NOTHING APPLE CAN CONNECT!

it seems as though nothing 'apple' on my computer can connect with anything apple.
Firefox works but...
Safari is useless, itunes wont connect to the store radio or podcasts, quicktime content guide tells me to connect to the internet, iphoto wont update or let me order prints, nothing is working.
Still, i am on the internet .. firefox works fine.
help?

Almost as aggravating as someone yelling!
Apple Net APPs & Firefox have 2 big differences for clues to your problem.
Did you install any 3rd party Net Apps lately?
1st, check your Network Control Panel>Configure:>Proxies Tab, then uncheck any set Proxies.
2nd, try putting these in Network>TCP/IP>DNS Servers:
208.67.222.222
208.67.220.220

Similar Messages

Lost my phone is there anything apple can do?

lost my pone (stolen) is there anything apple can do or what should I do?

Depends where you are
if in the UK , tell your carrier so they can block the sim to protect your usage
Nothing Apple can do .

Hey Community, i have an iphone 5 recently doesnt work, it's showing apple in middle even i connect to itunes there is nothing. Can someone tells me the problem please thank you

Hey Community, i have an iphone 5 recently doesnt work, it's showing apple in middle even i connect to itunes there is nothing. Can someone tells me the problem please thank you

you could try forcing it into recovery mode by turning it off, hold the home button and plug it into iTunes at the same time, keep holding the home button until iTunes says its detected a device that needs to be updated or restored. Then restore.

Access Point - AIR-AP1231G-A-K9 - PCs can connect but Apple Macs Cannot ...

Hello,
This is a sort of follow up to a post I made a few days ago. I made changes to my access points and on Windows computers everything works but on Apple products (Macs, iPads, iPhones) the strangest things happen.
(1). About 90% of the time nothing works in that we get NO connection to the Access Point. In the client association logs we see the Mac Address show up but there is a 0.0.0 address where it seems like the device is trying to get an DHCP lease. After a while, the device gets the IPPA address of 169.X.X.X.
(2) After a extended period of time (an hour or more) the Apple device eventually gets an IP address from the network and then is able to successfully connect to the network. However, the connection is short lived and drops after about 30 minutes to an hour.
Is there a problem with the way Apple products encapsulates their network traffic versus Windows or other products?
Again, this not affect any Windows or Andriod based devices (laptops, phones, etc.) They can connect right away and never drop out.
Below is the configuration file for the AP in question, although this is affecting all of our APs:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP-5
enable {Authentication Information}
enable {Authentication Information}
username {Authentication Information}
username {Authentication Information}
ip subnet-zero
ip domain name {Domain here}
no aaa new-model
dot11 ssid (Secure) Staff/Faculty
   vlan 70
   authentication open
dot11 ssid Public
   vlan 60
   authentication open
   guest-mode
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid (Secure) Staff/Faculty
ssid Public
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
no cdp enable
interface Dot11Radio0.60
encapsulation dot1Q 60 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
no cdp enable
bridge-group 70
bridge-group 70 subscriber-loop-control
no bridge-group 70 source-learning
bridge-group 70 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.60
encapsulation dot1Q 60 native
ip address 10.60.255.5 255.255.0.0
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.70
encapsulation dot1Q 70
ip address dhcp
no ip route-cache
bridge-group 70
no bridge-group 70 unicast-flooding
bridge-group 70 spanning-disabled
interface BVI1
ip address 10.60.255.5 255.255.0.0
no ip route-cache
ip default-gateway 10.60.0.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
bridge 1 route ip
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
end

For initial configuration you can access AP from the Console port.
Following are the guides you need to look at for configuring you 1600 AP :
Cisco Aironet 1600/2600/3600 Series Access Point Deployment Guide
Getting Started Guide: Cisco Aironet 1600 Series Access Points
Moreover you can check the configuration guide from cisco.com/google, based on the Actual software image your AP is running. Some of the newer IOS for AP you can check here.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... " I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

Your profile indicates your Mac is running v10.7.2
If that is correct, updating your system software may help.
Click Software Update from the Apple menu.
Restart your Mac after updates are installed then try the App Store.
If you can't update that way, there's a workaround.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac and try the App Store.
messaged edited by: cs

My IPad says that it isn't backed up and needs to be connected to wifi plugged in and lock and I try to click ok and it does nothing what can I do?

My IPad says that it isn't backed up and needs to be connected to wifi plugged in and lock and I try to click ok and it does nothing what can I do?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes?

Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes? Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?

Is there any way that Apple can block another user from connecting this stolen device to iTunes?
No.
Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
No. Apple can do nothing to help. Sorry.
Reporting a lost or stolen Apple product
B-rock

Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help

Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help

My paper work for my linksys says WEP 64 bits. I've tried changing my IPOD to that and it will say put in password and when I do I get "invalid password" or can not connect. This has been in the last few weeks. I have researched this for the last 2 weeks, called apple and they said it's not my IPOD, called Linksys and they want to charge $30 to fix it. How do I change my router without totaly not messing it up?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

TS3988 iCloud will not accept any passwords after upgrading OS. 2 days of trying every password I have ever used, AND changing Apple ID and iTunes ID, still nothing. Can't backup on iCloud anymore.

How can I use iCloud again after upgrading OS to Mountain Lion? 2 days of trying every password I have ever used, AND changing Apple ID and iTunes ID, still nothing. Can't backup on iCloud anymore.

Apple ID's can be used for anything, a single ID can be used for all your accounts (ie iCloud, iTunes, MAS, Apple community etc), ideally this would be the way forward. So far as iTunes goes you need to continue to use the same ID as you have always used or you will lose access to your previous purchases and your iTunes match subscription.
If you are using a second ID for iCloud, you can continue to do so or use the ID you use for iTunes, but if you choose the later you will need to move all your calendar, contact etc data to the account using the ID you use for iTunes.
When (if) you change which account you use you would delete the account on an iOS device and log back in with the correct details, on a mac you would sign out in the iCloud system preference pane.

What is the maximum number of Apple TVs (3rd gen) you can connect to 1 Mac running iTunes?

I have one Mac with my digital library running iTunes 11 and seem to be having problems keeping Apple TVs connected (via home sharing) when I get up around 10 Apple TVs on the network.
The Mac is running Mountain Lion with all software updates installed, iTunes 11, and the Apple TVs are all running 5.1.1 (the latest at this time).
I am not asking how many computers can authorize via iTunes to use the same Apple ID - that answer is 5. I have read in multiple places that the number of devices (e.g. Apple TVs, iPods, iPads - not computers) that can sync content to an iTunes account is unlimited, but I don't think that's entirely true.
I'd like to keep this conversation about the number of Apple TVs you can have home shared to a single Mac / iTunes library via home sharing.
I am also not asking how many a network could support via concurrent streaming, etc. That's not relevant. We only use 1-3 Apple TVs at any given time simultaneously, and streaming simultaneously to as many as 3 Apple TVs hasn't ever been a problem.
I recently upgraded all my Apple TVs in this house to generation 3 units - I have 12 of them in all, but once I connected about 10 of them I started having problems (at least I think it was 10).
Does anyone know the official limitation (if there is one) ?
The problem that I am having is that even though I have a great Wi-Fi N or wired gigabit connection at each Apple TV, and the correct home sharing Apple ID on each Apple TV and iTunes on the Mac, when I try to access "Computers" via the Apple TV menu, I get this error:
Could not connect to "My Library": Make sure the computer is on the same network as your Apple TV, the iTunes version is up to date, and iTunes is running.
Now if I restart iTunes, I can get the Apple TV I am currently troubleshooting to connect, but then if I go to a different Apple TV, it gives me the same error. Restarting Apple TVs doesn't fix it, only restarting iTunes seems to. But I can't seem to get multiple units to see the Library simultaneously.
Thanks to anyone who provides help on this.

Apple TV is by it self in a category.
With Apple TV 1 the limit was 5 Apple clearly stated that. The reason? Probably because the Apple TV 1 had a hard drive and was able to store content locally (quite a bit actually). This would make it more in line with authorized devices.
You authorized device limit is 5 but this does not pertain to home sharing again something different.
When you play content from an Apple TV you are streaming from an authorized device and as long as you have the same iTunes account on that Apple TV as the iTunes you are connecting to you will be ok.
Now to the error. I have also had this error and I had it on a network with only 1 Apple TV connected and it is since iTunes 11. It seems every time Apple updates iTunes it has a bad effect on Apple TV. So I would not relate this error to the number of Apple TV's you have, every time I get this error I restart the Apple TV and its fine again.
On a side not I used to run MANY Apple TV's off my xserver. I had my families homes networked with VPN. I would prefer to not say how many but it was quite a few. biggest problem there was multicast over VPN....whole other story.

Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

GEESAR wrote:
hi there
is there anyway i can use the unlimited data i have from my mobile network provider (o2) on this i pod touch 4 generation the latest model NO.
and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider NO
if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
geeeeesar also how does this ipod touch4 pick up the wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of. These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants. Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for.
thanks can i pod touch 4 generation download movies too please help thank u very much.... Yes. If your iPod has a WiFi connection and you have an account with a service like NetFlix....

I changed my apple ID successfully online on my iPad and iPhone but when I wish to buy an app, the old ID comes up automatically and there seems to be nothing I can do, so I cannot update or buy any apps.

I changed my apple ID successfully online on my iPad and iPhone but when I wish to buy an app, the old ID comes up automatically and there seems to be nothing I can do, so I cannot update or buy any apps.

Welcome to the Apple Community..
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

NOTHING APPLE CAN CONNECT!

Similar Messages

Maybe you are looking for