Nothing appears in SMW01 in condition initial load

Hi,
We have four R/3 systems, we can get conditions by inital download from the first R/3 system, but we can't do it from other three R/3 systems. (DNL_COND_AXXX)
In the R/3 system in SMQ1, we see the job is running but in CRM system it disappears. Nothing appear in SMW01 or SM50. What may be the problem? and how can I debug it?

Hi,
I thunk this is what is happening in your case.
Your CRM system is just linked to one R/3 system for now. That is the reason that it is only getting the conditions from that one R/3 system.
In your scenario you should setup multiple R/3 systems for a single CRM system. I am not sure how you can do it. But i think you can. You need to setup that scenario before you load.
Thanks,
Karuna.

Similar Messages

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

IDM: AS ABAP - Initial Load

Hi,
I have installed IDM server and completed all the initial configuration steps.
I have created repository which connects to the IDES server using the template SAP Netweaver AS ABAP (specific application server).
Now i am running initial load for that repository but nothing is happening. I cant see any job log,system log for that initial load.
I have created another blank test job , which i execute and running fine.I can see the log of that blank job.But nothing is there for the job Initial Load.
schedule rule : on demand and i am executing it by clicking on RUN NOW. If i see the status of the job it shows idle.
Can you please help me in this?
Edited by: Abhilashak on May 5, 2011 9:13 AM

First, make sure it is set to use the correct dispatcher.
Second, go to the Status area for whatever folder that job is in. It should list all jobs for that folder, and any jobs that are "queued" will be bolded.
If it is bolded (it probably will be), it means that the job is queued to run but the dispatcher isn't running it for some reason. In that case, it could be the dispatcher it is set to run on isn't configured properly... Not sure what else would cause that.
I'm talking about this status area:
http://min.us/mvjy3gm

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Initial load conditions in OWB

Hi
We are building Datawarehouse using Oracle warehouse builder and Express.I would like to know about the initial load for each mapping.Currently the mapping is done for incremental load.If i have to do it for Initial load, how it can be done.Is it require to change each mapping individually to run for initial load conditions.After that we have to set the mapping for incremental load. Otherwise using OWB can be done in other way.Pls.can anyone help in this regard
Thanks
Narasimha.

You can create the mappings with input parameters and then input the initial and incremental loading properties (record dates, for example) as parameters for each load.
Regards:
Igor

The firfox stopped opening.. in loads and nothing appears

I was using the firfox... it started getting very slow and then stopped opening... it loads on the screen and then nothing appears and when I get to uninstale it I get a message saying that I have to close the browser... And of course the browser is not there..
OS: Windows 7 enterprise

Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this.

Filter condition in ABAP Initial Load Job

Hi,
   The ECC Initial Load JOb for IDM has been failing continuously because of 'Out of Memory' Exception
Error Description - Unhandled Error in DSERuntime - Exception:java.lang.OutOfMemoryError
   All the FROM PASSES except the "ReadAbapUsers" pass has been running successfully. We believe this could be because of the huge number of Users and User-Role Assignments(2,61,000) present in ECC System.
   Hence we thought of breaking down this process(ReadAbapUsers) into smaller chunks.i.e., fetch all the users with loginuid starting with 1; then 2; then 3 and so on... But we are not sure of the way to implement this. Please suggest an alternative.
Regrads,
Joel

Hi, I dont know if you have resolved this already or not.. but have you considered increasing the heap size ?
-->
Reading stuff from an ABAP system can return a lot entries. The
roles/entries are returned in one big lump of data, and the runtime needs to
have enough space on the heap for this.
Solution
The maximum heap size can be set in the dispatcher prop file.
Locate the the correct dispatcher prop file.
This file is a java properties file. It will be called
"Dispatcher_Service_<dispatchername>.prop" i.e. if the dispatcher name
is "test", the file name will be "Dispatcher_Service_test.prop"
Locate the section
    additional Java options
Set the maximum heap size to the desired size.
i.e To increase the maximum heap size to 512 Mb, set
JAVAOPTIONS=-Xmx512M
You can set more than one java option here, but if you do so, you also
have to set
MXDISPATCHER_EXECSTRING=1
Also note that increasing the heap size has a performance impact. We
therefore do not recommend doing this for the main dispatchers. Instead,
create a separate dispatcher for running large jobs, and do this change
only for this dispatcher.
See SAP Note 1347301

Error appearing in start initial load

Hi Experts,
I am getting an error during execution of the transaction 'R3as' (Start Initial Load). I am using the load object 'IPMBEAPRDSLS'.
When I am running the trasaction, system is throwing the error meassage "Initial Load is already running(or waiting), IPMBEAPRDSLS: object will not be loaded"
Kindly suggest some solution of this problem.
Thanks & regards,
Rupam.

Hello Rupam,
Abort the load of that object in txn:R3AM1.
Also, delete the queue entries like R3AI_<OBJECT_NAME> in txn:SMQ2.
This would let you to restrart the load again.
If again it goes to WAIT state , then it means that you do not have enough number of work processes to handle this load.
It happens if several other load are running.So you have to wait till other loads get finished or you need to increase the work process, if your hardware supports.
Hope this helps!
Best Regards,
Shanthala Kudva.

Initial load of sales orders from R3 to CRM without statuses

1) Some sales orders were uploaded into CRM without statuses in the headers or line items.
2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
Any ideas or suggestions?
Thanks.

Hi,
   Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
R3AC1
   There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
SMQS
, and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
CRS_SEND_TO_SERVER
   If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
SMW01
to see if the Bdocs are fully processed.
Hope this helps...Reward if helpful.
Regards,
Sudipta.

MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
          MacBook Pro (13-inch, Mid 2010)
          MacBook Pro - model: MacBookPro7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
          Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Logitech USB Receiver
                    Apple Inc. Apple Keyboard
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          None
Internet Plug-ins:
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
          AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               4%          WindowServer
               1%          EtreCheck
               0%          mds
               0%          mds_stores
               0%          airportd
Top Processes by Memory:
          111 MB          com.apple.IconServicesAgent
          94 MB          Finder
          57 MB          Dock
          53 MB          SystemUIServer
          53 MB          EtreCheck
Virtual Memory Information:
          1.64 GB          Free RAM
          1.42 GB          Active RAM
          314 MB          Inactive RAM
          390 MB          Wired RAM
          316 MB          Page-ins
          0 B          Page-outs

Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Initial load of Java / JIniator

On our Linux server, we have the config set up so new users will have an auto-download of JInitiator, then they go straight to the login form. However, a new user just tried to get into our system, and it appears that JInitiator is starting to load, but then the loading icon stops moving, and nothing happens. Everyone else that goes to this site gets the JIniiator auto-installed without issue, and even when I turn off the firewall, pop-up blocker, and set security to the minimum, I get the same result. Do you know where I can get some troubleshooting tips? I am clueless at this point.

Because you are dealing with windows and probably 10 or more vendor products that can cause the problem, I would give up on troubleshooting and move on to fixing the issue. I have had a few Win clients where I had to download the specific version to the client, reboot into safe mode, then install it that way.

Initial Load of DD* tables

Hi everyone,
Just a hopefully quick and simple question. We set up a SLT Replication Server recently and created our first SLT Configuration into HANA. We have no need for real time so we choose a scheduled time out of office hours. The configuration was successful however the DD* tables appeared in a scheduled state. From what I thought these tables should populate (load) initially regardless of the schedule. What appeared to happen was that they were waiting for the first schedule to run. Is this expected? Without these populating initially we could not choose any real ERP tables to replicate.
We also tried with a non-SAP source (Oracle) and the DD* tables for that configuration were populated instantly even though that config was scheduled to run "off-peak" as well.
Thanks,
Marcus.

Hi Marcus,
As far as I understand your question, please find below my comments-
(sap source system scenario)
If the configuration is created with "schedule by time" option which I think is done in your case, then the replication server would replicate database changes to target system at the time set by you. Here the metadata of tables would be copied from source system tables[DD002L and DD02T]
yes, you are correct that ideally we should start with ERP tables replication after DD* tables are replicated successfully. This generally is faster but then depends upon the system.
(non sap source system scenario)
here the DD* tables are just initially loaded and not automatically replicated.
So you would find a difference in how the replication takes place in both scenarios.
Hope it answers to some extent for your query.
Regards,
Saritha K

Initial load of data to UCM for Customer Hub PIP

Hi,
What is the recommended approach to have XREF tables populated during an initial load to UCM (via EIM), when the Accounts already exist in Siebel CRM?
Our approach as of now, using EIM, is as follows:
1) Set required customer information in EIM_UCM_ORG
2) Look up the customer's existing Row_ID in Siebel, and populate EIM_UCM_ORG.EXT_SYSTEM_NUM and EIM_UCM_ORG.UCM_EXT_ID) accordingly
3) Run the EIM job and UCM Batch Process to import the customer into UCM
The account then appears in UCM with the correct reference to siebel/row_id under the "external account IDs" tab. HOWEVER, it also contains a reference to a newly created duplicate record for that account in Siebel. Looking at the xref tables, there is no reference to the existing Siebel/row_id specified in the EIM batch load, and our hypothesis is that this is the reason the account cannot be found (and a duplicated is created). What we want to achieve here is to tell UCM that the accounts we are inserting do infact already exist in Siebel CRM, and can be identified by the row_id that we pass along.
The relevant system versions are Customer Hub PIP 11g with AIA 3. Siebel CRM and Siebel UCM are on patch 8.1.1.7 (and pertinent ACRs have been incorporated in the two Siebel instances).
Any hints or suggestions on how to approach this would be appreciated
-M
Edited by: 968713 on Nov 1, 2012 5:05 AM
Edited by: 968713 on Nov 1, 2012 5:05 AM
Edited by: 968713 on Nov 1, 2012 5:06 AM

Do you really need to populate the XREF table/transaction History table for initial load?

Initial Load of BUAG_MAIN (Business Agreements) IS-U = CRM

Hello. We are integrating ISU to SAP CRM 7.0.
We have been replicating Business Partners between the two systems for a couple of years, and now wish to begin replication the Business Agreements <=> Contract acconts objects (BUAG_MAIN)
In our development system, in order to successfully process the initial load of BUAG_MAIN, I had to RE-run an inital load of BUPA_MAIN. I am really unconfortable having to do this in our productive systems!
My question to you experts:
Is there a way to run an initial load of a dependent object (BUAG_MAIN) without having to re-run an initial load of the parent object? Any suggestions would be greatly appreciated!

Hello Pratik,
- There are no dumps in ST22
- There are no errors in SMW01
- No. range settings are set as following:
CRM: Master Data-> Business Agreement-> Define Number Range for Business Agreement:
No.     From number         To number          Ext.
01       000100000000       000199999999     X
02       000200000000       000299999999
ERP/IS-U: Financial Accounting (New)-> Contract Accounts Receivable and Payable-> Basic Functions->Contract Accounts->Number Ranges and Contract Account Categories
No.     From number         To number          Ext.
01       000100000000       000199999999
02       000200000000       000299999999     X
But before inital download we have set all no. ranges to External as prescribed in the set-up and load guide for business agreements and contract accounts.
(There is just one Business Agreement Class and one contract account category)
Hope to hear from you soon.
Kind Regards
Saima

Nothing appears in SMW01 in condition initial load

Similar Messages

Maybe you are looking for