Notes program on iMac and iPad thats syncs and saves locally?

Hi all,
I have just started using my iPad and of course I like it a lot
But- where can I find a good program for making notes that I can use both on my iMac and my iPad that saves the notes locally and syncs between the Mac and the iPad? I use MobileMe so that´s an option if the app can use it.
I have tried Evernote, but as far as I understand I can´t reach my notes being off-line on the iPad. My iMac is always on-line, though.
Any suggestions, anyone?
/Kjell

First, check out EverNote again - you can create note sets and designate one set to be stored on the device rather than just available via the Internet. This might be your solution. Once EverNote become available for the iPad I stopped looking at note programs but there's one called SimpleNote - it doesn't sync to a local computer but it does sync to an Internet account which you can access via web on your computer and sync the edits back to your iPad.

Similar Messages

  • Best operating system with which ipad 3 and ipad 2 sync and work better.

    I have leopard 10.5.8. I need to know, if i bought ipad3 , which operating system will be best for troublefree sync and work.
    Is there any security reasons related to leopard to ipad3 as slow speed , error in file transfer etc.
    Please also recommend for ipad2. My choice is to go for snow but not lion as it requires magic trackpad and ram upgrade etc.
    If lion is best then i can go for it.

    You can run the latest version of iTunes with Leopard 10.5.8 and that's all that should really matter to be honest. If you want to upgrade to Snow Leopard it's never a bad idea and it's pretty cheap on Amazon.
    Extras like Wi-Fi Sync and iCloud are completely optional and may be convenient but not extremely critical in the long run unless you like those conveniences and they suit your needs.

  • Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

    Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

    Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
    If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

  • How can I delete apps in iTunes and have that sync to my iPhone and iPad?

    How can I delete apps in iTunes and have that sync to my iPhone and iPad? I don't want to delete 3 separate times for each item. I just carefully chose 30-35 apps to get rid of via iTunes, hoping it would sync to my devices, only to find I have to repeat the process on my iPad, take notes, then repeat it on my iPhone. It wasn't always so tedious was it?
    Here's the "Help" I got from Apple. They even quoted my question back to me then proceeded to answer with something very different and completely missing the point.
    I understand that you would like to delete the Apps. I know how eager you are to get the required information and I will be happy to assist you.
    You can remove individual songs, audiobooks, and videos from your iPod, iPhone, or iPad. Removing an item from your device doesn't delete it from your iTunes library.
    To remove items from a device other than an iPod shuffle, first make sure that iTunes is set up to manually manage items.
    1. Connect your iPod, iPhone, or iPad to your computer.
    2. When the iPod, iPhone, or iPad icon appears in iTunes, select it.
    3. Unless your device is an iPod shuffle, click the Summary tab and make sure "Manually manage music and videos" or "Manually manage music" is selected.
    4. If the disclosure triangle to the left of your iPod, iPhone, or iPad (below Devices) is closed, click the triangle so that you can see the device's contents.
    5. Select the item you want to delete and press the Delete key.
    This was not helpful in any way and I am still unable to delete apps on my devices in a global, iTunes based way. Each device still requires its own independent process.

    Match was off.  I made all of the changes and then went through the "Turn on iTunes Match" option.  I now have deleted some tracks, edited the Metadata in CDDA, and then added it back.  This worked fine, but it is not a good solution.
    I just tried making some edits and use the "Update iTunes Match" and that seemed to work.  It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes.  However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes. 
    Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

  • On my iPad, my outgoing email regularly replies that the email was rejected by the server because it does not allow relaying.  WHat does that mean and how do I make the email go anyway?

    on my iPad, my outgoing mail regularly replies that the email was rejected by the server because it does not allow relaying. What does that mean and how can I make the emails go out?

    Try this.
    Check your username and password in the outgoing mail server setting. Fill it in even of it says that it's optional.
    Settings>Mail, Contacts, Calendars>choose the email account>account name, tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email username and password and see if that works for you.

  • Since installing mavericks, my computer calendar does not sync with my iPhone and iPad calendars.  My iPhone and iPad are synced however.  What can I do to make all of my mac devices sync

    Since installing mavericks, my computer calendar does not sync with my iPhone and iPad calendars.  My iPhone and iPad are synced however.  What can I do to make all of my mac devices sync

    You don't sync the MM calendar anymore, you subscribe to it in iCal,
    iCal>Preferences>Accounts, enter the details here.
    MM should be the default calendar on all clients.

  • I followed Winston Chruchel's instructions to sync notes between iPhone and iPad. iPhone syncs to iPad but iPad doesn't synch to iPhone"

    I followed Winston Chruchel's instructions to sync notes between iPhone and iPad. iPhone syncs to iPad but iPad doesn't synch to iPhone"

    I would ask these guys.
    https://games.gree-support.net/forums
    I was unable to find anything in their FAQs, so submitting support ticket may be best.

  • I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    Do you mean that you did a soft-reset ?
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    dedonred wrote:
    "iPod cannot update because it contains files that are used by another application.
    It means that nano was used on a third-party software or synced from different computer to sync music. Does that nano show in iTunes? If yes, then restore completely. If not, then you may need to head to Apple Store and see what they can do.

  • We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads.  The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized.  Tried everything.  Help!

    We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads.  The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized.  I've tried updating the software, reinstalling iTunes, using different ports on the laptop, different cables...just about everything.  I have NEVER been able to connect this one device, but all the others are fine.  I'm at my wits end.  Is there someone out there who can help a relative novice figure out what's going on?  Thanks so much!

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • The ipad wont sync and will return an error "Ipad cannot sync because the computer is no longer authorized to transfer the purchases..." But when I do a file devices transfer purchases.

    The ipad wont sync and will return an error "Ipad cannot sync because the computer is no longer authorized to transfer the purchases..." But when I do a file>devices>transfer purchases. It is successful. Updated to ios7 recently. I'm facing the problem since then. I've tried deauthorizing and then authorizing several times.

    Thanks Gail but ive tried that as well as logging oht and back into my accounts on my iphone and mac but I still get that message. I actually found a solution by unckecking my synced music playlist and clicking sync to remove it and then reclicked on my playlist to sync and it actually synced notmally and I got all of my new songs so I wanted to test it again so I clicked on sync again and the message once again popped up until I did the un-syncing and re-syncing again. I guess I will keep doing that in the future even though its annoying but its better than resetting my iphone.

  • Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

    Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

    Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
    Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
    I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
    Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

  • I am trying to sort my bookmarks A/Z. I go to organize book marks and click that command and it puts everything A/z but when I go back to my normal page and click bookmarks it is not A/Z. One I organize it how do I save it that way?

    I am trying to sort my bookmarks A/Z. I go to organize book marks and click that command and it puts everything A/z but when I go back to my normal page and click bookmarks it is not A/Z. One I organize it how do I save it that way?

    Sorting Bookmarks in the Library window (Bookmarks > Organize Bookmarks) is for temporary display. The Bookmarks are not permanently sorted.
    To permanently sort, open the Bookmarks Sidebar (Ctrl+B opens or closes the Bookmarks Sidebar ---- Cmd+B in OSX), right-click (Cmd+click in OSX) the "Bookmarks Menu" folder and choose "Sort by Name".
    See: [[Sorting Bookmarks]] '''''~~red:and~~''''' http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    For automatic sorting of Bookmarks see the add-on SortPlaces:
    Add-on: https://addons.mozilla.org/en-US/firefox/addon/9275
    More info about SortPlaces: http://www.andyhalford.com/sortplaces/index.html

  • HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

    First, we're not Apple here (Apple does not participate in this forum).  We're only users like you.
    The previous owner has not given you the correct ID and password for you to use.
    If the iphone has iOS version 7, then read through the following...
    http://support.apple.com/kb/HT5818

Maybe you are looking for

  • Downloaded camera Raw 8.7 and photoshop CS5 still won't run it

    I'm going to cry if CS5 keeps stuffing me around...Can't update programs for any of the CS5 suite won't explain why, just bought a nikon D750 and had to download camera raw 8.7 and photoshop still won't recognise it, so far I have uninstalled and rei

  • Assets linked to Custom Objects

    Hi All, I'm trying to find a way to represent the link between a Custom Object and an Asset. I know I can create an Asset under a Custom Object as a related record, but if I look at the details for that Asset, there is no field I can locate that will

  • Print results the script in landscape mode

    Hi folks, how I can in powershell print off the results ofthe following code in landscape mode: $result | Where {!$_.Values} | Foreach {Start-Process -FilePath "s:\INVOICES\0070\$($_.Invoices).pdf" –Verb Print}

  • Upload hierarchy using flatfile

    Hi, I need to upload the HR hierarchy from PeopleSoft. PeopleSoft delivers the hierarchy as a flatfile, but not in the BW structure. The file is delivered as follows: Level1              Level2             Level3             Level4              Level

  • How to set timeout during call oci api

    hi all : in my program i use OCIInitialize and OCIEnvInit to connect oracle 10g ,but sometime the db does not return ,whether ok or error , at the same time i use sqlplus to connect db ,it is the same . so i want to set timeout in my program , does o