Nothing happens when pressing the adobe button to call BAPI

I have created adobe form using the Adobe LiveCycle 7.1 and everything looks fine; when I created the Data Connection the wsdl file was found, the BAPI was brought into the left hand side of the screen, I was able to drag and drop the fields I wanted and finally drag and drop the action Button to call the BAPI.
The problem I have is that when I launch the pdf file, fills out the fields and click on the button, NOTHING happens.
On my adobe I have 3 fields where the master data created by the BAPI should show and nothing comes back. I have also my Return table from the BAPI and nothing shows either.
Please advice,
Regards,
Diego.

Hi Amit,
I do not have any WD. This is pure Adobe Interactive Form. I built the form using Adobe LiveCycle 7.1, created a Data connection to the BAPI wdlf file on backend system and then launched the adobe and clicked on the button to call the bapi.
Do I still need AFC even though I do not use WD? I will give it a try.
Kind Regards,
Diego.

Similar Messages

Can't delete favorites from face time. Hit the edit button at top of list, but can not delete. The red circles appear next to contact , but nothing happens when touch the delete button???

Ok, new to this forum. I pad 2 FaceTime, new user.
Have list of favorites in the face time app, but when hit edit at top of list, red circles appear, but nothing happens when touch delete,
The delete red oval appears for fraction of second.
This has to be software issue???
Thx

Click the Home button
Then double click the home button again
Hold your finger on the Phone App until it wiggles
Click the minus button
Reopen the App and try again

HT1766 I have a pop up about Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Plea

I have a pop up about Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Please can e frozen and having tried to turn off I cannot slide to turn off. Please can you help

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Nothing happens when I push download button

When I try and download Digital Editions using download button, nothing happens. Any solutions?

Thank you for the help!
Date: Thu, 13 Aug 2009 16:45:59 -0600
From: [email protected]
To: [email protected]
Subject: Nothing happens when I push download button
I experienced the same thing on my Mac. I openned the downloads window in my browser. Selected the file I had just downloaded. pressed control + left click. Then selected show in finder. Finder openned with the download nnnn.acsm. I doubled clicked that file and it installed into my ebook reader.
>

Hear sound when press the home button, as if there is a gap underneath !!

Hear sound when press the home button, as if there is a gap underneath !!

Take it back to Apple if you think there's a problem with it.

Report is not starting an adobe window when pressing the print button

When ever I press the print button on my report and I get the box that asks you which page to print. I choose all and then press the ok button. Nothing happens when I press the ok button. I'm I missing something on the server that is running the application. It works locally but not on my test server.
Thank you

Well, in order to print using PDF, you must have adobe installed...
I understand that you have some CR Service Pack installed, but I am not sure which one. I'd recommend you download SP 5 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
And use the msm to install the runtime. The SP 5 msm is here;
https://smpdl.sap-ag.de/~sapidp/012002523100001088442009E/crxir2sp5_net_mm.zip
Re.; I was wondering I am missing something from the server that converts the report to pdf and shows it in the adobe viewer.
Not that I am aware of.
If SP 5 does not help, a question for you; can you print any pdf document (non CR) from adobe on that server?
Ludek

MAC: Premiere Pro won't play. Nothing happens when pressing spacebar, nor play button on timeline

Help!! Deadline looming! Nothing happens when I press play on any window or spacebar in Premiere Pro. The play button turns to stop and nothing else happens. I have also installed Premiere CS6 and everything works fine there.

Hi franciscobelda,
See if this help article works for you: http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html
Thanks,
Kevin

My iPhone 5 C doesn't respond when pressing the Home Button, do I need to go to a Apple store or is there another way to fix this problem?

I bought my iPhone 5 C last week and is still all brand new. My phone was alright thses days but suddendly when i pressed the Home button to get out of an app, it didn't respond and also when i want to see the time I press the Home button but it doesn't show the lock screen. Do I need to go to an Apple Store or is there another way to fix this problem? I have read the Helping Center in the Apple Web but still it didn't help to solve my problem. Can someone please help me?

Getting your notifications is definitely important and we understand not wanting to miss anything katieb373. You have reached the right place for assistance in getting this working for you again. Has your phone completed any recent software updates right before this happened? You can reset the network settings to see if that will resolve the issue by following the steps http://vz.to/1uO6qTU in the link. Please try this and let us know the results.
CandiceH_VZW
Follow us on Twitter at @VZWSupport

Bug when pressing the next button

After I upgraded to 8.0 when I press the next button the player stops and I have to press play again.

This is a simple solution, but this behavior also occurs if you happen to not have all the little boxes next to the songs checked. You can select all, and check them all with one fell swoop.

Loop stop when pressing the minimize button??

Hi,
I've made data-acquisition VI, when i run it and press "for example" the
minimize button of my VI it stops untill i release the minimize button, is
there anything to avoid this?? So that when i press the minimize button that
my vi just go's on with it's loops?
Best Regards,
Thijs

> I've made data-acquisition VI, when i run it and press "for example" the
> minimize button of my VI it stops untill i release the minimize button, is
> there anything to avoid this?? So that when i press the minimize button that
> my vi just go's on with it's loops?
>
As the other response indicated, we try to keep the loops running, but
certain things in windows consume the UI thread, meaning that LV can't
update the UI. You can make a simple VI that charts ten points per
second and see if when you release the mouse the chart catches up. The
standard way LV does execution tries to decouple the UI from the
execution, so that the diagram can continue even while the UI is stopped.
If this example works and your application doesn't, it is likely that
y
our I/O loop is interleaving UI and I/O. If the UI gets blocked for a
period of time, such as you describe, this is when the UI blocks the
rest of the loop. If this is the case, and this is important to you,
you can try to separate the UI from the I/O by moving then to two
independent loops that communicate via locals, etc.
Greg McKaskle

Mail freezes when press the attachment button

I first realized that my MailTab Pro for Gmail app would freeze for about 10 seconds when I press the paperclip button. So then thought it maybe had to do with a setting for mail. So I went throught the whole drama of setting up Mail (apple mail), and then tried pressing the attachment button on an email I tried to compose and that too would freeze up for 10 to 20 seconds. I cant even get to the screen to browse attachments. I can upload attachments no problem on safari or firefox in gmail. But through MailTab Pro it freezes. I have, however realized that I can drag and drop files into the mail app email that I am composing. But that is a frustrating way to browse files. Anyways, wasted my whole day trying to figure this out and was hoping somebody might know how to help me out. Would be really appreciated.
Cheers

Doesnt seem like anybody had any similar problems to me, but if you do have a similar issue even with apple mail or any imap attachment issues I figured out the solution.
This solution solved both my mail attachment problem as well as my cpu overheating issue as well. On this thread read the post from James Hunkins.
https://discussions.apple.com/thread/3396579?start=30&tstart=0

Nothing happens when pressing Play on any track

Description
Spotify looks to be working fine but when I select something to play nothing happens. The Pause Button is visible suggesting the song is playing but the progress bar for the song stays at 0:00. This happens if I try to play radio, select a specific song, everything. I tried the clean reinstall but this hasn’t resolved anything.
My Operating System
Windows 8.1
64 bit
Do you have a Service Pack installed?
I don’t think so
My Spotify version
0.9.6.72.ge389c074
My internet provider and country
Comcast US
Did you do a clean install of your current Windows version or did you upgrade from a previous version?
Upgraded from Windows 8
My username
1222110670

Not helpful. Just installed. Halfway through one playlist and it won't respond. B.S.

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

HT201376 Nothing happens when pressing Command+R during reboot

I am trying to do a factory reset on my computer, and I have tried at least 30 times to restart and hold down the Command+R Keys and absolutely nothing happens. I have tried during different intervals during the reboot, and have tried doing it after a shut down and startup. Nothing happens at all. I have done it at least 15 times when the white screen with the apple pops up. I have waited for the "wait" symbol to try it. What am I missing?! Why won't this work? I cannot get to the point where I can erase everything. When I go in manually through the disk utility, it will not let me erase this way. Help!

do I need that DVD? or can I upgrade to the newest version, would I then be able use the command R option for bringing up the disk utility partition?
What exactly are you trying to do?
OS X Lion and above includes the addition of a Recovery partition (not a "disk utility partition"). If you had OS X Lion or above, then Command-R would boot the Mac to the Recovery partition. From that partition, you could then run the Disk Utility application.
With 10.6.8, you can boot from the DVD (Hold down the C key while restarting), once done, you could also run the Disk Utility application.
Note: There is no way that we can tell whether you can upgrade from 10.6.8, since you haven't provided any specific information about your Mac other than it is a MacBook.

How to get current row value from table when press the submit button

Hi,
I want to get the current row value of SuccessionPlanId which is one of the column in a advanced table.
I created one button (created using personalization, action fired thru CO)in the table as column, so each row having one button, if i press the first row's button means then i want to fetch the first row's SuccessionPlanId and if it is 3rd means then i want to get the value of third row's value.
How to do it in controller extension?
Please reply soon, its urgent.
Thanks in advance,
SAN

Pratap,
Yes, I tried with 'delete' button which is seeded one.
For this, our code using row reference is working too fine. it throws exact SuccessionPlanId value of corresponding row.
I created MessageStyledText, but here i need to give text value right, then only it 'll appear in the page.
Instead i created one image and fired explicitly from the controller processRequest method.
But the same problem remains..
here my code:
public void processRequest(OAPageContext pageContext, OAWebBean webBean){
super.processRequest(pageContext, webBean);
OAButtonBean oabb = (OAButtonBean)webBean.findChildRecursive("XXSubmit");
FireAction action = new FireAction("XXSubmit");
oabb.setAttributeValue(UIConstants.PRIMARY_CLIENT_ACTION_ATTR, action);
OAImageBean oaib=(OAImageBean)webBean.findChildRecursive("XXSubmitImage");
oaib.setFireActionForSubmit("XXSubmitImage", null, null, true);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean){
if("XXSubmitImage".equals(pageContext.getParameter("event"))){
String succIdI="";
String rowRefI = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
if(rowRefI != null && !("".equalsIgnoreCase(rowRefI ))){
PerSuccPlanSearchVORowImpl rowI = (PerSuccPlanSearchVORowImpl)oaam.findRowByRef(rowRefI);
if(rowI != null)
succIdI=rowI.getAttribute("SuccessionPlanId").toString();
}else{
throw new OAException("Row is null");
throw new OAException(succIdI, OAException.INFORMATION);
}else{
super.processFormRequest(pageContext, webBean);
If i run the page using this controller, it throws exception without any value, because for 'succIdI' i initialized without any string.
Can you please suggest me how to solve?

Nothing happens when pressing the adobe button to call BAPI

Similar Messages

Maybe you are looking for