications/Utilities/Disk Utility
    7) Verify permissions
    8) Repair permissions
    9) Reopen Safari
    10) Return Input Manager files from Step 3, ONE FILE AT A TIME from Desktop to Input Manager Folder and Restart between moves.

Maybe you are looking for