Notes, To do and EQ

Hi anyone know how i write notes on the ipod and writing "To do" on calender? and what is EQ? someone
please help me

Hudgie, "How do I get my Contacts and Calendars onto m", 01:52am Feb 2, 2005 CDT
About the iPod EQ
Storing and reading notes with your iPod

Similar Messages

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

HT4098 How do I unsubscribe from subscription VIP in the game StarMaker? every week, I removed 66 rubles, while I'm there not even sit, and how do I unsubscribe don't know, please help

How do I unsubscribe from subscription VIP in the game StarMaker? every week, I removed 66 rubles, while I'm there not even sit, and how do I unsubscribe don't know, please help

Contact the maker of the app. Apple has nothing to do with subscriptions to third party apps.

Oracle BPEL - Does not cater for not null columns and use of "default".

Oracle BPEL - Does not cater for not null columns and use of "default".
BPEL fails with message:
ORA-01400: cannot insert NULL into ("EDDB"."SEISMIC_LINES"."COORD_SYSTEM_ID")
But SQL*PLUS command works:
INSERT into EDDB.SEISMIC_LINES
(etc)
regards
Allan Ford
Analyst / Programmer - IT Application Services, IT Services, Shared Business Services
Santos Ltd
Level 4, 91 King William Street, Adelaide SA 5000
Phone: 08 8224 7944 Fax: 08 8218 5320
Email: [email protected]

note: BPEL keeps it's own "offline" copy of table and database items. A column that is marked not null in the database can be marked as nullable in this area. (if you kmow that a trigger is going to cater for this ..)
One workaround is to use a trigger to provide value rather than use the column default ..

What's the difference between a not-initialed object and a null object

hi guys, i wanna know the difference between a not-initialed object and a null object.
for eg.
Car c1;
Car c2 = null;after the 2 lines , 2 Car obj-referance have been created, but no Car obj.
1.so c2 is not refering to any object, so where do we put the null?in the heap?
2.as no c2 is not refering to any object, what's the difference between c2 and c1?
3.and where we store the difference-information?in the heap?

For local variables you can't have "Car c1;" the compiler will complain.That's not true. It will only complain if you try to use it without initializing it.
You can have (never used, so compiler doesn't care):
public void doSomething()
   Car c1;
   System.out.println("Hello");
}or you can have (definitely initialized, so doesn't have to be initialized where declared):
public void doSomething(boolean goldClubMember)
   Car c1;
   if (goldClubMember)
       c1 = new Car("Lexus");
   else
       c1 = new Car("Kia");
   System.out.println("You can rent a " + c1.getMake());
}

Hp smart web printing does not work on firefox. HP says this is not their problem and to contact Mozilla. Is there a plug in available?

I just bought a new hp printer. the software has a feature called HP web smart printing. The feature works on explorer but not on Firefox. HP says this is not their problem and suggested I contact Mozilla. Is an add on available and if not will one be made available.
I am using v. 3.6.13. and the printer is HP Officejet 4500.

HP smart web printing is an application that only works with IE. In spite of what HP have told you, if they want their application to work with Firefox they will need to make a version for Firefox. It is not down to Mozilla to make a version of the HP software for Firefox.

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

HT1386 I have a new iPhone and want to purchase a ringtone on iTunes. It keeps asking for answers to a question that I did not set up and don't have the answer for. How do I get pass this dilemma?

I have a new iphone and want to purchase ringtones from itunes. Itunes is asking answers for security questions I did not set up and I can't answer them. How do I get past this to be able to purchase. I can purchase songs on my MAC and sync but itunes doesn't give the option to purchase ringtones on the MAC, just the iphone.

If the email hasn't arrived after a few hours and isn't in a spam filter, you need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106007)

HT5622 I am the owner of my iPhone 4 and it had not been updating and allowing me to download apps. So I decided to do factory setting, before doing so I had backed up my phone on my computer then I had erased everything from my iphone. But now I want to

I am the owner of my iPhone 4 and it had not been updating and allowing me to download apps. So I decided to do factory setting, before doing so I had backed up my phone on my computer then I had erased everything from my iphone. But now I want to start everything from the beginning, and on my setting my Apple ID is present however when I put my password in it doesn't let me log in. The message that I receive says that I would have to remove my Apple ID as it will not let me log in with that I'd even though I am the original owner, I have tried everything on find my iPhone as well, even there my Apple ID not showing on the devise.
If anyone has had a similar experience could you please advise me on what to do,
Thanks

You must have the credentials that were used to turn on Find my iPhone on the device. Without them, you can not get past the activation lock.

My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks

There is a backup plan after doing the Restore. Read this.

Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from Wigton

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

When i sign into icloud it says my apple id is okay but i do not have icloud and it will not prompt me to set it up

when i sign into icloud it says my apple id is okay but i do not have icloud and it will not prompt me to set it up

You can't setup an iCloud account using a PC. You need a Mac, or an IOS device. You can sign into iCloud on your PC once you open an account.

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

I was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

Quit the messages app and reset your phone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
After the phone restarts go into Messages and delete the thread containing the problem message.

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Notes, To do and EQ

Similar Messages

Maybe you are looking for