Nothing is displayed in System Overview.

Hi,
I have taken over a Solution Manager and will set up system monitoring. When selecting Solution Monitoring > System Monitoring no system overview is displayed. Only this text:
"Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable."
It looks like the system overview should be displayed in web, but that is not possible for the moment. EWAs are displayed, by the way. Also when selecting Alert Overview (button) a DEV system is displayed with a few alerts).
I assume there are some settings that are not correctly configured. Does anyone know more about this?
Thanks!
Best Regards,
Kjell Aarhus

OK

Similar Messages

  • Solution Monitoring System Overview

    There are non-production systems showing in the system overview in Solution Monitoring.  They are dev and QA systems that are in the logical component.  How do I removc them?

    Hello Jerry,
    Solution Monitoring overview just displays the the solutions and the number of systems rated green, yellow, red, etc for
    Earlywatch Reports, System Monitoring, Business Process Monitoring, and Open Tasks.
    As you can see Solution Monitoring is based on Solution, so whatever systems you have included in that solution will be included in the solution. The overview is an overview of the solutions in Solutin Monitoring. This is why it is called Solution Monitoring.
    If you are talking about System Monitoring, or BPM or EWA, etc, then if you don't want non-production systems included, then they should not be included in the solution, or the status of those systems in the solution should not be "Put in Solution".
    Perhaps you have not set up your solutions in the best way?
    Regards,
    Paul

  • System Overview hangs

    I have one macbook running ARD 3.4 client and OS X 10.5.8 that I can "Control" and "Observe" but when I try to collect the "System Overview" it just hangs. This function works well on all other computers (about 50 of them) but not on this one. I have checked all the settings under Sharing, etc. The System Overview task (with "all fields" and "rebuild data for report") status normally starts with "waiting" then "collecting report data" then "tranferring" and finally "successful" after which the report info is displayed. The process is usually done in about 20 seconds or less. On this problem macbook, it runs for a while and then comes back "offline" or just hangs at the "collecting report data" stage but I can still observe or control that laptop. What can I do to get the System Overview report to work?

    Hi,
    Pls Click the Personal Setting Tab in the ME21N/ME22N/ME23N screen..
    and Restrict the "Selection Period for My Docs" to 1 day or One Week and Check..
    Probably the Default right now is No Restrictions or One year...
    Thx
    Raju

  • Export System Overview - into a readable report?

    I run the "System Overview" report on a computer - and export the data.
    I can open it in Pages or Numbers - as an extremely long and "difficult to read" table.
    Does anyone have way of printing out this information in a legible format?
    Is there a template for Pages, Numbers of even Excel that will display this legibly?

    I'm afraid I'm not sure what you're going for. An ARD report is, by its nature, a laundry list of software settings or hardware properties, and their matching values. When dealing with small numbers of computers, I feel the lists are a bit 'prettier' in Excel after copying the filled cells, then doing a "Paste Special…" with the 'transpose' box checked ( I don't have Numbers ). If you have a specific goal 'look' in mind, perhaps we can help you get to it, but ARD's exported txt document, with its column headings and a row of data for each computer, is about the best I would expect it to output.
    Joel

  • I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

    I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4623 I found an update ios6 in my iphone settings and then I tapped on  install ,but it is going on and nothing is displaying .Only apple logo is displaying  frequently.It has been happening  for 13 hours.my question is how much time it will take to upd

    Can anybody help in my concern below
    I found an update ios6 in my iphone settings and then I tapped on  install ,but it is going on and nothing is displaying .Only apple logo is displaying  frequently.It has been happening  for 13 hours.my question is how much time it will take to update ios

    Read this: iOS 4: Updating your device to iOS 5 or later
    ... oh I think it is a 3gs or a 3
    This makes a difference. What does it say in Settings > General > About?

  • I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?

    I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?
    Actually I would like to have the Ipad connected to pc and then run an application on the ipad (which is shown on my windows machine) and record it on the windows machine... Is this feasible?

    If you have an HDMI connection on your computer, it is most likely an output, it won't recieve a signal unless it's on a video capture card. Recording to the PC could be a difficlut task. HDMI is encrypted to keep you from copying but there are ways to do it. It would also depend on what content you intended on recording. If it's movies you have purchased or rented, it would be illegal.

  • I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler.  I get the message "nothing to display"

    I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler.  I get the message "nothing to display" or "no region or audio file selected"  After much research on the web, I believe this is a permanent bug.  Does anyone have a good work-around for this type of work.  We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler.  Thanks in advance for your ideas!  Cheers.

    Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track.  I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project.  Thanks again.

  • I have an HP Designjet 1050C that displays a system error 04C400 00003E0A

    I have an HP Designjet 1050C that displays a system error 04C400 00003E0A and it will not allow me to print.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • No arrangements under display on system preference

    I have a mid 2012 macbook pro and there is no arrangements under my display on system preferences so I cannot connect a cord from my computer to the TV using HDMI cords.

    Let me try and sort this out. You have a regular MacBookPro and want to connect your TV via an HDMI cable to use as an external monitor.
    By default, a regular MBP only has a Thunderbolt port capable of driving an external monitor. You need to purchase a TB to HDMI adapter/dongle to go between the Mac and the TV. When you have that, as soon as you plug it in, the Mac will automatically detect the TV, usually evident cause the TV will start displaying something and the Mac will at least flicker, if not readjust its screen. You can then open System Preferences / Displays and make the necessary adjustments. Can have two modes of operation: Mirrored or not. Mirrored means the contents of the Mac's screen will be duplicated on the TV, non-mirrored means you have two separate and independent screens onto which you can open application windows.  You will probably have to fiddle with the screen resolutions, since most TVs don't have near the capabilities of the Mac's display.
    If you have a Retina Mac, all the above applies save the adapter/dongle part. The Retina already has an HDMI port on the right side so you just plug in the cable.

  • System Overview empty in solution monitoring screen

    Hi,
    I am in the process of setting up monitoring for R/3 system from Solution Manager. Defined all required entries in SMSY. In the section Solution Monitoring -> System Monitor/Administration, the system overview is showing empty.... I mean SID names are not showing. Any idea what could be wrong ?
    Thanks

    Hi Aravind,
    The only cause to this problem is your igs is not working and could be one more reason i.e you have not activated the services ( html, http,bsp and others ) in transaction SICF
    you try this way and to activate the services follow the instruction from SPRO
    Regards
    S.M.Ahmed
    Intelligroup Inc

  • Please provide an example of how to display the system time in CNiNumEdit.

    I need to display elapsed time in a numeric edit control. The value must be a double. Using MFC, please show me an example that displays the system time in a CNiNumEdit control.

    The trick is to set the FormatString of the num edit control to a format that displays dates/times and to use the COleDateTime class to handle converting the date/time to a double. COleDateTime encapsulates time stored as a DATE, which is a typedef for double. COleDateTime uses the same conversion factor for date/time as what the num edit expects, and since it supports a conversion operator to a DATE, which is really a double, and the num edit Value property is a double, displaying the current time in a num edit can be as simple as this:
    // Assuming you have a member variable called m_numEdit for a CNiNumEdit
    m_numEdit.FormatString = _T("hh:nn:ss");
    m_numEdit.Value = COleDateTime::GetCurrentTime();
    Hope this helps.
    - Elton

  • TEMPLATE.fmb: Custom form can't display any system message

    I was using the template.fmb to create a new custom form. It works fine, BUT it can't display any system message such as ""FRM-40400 Transaction complete: 1 record applied and saved"
    Please advise what's the problem.
    Thanks

    use something like this
    :System.Message_Level := '10';

  • Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

    Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

    Hi Prat,
    We are aware of this issue and are working on a fix.  In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
    Installation problems | Flash Player | Windows 
    Installation problems | Flash Player | Mac
    The installers are at the bottom of the page, in the 'Still having problems' section.
    Maria

  • The webpage is launching but nothing is displayed. It works fine when I use IE.

    When Ilaunch Firefox, nothing is displayed on the screen. When I launch IE, I am able to open webpages.

    Make sure that your firewall isn't blocking Firefox.
    * http://kb.mozillazine.org/Browser_will_not_start_up
    * http://kb.mozillazine.org/Error_loading_websites

Maybe you are looking for