Notes won't stop emailing me!

Hi. I've been using Notes lately, and it keeps emailing me my notes as I'm writing them. In fact, it just sent me five emails of the same note.
I'm not clicking the share button at the bottom so I don't know why it's sending me the emails. Is there some setting that I have on accidentally?
I know that it syncs with the Notes application in ICloud, so I don't understand why it's sending me the emails.
Also, it wasn't sendinge me the emails before.
Thanks

Well, I'm sorry to hear that you had a crummy experience with this transaction. Sometimes, if you let a seller know ahead of time that you are unhappy with your item, they might make amends, but it is completely within your right as a buyer to expect to get the item you bought the first time around so..... Assuming the messages are coming via ebay messages and not your personal email, you'll have to sit down at a desktop or open a web browser on your phone and log into your account. Go to your Messages. On each one, there should be a section at the bottom that looks like what I have attached below. Go to the Report an inappropriate email and follow the instructions. Do this for EVERY message that you've been sent by this person. I don't know what good it ever does but this is what you can do. Report them. For each message sent. When a seller makes a Feedback Revision request, they are warned by ebay NOT to harass the buyer to do comply. The seller really should know better than to do this to you.  I too have a problem with unwarranted and unwanted messages from a fellow ebay member (not a customer) who has been reported by me to ebay multiple times and long-ago blocked but still has somehow managed to circumvent it to continue to contact me. In the most recent message, he suggested I have marital relations with a pig. He also told me he has run out of his meds. I don't reply to something like that. I would suggest you not either with this seller. Eventually, someone else will leave bad feedback for this seller and you'll be off the hook. Good luck as you carry forward.   

Similar Messages

  • I left a negative feedback, and now the seller won't stop emailing me.

    I bought an item on eaby, and it was completely different from the picture, and honesty, just terrible.  I'm not someone who jumps to leave a negative review, and this is the first time I've ever, ever done it.  I left a negative because I think it's wrong to misrepresent a product. Ever since leaving the feedback, the seller has contacted me every day, sometimes twice, telling me to change my review. I'm not changing it.  I left an honest review. The end.  I want no further contact with this seller.  How do I make them stop emailing me?

    Well, I'm sorry to hear that you had a crummy experience with this transaction. Sometimes, if you let a seller know ahead of time that you are unhappy with your item, they might make amends, but it is completely within your right as a buyer to expect to get the item you bought the first time around so..... Assuming the messages are coming via ebay messages and not your personal email, you'll have to sit down at a desktop or open a web browser on your phone and log into your account. Go to your Messages. On each one, there should be a section at the bottom that looks like what I have attached below. Go to the Report an inappropriate email and follow the instructions. Do this for EVERY message that you've been sent by this person. I don't know what good it ever does but this is what you can do. Report them. For each message sent. When a seller makes a Feedback Revision request, they are warned by ebay NOT to harass the buyer to do comply. The seller really should know better than to do this to you.  I too have a problem with unwarranted and unwanted messages from a fellow ebay member (not a customer) who has been reported by me to ebay multiple times and long-ago blocked but still has somehow managed to circumvent it to continue to contact me. In the most recent message, he suggested I have marital relations with a pig. He also told me he has run out of his meds. I don't reply to something like that. I would suggest you not either with this seller. Eventually, someone else will leave bad feedback for this seller and you'll be off the hook. Good luck as you carry forward.   

  • My iPhone 4S won't load email messages from my local carrier. It works sometimes and then won't.  The local carrier says it is not them and to contact apple.  Been happening since got Kindle Fire. Could this be doing it?

    My iphone  4S  won't load email messages from my local carrier on a regular basis.  It says cannot get mail in use on another device.  I thought everything was to sync together?  Local carrier tells me it is Apple not them.  It's been happening since I got my Kindle Fire about a month ago.  Any ideas how to make everything work together?????  Does it when kindle is off to sometimes.  Thanks.

    Hi Maquillage,
    Thanks for using Apple Support Communities.  I would recommend troubleshooting the iPhone by following the instructions in this article:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Cheers,
    - Ari

  • I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

    I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

    Hello dwb,
    Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
    Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
    Thank you again for your advice,
    Regard,
    Beauty of Bath

  • I was changing my desktop screen saver in system preferences screen protection.  Now it says it is "Loading Images" and won't stop.  The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

    I was changing my desktop screen saver in system preferences>screen protection.  Now it says it is "Loading Images" and won't stop.  The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

    Welcome to the Apple Support Communities
    I have seen a lot of cases like your issue, and it's easy to solve.
    First, open Disk Utility, select Macintosh HD in the sidebar and repair permissions. Sometimes, a permission can be damaged and it makes that an application doesn't work properly.
    If that doesn't work, open Finder, select Go menu > Go to Folder, type ~/Library/Prefereces, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist" and restart

  • Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

    My HP Laserjet 6P won't stop printing.  It prints a few lines of symbols and characters at the top of each page.  The printer is not connected to a network or computer.  I tried shutting the printer off for a long time.   This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
    Any suggestions for resetting, etc.?   I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

    Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HT201656 Email is unusable as it keeps trying to load emails and won't stop. What can I do?

    Email is unusable as it keeps trying to load emails and won't stop. What can I do?

    Try closing the mail app completely and reboot your iPad. Assuming that you are running iOS 7 .....
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Mail app and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPad won't send emails but iPhone does. iPad message says server does not recognise email address resetting account makes no difference what else can I try?,

    My iPad won't send emails despite identical settings with iPhone which does work. " server does not recognise email address" resetting account fails to solve issue. What else can I try?

    Have you checked ALL the settings including the port assignments? Easiest way to get those back to is to delete the email account from the iPad then redo the email account. Usually the ISP providing the email account will have instructions on their web site.

  • Stop sending me emails I do not need 100 clogging my email I have change my info to stop email notification 3times

    Stop sending me emails Ido not need 100 emails a day clogging up me email. I hav change me message to stop receivinge mails and I am still getting them.  STOP STOP

    You are NOT talking to Apple here and remember that every time that you post again and someone responds to try to help you, the emails will continue to pour in from those people that are trying to help.
    Read these instructions from another discussion and make sure that you are doing everything exactly as stated below.
    Anyway first click on your name to get to your homepage/profile. At the top there are three tabs one of which is Notifications, that's number one,. Next look at the right side of the page at the box Actions in there click Manage Email Notifications. Finally click  Edit Preferences in the action box and click on Email Notification Preferences.
    And make sure that you click on Stop Email notifications in the Actions Box in the upper right corner of this page.
    Here is the discussion that I copied the instructions from.
    https://discussions.apple.com/thread/3343849

  • My macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas?

    my macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas? It's really worrying me because I haven't had it for up tp 2months and last week everytime I switch it on it makes sooo much noise. And I treat like an egg so I don't understand whats going on.

    Hey,
    My friend had a very similar issue to yours. The issue came down to the pins of the MagSafe not meeting with the MacBook perfectly causing the lights and the transfer of power to be wacko. I'm not sure if this is issue that your experiencing, but its worth checking out the pins and the MagSafe area on your MacBook for debris.
    Troubleshooting Magsafe power adapters with stuck pins
    If that is all clear, then I would suggest you call AppleCare or take it in to an Apple Store to have it checked out.
    Tom

  • LED won't stop flashing, even when there are no new notifications

    The LED on my BlackBerry won't stop flashing, and I can't work out why. I have no new emails, messages, Facebook notifications, Twitter mentions, appointments/calendar events, and the LED didn't flash for new articles in the TIME magazine app any way. None of the other apps have anything to notify me of either.
    I updated the OS some time ago, so I can't see that being the cause for the problem, which means I can not work out why the LED is still flashing, unless my BlackBerry is broken.
    Has anybody else had this problem?
    Running OS v4.6.1.310 (Platform 4.2.0.127)
    Solved!
    Go to Solution.

    Hi danphynes,
    Are you still experiencing this issue? If so, what color is the LED? Can you verify that the LED coverage indicator is disabled in Options -> Screen/Keyboard? Is the LED flashing red continually or does it stop for periods of time?
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Spotlight & Mail Search Not Working After Deleting email Account's '.OfflineCache' File.  How Do I Get Back to Normal?

    Running OSX 10.7.4 and Mail.5.2.
    One of 3 email accounts was constantly trying, but unable to synch.  The rotating splines were turning non-stop but not synching (other two email accounts worked just fine.)  After doing some searching on the internet, I found several articles about this.  Many included the symptom of the "Recovered Messages" constantly being recovered/generated.  I had noticed that I would get some recovered messages on occaision, but had never noticed it to be problematic.  These articles suggested that the ".OfflineCache" file for that email account had been corrupted or the root of my problem.  So, I deleted the .OfflineCach file as per this article...
    Fix OSX Mail Creating Multiple 'Recovered Message
    Well that got my mail working again.  However, I soon noticed that spotlight no longer works and when I try to search mail, it doesn't work.  It will only return a complete email address/contact; it doesn't search the contents of the email.
    I tried to get spotlight to re-index the hard drive.  However, when I try to drag a folder or volume to it, I get the error:
    Since spotlight and mail search have always worked flawlessly for 5 years, I'm confident this is related to having deleted " .OffflineCache" for that particular email account.  However, it seems strange that mail search won't work for the other email accounts.
    Any other tips for getting spotlight back online?
    How about the .OfflineCache file.  Will Mail restore it, replace it on it's own?
    Any help would be greatly appreciated.
    Also, looking back, not long before this problem started, I was trying to send a single email with numerous pictures ( around 50 or so.)  I forgot to select "medium" for the picture size and it started trying to upload them at full size.  I realized this after a minute or two and cancelled the upload, changed to 'medium' and sent the email with no problem.  I point this out because the "Multiple Recovered Messages" error seems to be related to or being induced by having an excessively large file in the particular mail account's .Offline.Cache file.

    Well, a couple days later and it seems that the .offlinecache has been rebuilt.  Finder, Spotlight, & Mail search all seem to be working normally now! 

  • IPad won't stop checking mail

    iPad won't stop checking for mail - it has been over an hour and still checking.  Also my primary email does not pick up all my mail.

    Thanks so much for your reply!
    I should have also mentioned that I've deleted the account, did a reset, and even a restore (at apple's suggestion) and nothing has helped.  I just finished reentering all the account info after the restore and it still has the "checking for mail wheel spinning". I have 15 iPads in this office and haven't had an issue with any of them expect this one.
    It also has the "Load More Messages..." 29 messages total, 0 unread - at the bottom of the inbox, but it won't let me select it or "load" any more messages.  It does send and receive emails just fine though.  Slow, but fine.
    Any other thoughts?!

  • Mail - Won't stop recovering messages!

    A couple days ago, I was trying to email some .zip files (they were photos that I put in a .zip) to my friend. However, they were too big so it didn't send. So I ended up just not emailing them at all and quit out of Mail.
    Now, whenever I open Mail, there's a new folder called "ON MY MAC" and under it is "Recovered Messages." The messages under the "Recovered Messages" folder is all the emails that I tried to send to my friend a few days ago. I tried deleting these messages from the folder, but they keep coming back! Mail keeps recovering these messages, but I don't need them anymore. I just want to delete them. How do I stop it from automatically recovering these unnecessary messages?
    Also, the spinning circle next to my inboxes won't stop spinning. Which I think slows down Mail entirely... I tried going to Window > Activity and tried to stop the activity, but then it would just start up again. So now I usually just get frustrated with Mail lagging all the time and just quit out of it.

    HI and Welcome to Apple Discussions...
    Check out this thread ...
    http://discussions.apple.com/thread.jspa?messageID=10465676&#10465676
    Carolyn

  • Calendar alert post-Mavericks installation won't stop chiming

    Installed Mavericks yesterday over Snow Leopard (10.6.8) and have had a host of problems that have paralysed my computer use. As someone who's not particularly tech-savvy and relies on their Mac for their living, this has been a nightmare. The most irritating problem has been that I use the glass chime for my calendar alert. Well, it won't stop ringing--it's like a button's depressed and stuck in that position. Can anyone help? It renders the audio unusable now, which means no VOIP calling or audio of any kind as I'm forced to keep it on mute. And I can't find anything on the Internet that indicates anyone else has had the same problem. Can anyone help? (And no idea if this is connected but my mouse is fluttering all over the place, which is yet another annoyance, leaving me wondering why I was so stupid as to upgrade.)
    Thanks!!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for