Nothing but a Blank, White Homepage

All I see when I open Skype is this. I have tried restarting my computer (Macbook Pro), closing the application, redownloading. Nothing. The problem started last night. Any ideas as to what's going on?

then your problem is with Main.
what's your document class? what's the class of your MainScene variable? (and, those can't be the same.)

Similar Messages

HT201263 My ipad will not show the recovery mode, it goes into DFU mode just fine, but whenever I put it in recovery mode I get nothing but a blank white screen. After doing a restore or update itunes gives me error 37. This all happened due to a failed u

I updated from ios 5.0.1 to 5.1. Midway through the update itunes crashed. I got it all working again and ever since I have been stuck in a recovery loop. DFU mode works fine, but when I go into recovery mode (yes I am doing it right, yes I have tried pwning, tinyumbrella, etc.) it still just gives me a white screen (I am not getting the plug arrow and itunes icon screen that shows up when you are in recovery mode). I am a huge fan of hacking, mods, and jbs, BUT have never done any on the iPad, (found it pointless).. nevertheless, I am stuck thanks to apple in a white screen and a nonworking iPad. If anyone has any ideas that does not include jbs, updating, restoring, restoring with internet off, restoring in DFU, I would gladly appreciate it. I would take it to the apple store but it was a friends and I didn't purchase it. My friend had the issue formerly and they had no idea what to do at apple (they usually try DFU, restore, and then have nothing else to tell you.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

HT1491 Going into iTunes from my iPhone 4...the page where it is supposed to be showing tones or music(I can switch between them all) is nothing but a blank white page...how do I fix this?

It worked the first couple days...I even purchased ringtones.

instead of writing such an essay, you could have explained better what you tried to do to get them.

You Tube videos don't play. The site comes up, but a blank white screen where the video should be.

When I try to play videos from You Tube, I get a blank white screen where the video should be. When I go to full screen the whole screen is white. Originally the white screen happened on the expanded view only.
IE doesn't have the problem, but Google chrome and Firefox 4.0 do.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Try to disable the hardware acceleration in the Flash Player.
See:
* https://support.mozilla.com/kb/Cannot+view+full+screen+Flash+videos
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Store status bar shows that it is connecting, but only blank white screen

My iTunes library is fine, but when I was trying to add new music from Store, will NOT connect. The status bar on top shows it is connecting, and I even got just a "flash" of the store on my screen, but then just goes to blank white screen, no error message at all.
Very frustrating!

I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading

When I open up a 2nd tab from my gmail I get nothing but a blank screen & no search bar

When I open firefox I go into gmail right away or renew my session. When I go to open a 2nd tab to search for something on the interenet I get a blank white screen w/no search bar. I then tried going to the orange firefox dropdown box and click on find. This does no good either.

I would just like to add to this thread. I have tried everything and every way listed here and found my own solution, for those of you who were having the same issue as me.
1. Type "'''about:config'''" in your search bar
2. Click "'''I'll be careful, i promise'''"
3. Type "'''newtab'''" in the search bar
4. Find "'''avg.userPreferences.newtabDisabledByUser'''"
5. Set value to '''true''' by either '''doube clicking''' or '''right click > toggle'''
This immediately deactivated the AVG new tab feature and reset my browser to it's default settings.
Hope this helps!

Scanner scanning documents but showing Blank white screen

When I click on scan,The status is showing as in progress,then the preview is not showing any image just showing blank white color.
though the scanning is done,Document is not scanned,just showing white blank color
OS:windows8.1
Printer name:Laserjet M1136 MFP

Hi Avinashaaaa,
Try and make a copy to see if you get a blank page.
Were you trying to scan from the ADF or the glass?
Make sure there isn't a paper on the ADF and the glass at the same time.
Try scanning from the other one to see if you have the same results.
I would do a hard reset if you are still having issues.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
The scanner mechanism bulb might not turn on when trying to scan, copy, or fax.
There are two main causes for this issue:
It could be the scanner bulb temperature is too low or there is an internal or external electrical malfunction.
Please keep the scanner lid open and then press the copy button.
Check if the scanner bulb glows.
Also to see if the scanner moves freely across the glass.
Let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

All I am seeing now with FIrefox is a blank white screen on any website. I have attempted to unistall and reinstall twice. Still nothing, but a blank. This is with Firefox 5.01 in windows 7 64-bit home

Application Basics
Name
Firefox
Version
5.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0.1) Gecko/20100101 Firefox/5.0.1
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Norton Toolbar
2011.7.0.8
true
{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Symantec IPS
3.0
true
{BBDA0591-3099-440a-AA10-41764D9DB4DB}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
www.google.com
browser.startup.homepage_override.buildID
20110707182747
browser.startup.homepage_override.mstone
rv:5.0.1
extensions.lastAppVersion
5.0.1
network.cookie.prefsMigrated
true
places.history.expiration.transient_current_max_pages
128547
privacy.sanitize.migrateFx3Prefs
true
Graphics
Adapter Description
NVIDIA GeForce GTX 260
Vendor ID
10de
Device ID
05e2
Adapter RAM
896
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.17.12.7533
Driver Date
5-20-2011
Direct2D Enabled
true
DirectWrite Enabled
true (6.1.7601.17563, font cache 18.56 MB)
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.611)
GPU Accelerated Windows
1/1 Direct3D 10

Aaah that makes sense, the only problem i have now is that when in my gideonmarshall.com add cname record page i have the following option :-
Host name (then a blank box to type in) .gideonmarshall.com
points to (then a blank box to type in)
(how i set it up originally is - Host name (WWW) .gideonmarshall.com
points to (web.me.com)
what do i type into the host name box now to get gideonmarshall.com to redirect to either www.gideonmarshall.com or web.me.com?? I would have thought that anything i type in there would just create another sub domain which would then compound my problem and i can't leave it blank. Also would it be best to do this as a new cname record directing gideonmarshall.com to www.gideonmarshall.com, or for me to just sort out the initial cname record i created so it directs gideonmarshall.com to web.me.com and if that is the case what would i put in the host name box since i can't leave it blank??
Thanks for all your help so far, fingers crossed this last bit is easy

Nothing but a Blank Screen/ TimerClass problem? EventListener?

When I test the code below nothing happens. I just get a blank screen.
What is supposed to happen?
When the program opens a splash screen should be added for 3 seconds and then fade out. Then some main screen movie clips should be added to the stage.
package
    //**************** IMPORT STATMENTS *********************
    import flash.display.MovieClip;
    import com.greensock.TweenLite;
    import flash.utils.Timer;
    public class Main extends MovieClip
        //***************** Variables ***************************
       private var MainScene:Main = new Main();
        private var PopUp_MoreApps:MoreApps_mc = new MoreApps_mc();
        private var PopUp_About:About_mc = new About_mc();
        //*****SPLASH SCREEN ***
        private var mc_timerSplash:Timer;
        private var splashScreen:mcSplashScreen;
        //*****************CONSTRUCTOR CODE ********************************************************************* **************
        public function Main()
            mc_timerSplash = new Timer(3000,1);
            mc_timerSplash.addEventListener(TimerEvent.TIMER, StartTimer);
            //When timer is finished stop the timer;
            mc_timerSplash.addEventListener(TimerEvent.TIMER_COMPLETE, timerCompleted);
            splashScreen = new mcSplashScreen();
            //Adds the splash screen
            addChild(splashScreen);
            splashScreen.x = stage.stageWidth / 2;
            splashScreen.y = stage.stageHeight / 2;
            mc_timerSplash.start();
        //*********** FUNCTIONS *********************************
        private function timerCompleted(e:TimerEvent):void
                mc_timerSplash.stop();
                mc_timerSplash = null;
        private function StartTimer(e:TimerEvent):void
            TweenLite.to(splashScreen, 1, {alpha:0, onComplete: SplashScreen});
        private function SplashScreen():void
            removeChild(splashScreen);
            addMainScene();
     //adds the main screen movieclips
      private function addMainScene():void
            addChild(MainScene);
            MainScene.x = 489;
            MainScene.y = 350;
            //TweenLite.from(MainScene.wbbIntro_mc, .5, {alpha: 0});
            TweenLite.from(MainScene, 1, {alpha:0});
            TweenLite.to(MainScene.girls_mc, 1, {y:395, delay:.3});
            TweenLite.to(MainScene.boys_mc, .5, {y:396, delay: .6});
            TweenLite.to(MainScene.Joe_mc, .5, {y:339, delay: 1});
            TweenLite.to(MainScene.Paul_mc, .5, {y:322, delay:1.2});
        private function removeMainScene():void
            removeChild(MainScene);
            TweenLite.to(MainScene.girls_mc, .1, {y:690});
            TweenLite.to(MainScene.boys_mc, .1, {y:693});
            TweenLite.to(MainScene.Joe_mc, .1, {y:636});
            TweenLite.to(MainScene.Paul_mc, .1, {y:619});

then your problem is with Main.
what's your document class? what's the class of your MainScene variable?   (and, those can't be the same.)

Nothing but a blank blue screen...

Hello all,
I installed the 10.4.8 combo update this morning, and now when I boot up my machine it leaves me with a blue screen - nothing else. (It's the blue screen that the log in window is usually in front of, not a desktop background.) I have control of my mouse, but no keyboard commands, no dock or anything else.
When I restart, sometimes it goes to a black screen with something about a Darwin log in, but that disappears and up comes the blue screen before I have a chance to type anything in. (Not that I'd know what to type in anyway.)
Any helpful hints? Thanks!

.
One of my Dual G-5s exhibits the same behavior. ... I started it as a Target disk with an already updated powerBook. ... I ran Disk Util, and fixed some permissions, but the disk was ok. ... It did show me a couple screens before it became blue. ... It said that it was loading Mac OS X, then it turned blue.
It seems to be in some sort of loop, where the screen lightens, and darkens very slightly, you have to be watching it to see it. ... Once it said it could not pair with the bluetooth Keyboard. That screen was only on for a few seconds. ... In the morning I will hook a wired keyboard to it and see what happens before I take it in to Apple.
I installed the 10.4.8 combo update this morning, and
now when I boot up my machine it leaves me with a
blue screen - nothing else. (It's the blue screen
that the log in window is usually in front of, not a
desktop background.) I have control of my mouse, but
no keyboard commands, no dock or anything else.

When fire fox newest virson down loads and installs i get nothing but a blank page

when your new version down loads and installs i get a blank page and fire fox does not work then i have to go to a restore point to remove the down load
== This happened ==
A few times a week
== new version down loaded

This would happen for only some sites, mostly Google related sites, or sites that had things from Google embedded in them. The page would be blank and if I viewed the source it would simple have a "1" in the page source.
* Clearing all cookies, cache, logins, etc worked for me (Press ctrl+shift+delete). Clearing just the cache did not work, had to remove everything *
I'll report back if it crops up again.

Whar do you do if you go to the app storee on your iphone 5c and get nothing but a blank screen?

What does one do if you go to the app store on an iphone 5c and all you get is a blank
screen?

Hi hs from sc,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if you only see a blank screen when you visit the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

TS2771 Updated settings in iPod now I have nothing but a blank screen

MY son update his settings in his iPod he now has a blank screen

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My website is a blank white screen!

Hi. Last weekend I added a couple of blog entries to my site (first time I've used iWeb THIS YEAR). When I hit "publish", I had publish errors. I tried a couple more times and finally it told me my site had been published, but when I went to my site, the new entries weren't there. Perplexed, I decided finally to try using "publish all to MobileMe". That process took about 90 minutes. I got the message that my site had been published again, only this time when I went to my site, I get nothing but a blank white screen! My site is gone! Any help would be appreciated.

Hi
I have the Same problem with a white Homepage instead of Pictures and so on. But in my case, it's not the first, but all other pages My HP is www.timojahn.de
Can you help me please as well? What I did to create a HP is: I createt a white page Px 1020 X 624 duplicatet it and I set an Ok for "add to the navigation but I did not set an ok or the show navigation. Beside that I set an empty Box over the background pic. That textbox is blank and I use that only to create a hyperlink.. Sorry for my English. I'm German...
It would be great if you could give me a hint.
Thanks,
Best wishes
Timo Jahn

Help, iTunes store is displaying a blank white screen...???

I get nothing but a blank white screen when visiting iTunes-Store. It was working a couple of days ago. Does it have something to do with upgrading Flash-Player (I hope not)? Is anyone else having this problem?

I suppose when Apple decides that my money is important to them then they will fix this issue. I can view the iTunes store with much older versions of iTunes and Safari on several other accounts and computers in my house.

Nothing but a Blank, White Homepage

Similar Messages

Maybe you are looking for