Nothing happens when pressing Play on any track

Description
Spotify looks to be working fine but when I select something to play nothing happens.  The Pause Button is visible suggesting the song is playing but the progress bar for the song stays at 0:00. This happens if I try to play radio, select a specific song, everything. I tried the clean reinstall but this hasn’t resolved anything.
My Operating System
Windows 8.1
64 bit
Do you have a Service Pack installed?
I don’t think so
My Spotify version
0.9.6.72.ge389c074
My internet provider and country
Comcast US
Did you do a clean install of your current Windows version or did you upgrade from a previous version?
Upgraded from Windows 8
 My username
1222110670

Not helpful.  Just installed.  Halfway through one playlist and it won't respond.  B.S.

Similar Messages

  • HT1766 I have a pop up about  Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Plea

    I have a pop up about  Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Please can e frozen and having tried to turn off I cannot slide to turn off. Please can you help

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • MAC: Premiere Pro won't play. Nothing happens when pressing spacebar, nor play button on timeline

    Help!! Deadline looming! Nothing happens when I press play on any window or spacebar in Premiere Pro. The play button turns to stop and nothing else happens. I have also installed Premiere CS6 and everything works fine there.

    Hi franciscobelda,
    See if this help article works for you: http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html
    Thanks,
    Kevin

  • Nothing happens when I click on any app in the iTunes Store

    I launched my iTunes and clicked on iTunes Store link on the left. The iTunes Store home page loaded as usual. However when I tried clicking on various apps to view their details, nothing happened. Occasionally the "Accessing iTunes Store" message appears in the status window for a split second but even after it went away I am still on the iTunes home page.
    I can still download apps, but only if they have a price or free button next to their titles. Also, I am able to search for apps. But likewise, nothing happens when I click on the search results to view the apps' details.

    Try setting Firefox as the Default Browser.
    https://support.mozilla.com/en-US/kb/How%20to%20make%20Firefox%20the%20default%20browser

  • Nothing happens when I click on any Help pulldown menus

    I have a G3 iMac and use a Seagate 160GB external hard drive. I've maxed out the memory on the iMac -- I only have 500Mb left. Yesterday, I noticed that none of the Help pulldown menus worked -- e.g., when I click on Mac Help or iPhoto help, nothing happens. Also, when I try to open iCal, nothing happens. Do I need to delete some files and create more room on the internal hard drive to open Mac Help and iCal?
    Any advice would be appreciated.

    Use Disk Utility to repair Permissions. You can find DU in Applications/Utilities.
    Click on your hard drive name at left, then the "Repair Permissions" button at bottom right. It will take a few minutes. This is normal.
    Run "Cron" maintenance scripts. This normally only happens between 3 and 5 AM, when the computer is powered on. But with help from Terminal they can be run anytime. (Terminal is also in the Utilities folder)
    In Terminal: (TYPE) sudo periodic daily weekly monthly (PRESS ENTER)
    You will be prompted for your admin password - you will not see the password as you type it. Press enter again. Cron scripts will take a couple of minutes to execute - be patient.
    Use Terminal to Update Prebinding (Optimize the System)
    (TYPE) sudo update_prebinding -root / - force (PRESS ENTER)
    Enter your Admin password as above.
    You should restart the iMac after running the above tasks.
    If you feel uncomfortable using Terminal, go to
    http://www.versiontracker.com/macosx
    and look for "Onyx" (freeware) or "Cocktail" (shareware) they do all the above, and a couple more things for you in a nice GUI package.

  • Nothing happens when pressing the adobe button to call BAPI

    I have created adobe form using the Adobe LiveCycle 7.1 and everything looks fine; when I created the Data Connection the wsdl file was found, the BAPI was brought into the left hand side of the screen, I was able to drag and drop the fields I wanted and finally drag and drop the action Button to call the BAPI.
    The problem I have is that when I launch the pdf file, fills out the fields and click on the button, NOTHING happens.
    On my adobe I have 3 fields where the master data created by the BAPI should show and nothing comes back. I have also my Return table from the BAPI and nothing shows either.
    Please advice,
    Regards,
    Diego.

    Hi Amit,
    I do not have any WD. This is pure Adobe Interactive Form. I built the form using Adobe LiveCycle 7.1, created a Data connection to the BAPI wdlf file on backend system and then launched the adobe and clicked on the button to call the bapi.
    Do I still need AFC even though I do not use WD? I will give it a try.
    Kind Regards,
    Diego.

  • HT201376 Nothing happens when pressing Command+R during reboot

    I am trying to do a factory reset on my computer, and I have tried at least 30 times to restart and hold down the Command+R Keys and absolutely nothing happens.  I have tried during different intervals during the reboot, and have tried doing it after a shut down and startup.  Nothing happens at all. I have done it at least 15 times when the white screen with the apple pops up.  I have waited for the "wait" symbol to try it.  What am I missing?! Why won't this work? I cannot get to the point where I can erase everything.  When I go in manually through the disk utility, it will not let me erase this way.  Help!

    do I need that DVD? or can I upgrade to the newest version, would I then be able use the command R option for bringing up the disk utility partition?
    What exactly are you trying to do?
    OS X Lion and above includes the addition of a Recovery partition (not a "disk utility partition"). If you had OS X Lion or above, then Command-R would boot the Mac to the Recovery partition. From that partition, you could then run the Disk Utility application.
    With 10.6.8, you can boot from the DVD (Hold down the C key while restarting), once done, you could also run the Disk Utility application.
    Note: There is no way that we can tell whether you can upgrade from 10.6.8, since you haven't provided any specific information about your Mac other than it is a MacBook.

  • After installing 9.0.1 twice on Win7, Firefox does not open websites in the navigation toolbar. Nothing happens when I put in any normal web address.

    Firefox now takes an enormously long time to open now that I have upgraded to 9.0.1. The bigger problem is that the navigation toolbar where I enter web addresses does not function when I hit the enter key or by selecting the small arrow key right next to the web address. Win7 64bit, no detectable viruses.

    This issue can be caused by an extension that isn't working properly.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    You could try a SMC reset:
    http://support.apple.com/kb/HT3964
    If no change, do what Allan advises.
    Caio.

  • Compressor - nothing happens when I press submit

    I've just started using Compressor, I've been through the very useful tutorials which give a quick guide on encodeing files. Everything seems fine - uploading the file and dragging on the desired encoding but when I press 'submit' nothing happens, no matter how long I wait, the progress bar does not change and the time is always 'unknown. I am not doing it right? seems fairly simple. Any advice, I would be grateful for...

    Thank you for the response.  Nothing happens when I press the button or the space bar.  I have look in the Audio Hardware settings, and ensured that my speakers were selected.  I also tried using a headset and selecting it, same thing.  I get no audio at all.  I also am not able to record anything (not that I would want to until I could play back.)

  • I am trying to download icarly episodes and it does not go any further than clicking on buy season button. nothing happens when i click the button

    i am trying to download icarly episodes and it does not go any further than clicking on buy season button. nothing happens when i click the button?

    I would first try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • Nothing happens when I press space

    I just downloaded Audition CC 2014, I used to have the installed version.  I'm trying to get started, but after importing a wav file, I find that nothing happens when I press the space bar to start the playback.  What could the issue be?

    Thank you for the response.  Nothing happens when I press the button or the space bar.  I have look in the Audio Hardware settings, and ensured that my speakers were selected.  I also tried using a headset and selecting it, same thing.  I get no audio at all.  I also am not able to record anything (not that I would want to until I could play back.)

  • The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

    The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My play lists and songs on iTunes and on my iPhone won't play.  They are light grey instead of black and nothing happens when I click on the songs.  All of the songs were either from CD's or from iTunes that I purchased. I have home sharing turned on. Thi

    My play lists and songs on iTunes and on my iPhone won't play.  They are light grey instead of black and nothing happens when I click on the songs.  All of the songs were either from CD's or from iTunes that I purchased. I have home sharing turned on. This is a new issue.  It used to work fine.  I tried restarting my iPhone and syncing with iTunes. Neither worked.  Please help!

    Try delete those songs using iTunes by de-selecting and sync. After that mark those songs and sync again.

  • I am trying to finishing downloading a free app i just "agreed" to and it says DownloadNow but nothing happens when i press the OK button

    I am trying to finish downloading a free app.
    I already agrred to the terms.
    the next says Download Now but nothing happens when I press the OK button

    Hi helpcmo,
    Thanks for visiting Apple Support Communities.
    If your free app isn't downloading, first try restarting the iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Next, you may want to verify whether the issue is due to the iTunes Store connection:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If the behavior persists, try the remaining steps in our iPhone assistant:
    http://www.apple.com/support/iphone/assistant/phone/
    All the best,
    Jeremy

Maybe you are looking for