Nothing but Static
A little ill with ipods so far. Purchased over a thousand dollars worth for Christmas presents and so far, 2 of them seemed to have bit the dust on me. My daughter's nano plays nothing but static. I have been thru the 5 R's twice. Any other suggestions? Please!!
Have you tried it with other headphones? If it doesn't work with any headphones, you'll probably ahve to send it in for service.
Check this out:
iPod Service Request
I hope this helps!
Similar Messages
-
X-Fi XtremeGamer: Getting nothing but static in Game M
So I have an X-Fi XtremeMusic card being identified as an XtremeGamer and everything was fine up until the past few weeks. Recently, I've been getting problems where I go into game mode, I get nothing but static. Every sound I try to play is replaced by static and it's been bugging the hell outta me. I've tried re-installing the drivers, but to no avail. And sometimes, the problem isn't just limited to game mode. Every now and then, I'll also get no sound when using Entertainment mode, while my game mode would be working fine.
Basically, I haven't had an instance yet where all 3 of the modes work normally. It's usually one of the modes having problems whilst the other 2 are working fine. Please help!
System specs:
Windows XP Pro SP2
EVGA nForce 4 SLI Mainboard
AMD Athlon 64 X2 Dual Core 3800+, 2200 MHz
024MB RAM
NVIDIA GeForce 7800 GTHi,
Are you using the current beta driver? -
"The Future of the Gravity Boy" by Infadels contains nothing but static.
I recently noticed that the entire album "The Future of the Gravity Boy" by Infadels contains nothing but 3 second clips of static, instead of the actual songs. Here's a link to the album I'm talking about:https://open.spotify.com/album/3OQ4dSIvojhfeaFSwxG23N Thanks in advance,Hugo2607
Ghost1227 wrote:
Dusty wrote:
Ghost1227 wrote:I wouldn't want to post via Planet, but the possibility of making it a 'rolling release' kinda deal is interesting.
That's really just a blog, though, when you think about it.
Which brings an interesting thought: Rather than requesting people write content specific to the magazine, maybe it would be easier to mine some of the numerous blogs for magazine content. Then you have access to content that people are already voluntarily writing. All you need to do is request permission from various blog authors to reprint their stuff. You could then have a blog of your own (crouse'll set you up on archlinux.me, I'm sure) to release the "normal" content: devland, interviews, at your convenience, with no hard deadlines.
Dusty
Much as I love what crouse is doing... I have three servers... i can self host!
This just in, the latest headline for ALM: "Mess with Ghost and you'll be toast!" -
Record External Source (bit/hz config?) Nothing But Static
:Record External Source (bit/hz config?) Nothing But StaticY Okay - I'm ready to be mutilated for posting this, but I've searched for HOURS so feel free to talk to me like I'm a total noob/fi've year old (but a smart fi've year old).
I just purchased the PCI Express X-Fi Xtreme Audio card am I am trying to record the audio from?an external source (my?DirecTV receiver.)? I have the optical cable directly connected from the receiver to the S/PDIF-IN and all other cables (HDMI) disconnected.
A few questions:
-Do the settings (control panel>sound>recording) for bit/hz have to match those of the Creative MediaSource?
-Can you record directly from a DirecTV HD-DVR?
I've tried a lot of different settings and all I get is NOTHING but white noise/static and?the pitch/rate varies depending on the settings I am using. I'm lost.>? <img align="top" width="577[/img] src="http://i44.tinypic.com/2d7zytk.jpg" alt="options" height="440">
I am using console launcher and there you have to set your recording source.......do you see where I have hovered over the recording source where it gives me three choices? Here you can pick yours. If you have the wrong source you will get static. In your sound, recording properties, there you can set your default bitrate.
If you have the wrong recording source, it will sound like white noise, or intermittant jibberish. I have never done a session of which you speak, but I am guessing when you have plugged in your digital satelite, you can try the "What U Hear"? feature to record sound to make sure your sound is being picked up on the PC. Then change your source to pull directly from the digital in.
cheers,
jmacguire -
My older system broke awhile back and i built a new one, i was using on board HD audio but today i decided to put my old xfi card in my new system. I didnt put it in there in the first place cause drivers sucked and they havent updated them since may 30th so no change there. :P
Anyways my problem is kinda strange. After i install the driver and it asks for reboot i can say no and then play some music and it sounds great highs lows its all good. But after reboot its just static, starts right after the os loads. If i play music or games theres nothing but static and its very loud I almost had a stroke the first time. So some help plz?specs
Asus p5k deluxe/wifi
intel Q6600 quad core
4gigs ddr800
nvidia 8800gtx
850wat silverstone psu
xfi xtreme music
vista 64bit -
Upgrade to Firefox 4.0 has caused nothing but problems. Unable to click links, access websites, etc. How can I downgrade to previous version?
Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
SSRS Export to text and NOTHING BUT TEXT!
Is it possible to export a report to text only format? When I export my report to csv and then use the old DOS command to "type" the exported csv file there is a horrible little character at the beginning of the file.
I need to export just as text and nothing but text to drop the exported report into a 3rd party service which processes it. This squiggly little character is tripping the 3rd party system. I cant believe something so simple is not supported natively by SSRS?
I'm using SQL Server 2008 R2.
Please help!
LightSwitchShells.comHi Hale,
Please try to add the following text in the rsreportserver.config to work around the issue.
<Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering">
<OverrideNames>
<Name Language="en-US">TXT (Pipe Delimited Text File)</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter>|</FieldDelimiter>
<Extension>TXT</Extension>
<Encoding>ASCII</Encoding>
<NoHeader>true</NoHeader>
</DeviceInfo>
</Configuration>
</Extension>
By default, the rsreportserver.config is locate in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
There is a document about Export Tab Delimited text file in SSRS 2008 R2, you can refer to it.
http://revweblog.wordpress.com/2011/09/26/export-tab-delimited-text-file-in-ssrs-2008-r2/
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
Software update, nothing but headaches.....
About two weeks ago, I woke up to a message on my phone that said a software update had been downloaded and the phone needed to restart to install. I wish I'd known then what a headache this was going to cause me.
A few days later I noticed that my phone wasn't ringing, my notification sounds weren't playing, and my alarm was going off on the screen but no sound. I always use my phone as my alarm clock, but can't trust it now. I turned my phone off and back on and the problem resolved. It has done it 5 or 6 more times since then. I'm on call for my job every three weeks, and I couldn't trust that my phone was going to ring this past week. Very frustrating.
I've also had an increase in problems making calls and typing text messages. When I try to make a call it acts like it is connecting but I don't hear the phone ring or anything. My husband said it is connecting, and he can hear me, but I can't hear anything. When typing text messages, it will freeze up and I have to exit the message and go back in before it will let me type.
I'm loathe to do a factory reset because of the amount of time it takes to get the phone back to the way I like it. Is this going to be my only option? When I first got my Droid 2, it was replaced twice in the first three months because I had nothing but problems. The 2nd time was a refurbished Droid 2 Global and it has been an OK phone. I've spent so much time dealing with technical issues though that I'm about ready to send Verizon a bill for my time.
I'm not able to upgrade until August, but I can assure you I will never buy another Motorola phone.
Is anyone else having the same problems since the update? Any solutions to the problems I'm having?Have you tried booting in Safe Mode and see if the device works as needed? Try follow these steps and if this doesnt help then I would say its time to try a hared reset because issues do have a habit of showing its evil head after a update because of the update process changes and updates files but doesnt delete any personal settings and the old settings sometimes cause issues..
Try booting in Safe Mode and then consider a Hard Rest.
Enable Safe Mode
Press and hold the Power button.
Select Power off.
Slide the keyboard open.
Press the Power button.
Press and hold the OK key.
Continue to hold the OK key until Safe mode appears in the lower-left of the unlock screen.
This may take up to 30 seconds.
While in Safe Mode, remove the most recently installed applications.
Power cycle the device then attempt to use the device.
If the device works properly, install applications one at a time to identify the application causing the problem. -
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)” occurred. Following directions found at https://discussions.apple.com/message/15087646#15087646, I now get the following “iTunes.exe - System Error The program can't start because AVFoundationCF.dll is still missing from your computer. Try reinstalling the program to fix this problem.”, Along with “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)” I am running Win 7 Ultimate 64 bit on HP TouchSmart tx2-1275dx. I was one week away from buying an iPad but not if this is what I have to deal with. Please help
I actually managed to resolve this on my own by downloading iTunes from the Apple website and reinstalling iTunes that way. Here's the link: http://www.apple.com/itunes/download/ That should fix your problem. Good luck!
-
I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!
yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.
-
I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be restored. Now it won't connect to itunes or my computer at all and is nothing but the black start up screen with the apple logo, or it's just a white screen. What happened?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
my 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down. Then I've connected it to my macbook pro, and I've seen the script "Please Wait - Very Low Battery", but, after some time, the iPod tries to start up again, and nothing happens. It's a kind of noise, I'm thinking about the hard disk, (it's a 80Gb version), and I'm listening to it; every 30 seconds seems to try to open and then shut down again. I can't see the iPod in iTunes too. Don't know what to do. Can someone help me? Thanks a lot, it's my first forum
It sounds like the battery could be going bad as well as the iPod's Hard drive. You'll want to have the iPod serviced either by Apple or a third party repair company. Here is Apple's pricing:
http://www.apple.com/support/ipod/service/prices/
Google for "iPod repair" and you should get a ton of results to work with.
B-rock -
I downloaded my sons ipod 5g with the latest iOS and now when we try to sync it says we have no space, but there is nothing but a few apps on his ipod and he has plenty of space. The messege says that most of is space is taken up by video but there is no video or music on his ipod right now. I've tried to reset his ipod but that did not help the problem. What can I do?
Did you try to set it up again as new device?
How to back up your data and set up as a new device
Maybe you are looking for
-
No Disk Error - How do I resolve this...
Every now and then while using itunes or connecting my ipod I get a box popping up saying: header; iTunes.exe - No disk There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR5. I try and click cancel or continue and someti
-
Return process in Scheduling agreement and correction delivery creation
Hi Experts, I have couple of Questions: 1) I want to know the return process in case of scheduling agreement, how exactly we should go about it. 2) Regarding creation correction deliveries in the scheduling agreements. I enter in a valid scheduling a
-
How can i make my photos only 500kb
My 15 year old digital camera finally died. I want to use my iPhone camera, but the pic sizes are too big. I need then 500 kb or less. I sell on eBay and my auction management software (Vendio) can't do my iPhone pix because they are too big. Is
-
Hi there My computer has a kernal panic when I try and boot from my Install Disc. TechTool Deluxe is showing no hardware problems, I have repaired disc permissions with Disc Utility. I have just had the superdrive replaced under applecare warranty. I
-
Changing user's configurations for all users
Hi. My users connect to SBO (2007) from a Termainal Server. Now I want to set them all new settings (such as Language, Company Name). Is there a way to have a batch update for all the users or must I change every user's profile manually? Beni.