Nothing is moving

Since I upgraded to Icloud nothing is moving even when I sync. Used to be when I added contact to my phone or Ipad it was on my mac, that was with mobile me. Since I upgraded to Icloud - can't even get stuff from my Iphone contacts to show up on my mac contacts. Pictures aren't automatically appearing in Iphone or my Ipad either.
I'm having trouble with my second .me address because heaven forbid Imail allow me to have more than one Icloud address and it won't let me take the second one off whatever cloud it's hovering on so it will actually work. ARGH. Any suggestions for making this transition that I did not want to make in the first place work?

Similar Messages

SUDDENLY NOTHING IS MOVING, SONGS WON'T DRAG INTO PLAYLISTS

I'M TRYING TO CREATE NEW PLAYLISTS AND SUDDENLY NOTHING IS MOVING. INDIVIDUAL SONGS DON'T MOVE, PLAYLISTS IN THEIR ENTIRETY DON'T MOVE. TRIED CREATING A NEW PLAYLIST FOLDER AND MOVING PLAYLISTS INTO THAT BUT NOTHING GOES. HAVE CHECK SOME SETTINGS BUT I'M AT A LOSE AS TO WHY THIS IS HAPPENING. HAVE THE LATEST VERSION OF ITUNES INSTALLED. ANY SUGGESTIONS???

Hi Lee113,
I see that you're having a similar issue to me - I download songs through a wi-fi network (wirless internet), and try to sync them to playlists.
Now that I see you have a similar issue, the answer may be a setting in iTunes,or maybe re-downloading these through your PC to see if you can then transfer these purchases to your playlists. I'm currently not at my home PC, but if you could experiment with that, it may help.
All downloads under your iTunes account should be able to be re-donloaded for free through your home PC so give it a shot, download the songs again and try and transfer them. Let me know how you get on.
nzjeff

I open a site, it loads and i'm already reading or looking at it and suddenly it turns into a blank page without me doing nothing or moving or clicking anywhere. Have happened to me on 3 different addresses

Hi.
I'm having a problem with Firefox. Lately it have happened to me that I'm looking at a site and suddenly the site turns into a white blank page and that happens without me doing anything or clicking anywhere. The site loads normally and I can navigate through the page but then all the content disappears and shows just a white page. At first I thought it was a problem with the address because that problem happened to me just in this one(http://www.ksl.com/index.php?nid=231&cat=144&category=142) while I was looking at the classifieds but today I was browsing other pages(e.g. www.collegeboard.org) and the same thing happened. And it doesn't happen on every site, so far is has been just in a couple of addresses. Then, in order to fix this, I have to click the "go back one page" button to get to the same page I was on. It looks like when it turns white is because it goes to a different page because if I reload that white page nothing happens until I click "go back". I hope you can help me.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Render files missing-after duplication and also after moving

I have to replace a drive, which is still working well, so i went ahead and tried to move libraries with all its content (Events,projects,reneder files), which doesnt exist as an option... as far as i was able to figure this out....
then i went ahead to move events, where as one in 5 was movable the others would only have copy as an option.
which strikes me as oddity already...
after this was done i compared the content of libraries between the 2 drives, and was in shock.
the render files were all missing, needless to state here, that i wil NOT re-render weeks of work again...LOL
so i went and googled this, and came to thousands of answers on how to move or copy events to a different location , but always on the same HD.
there was absolutely nothing about moving Libraries with the Events and Projects and render Files all together explained ,.... ANYWHERE!
is there anyone out there who knows how to do this, so the render files actually move over to a new HD and ,...of course,...are reconnected there propperly and usable?
manually moving these render folders will NOT reconnect them to the projects,.... just as a FYI ...
why is there no instructions in the FCPX help menu on moving " Everything "..??
but thousands of article on how to move only parts and pieces .....

using disk utility to do a clone of the old drive to a brandnew drive... would this have done the trick?
you know the restore to destination trick....
or would have these renderd files still not connect since the drive might have a unique manufacturer id number...
yes ...the new drive would have been called the very same as the old drive...
the old drive has a clicking noice so seagate replaced it...
and i am in a challenge to move all stuff over now...to the new drive...

All songs on networked folder "could not be found", though not moved

Last night my computer froze while iTunes was in the process of running the script "Put This In That".
This morning I rebooted my computer by having to hold down the power button and then restarting.
Ever since all this iTunes cannot find ANY of my 80GBs of music.
Here is my situation:
- MacBook Pro; iTunes database/xml file resides in it's default location in my music folder.
- Network Attached Storage device (a DNS-323) holds over 80 GB music in a folder named "iTunes 081102", all of which was being managed by iTunes just fine up til this morning. The "iTunes Music folder location" is set to point to "Volume_1:iTunes 081102:", which is the location of the above folder on the Network Attached Storage. This is the way it was set yesterday, and the way it is still set today.
When I try to play any song I get the standard message "The song... could not be used because the original file could not be found. Would you like to locate it?"
I actually tried to this once, hoping like some other software I use that it would use this as a guide to find everything else, but no such luck.
If I go to "Get Info" for a song and go the Summary tab, under "Where:" all it says is "Not available".
The thing is NOTHING HAS MOVED. Everything is in the EXACT SAME LOCATION as it's always been.
So how do I tell iTunes to "go fetch"?
Is this an issue because I'm using iTunes on a laptop, and for half of my day the files aren't available?
I don't want to reimport, because then I will loose all my ratings and meta-data.

Last night my computer froze while iTunes was in the process of running the script "Put This In That".
This morning I rebooted my computer by having to hold down the power button and then restarting.
Ever since all this iTunes cannot find ANY of my 80GBs of music.
Here is my situation:
- MacBook Pro; iTunes database/xml file resides in it's default location in my music folder.
- Network Attached Storage device (a DNS-323) holds over 80 GB music in a folder named "iTunes 081102", all of which was being managed by iTunes just fine up til this morning. The "iTunes Music folder location" is set to point to "Volume_1:iTunes 081102:", which is the location of the above folder on the Network Attached Storage. This is the way it was set yesterday, and the way it is still set today.
When I try to play any song I get the standard message "The song... could not be used because the original file could not be found. Would you like to locate it?"
I actually tried to this once, hoping like some other software I use that it would use this as a guide to find everything else, but no such luck.
If I go to "Get Info" for a song and go the Summary tab, under "Where:" all it says is "Not available".
The thing is NOTHING HAS MOVED. Everything is in the EXACT SAME LOCATION as it's always been.
So how do I tell iTunes to "go fetch"?
Is this an issue because I'm using iTunes on a laptop, and for half of my day the files aren't available?
I don't want to reimport, because then I will loose all my ratings and meta-data.

Moving folder on windows server: system password

At work I work on a mac, but our files are on shared windows network drives. There's one perticular drive which causes our mac users problems. It doesn't happen on all folders/files, but on some of them the following happens.
I try to move a folder to another location, but then suddenly my mac asks for the system password. I fill that in and press ok, but nothing is moved. The folder is still in the same location. This only happens om certain folders and the funny thing is: when I try it on of the following days, the problem for that folder is gone and I can move the folder to the folder I wanted it to move. But in the meantime there are other folders which can't be moved.
Support - being not into Mac strangely enough - says it's a Mac problem and I should update to 10.7. But that's not the sollution. Also because colleagues of mine who work in other office don't have this problem. It happens only to me and my colleagues at the place/office where I work. The windows server is at some place else so everything goes via internet.
I keep insisting it's some kind of permissions thingy. Support says it's a Mac thing. What can be the problem and how can I make it clear to them that is ISN"T a mac thing?

By the way, I noticed that with folder I can't move within a SMB share, those folders I also can't rename! I can move it's content but not the folder itself. Not on a Mac but also not on a Windows machine. I've created the folder on my Mac desktop myself. Then moved it to the SMB Share. Then I can't rename it and I can't move it. Have done this procedure several times and most of the time it works ok. But every now and then I stumble on a folder which wont move within the SMB share and in those cases I also can't rename the folder. The problem isn't that there is a file within open by me or someone else. It's like the SMB share seems to think there's some file open while there isn't. But that would be weird anyway, cause a folder can always be renamed even if a file in that folder would be open? Can someone shed some light into this problem? What could cause this bug? I know now it isn't my Mac's fault (which the windows fanboys of Support seem to think). As the folder can't be renamed/moved both on a Mac and a Windows machine. What could be the problem?

How do I undo the damage from Google Play?

I am not sure which forum to send this to. Please refer me to the correct forum if I cannot be helped here.
I used Google Play, a free cloud where I can store ITunes songs. I uploaded all 4500 songs over 4 days, but now my IMac is totally messed up!
I never had any problems until this Google Play.
I have an IMac and the operating system is Mac OS X 10.6.8 Snow Leopard. Everything was fine until I started using "Google Play" and it's Music Manager.
I used "Google Play" and sent (uploaded) all my 4500 ITunes songs to the cloud called Google Play. This took 4 days to upload, because Google Play is a very slow program. My IMac has been messed up since:
1) Everything now is super - super slow.
2) Cannot restart or shut down my iMac computer. Get a message that I must quit Safari first. But I can't quit safari because the quit safari option in the menu is always grayed out now. So the only way I can shut down or restart is to manually shut off the computer, (via the button in the back of the IMac) which may harm it. And when I click the button or switch in the back to turn the iMac back on, the problems and the trash dialogue boxes (see #3 below) remain the same. They do not go away.
3) cannot move anything to the trash. (I am trying to empty the cache in the library to speed up the computer.) I just get dozens of trash dialogue boxes that say "preparing to move to trash" but this goes on forever and nothing is moved to the trash. And I can't get rid of these dialogue boxes that say "preparing to move to trash". There are loads of them and they stay forever, even if I shut down the computer and turn it on again.
Some things I try to move to trash but I get a "copy" dialogue box with the message "Prepare to move to desktop" and that message goes on forever also.
Or it says "Preparing to move to "com.apple.AddressBook" but nothing happens.
(the last one - "com.apple.AddressBook"- is one I had tried to move to the trash).
Shutting off the computer does not help. These trash dialogue boxes are back when I turn on the computer.
4) Trying to speed up computer by going into Utilities (Finder/Go/Utilities) and then clicking on Disk Utility, then McIntosh HD, and then "verify disk". This is supposed to speed up the computer. But when I go into Utilities, the Utilities dialogue box is empty - there is no "Disk Utility" to click on. There is nothing in the dialogue box, except a small spinning circle in the bottom right of the dialogue box that looks like it is trying to do something, but nothing ever happens.
5) Can no longer save documents. If I try to save a new document (click file/save or save as) the new document does not show up in my documents folder.
Maybe the 4 days of uploading filled my IMac with all kinds of spyware and that messed things up. Who knows?
I do have Intego VirusBarrier 6, and have had that and their previous version VirusBarrier 5 for a few years. I ran a full scan yesterday and it found only one new virus besides the 2 I previously had and that were already in quarantine I put the new one in quarantine too.
Is there anything I can do?

If I use the Google box, then when I copy the text from Google, it's plain text? Is that correct?
I just used the EditText method and it worked. Thanks

Sync multiple devices - iPod Classic won't

My PC recently died and I purchased a MacBook Air. Over the last couple of weeks I've been working to get all my iTunes items over to the MBA and get things to sync on iTunes, upgrade my device software, and resume normal life...
This has not been as easy as I had hoped, but I have been able to get my iPhone 4 syncing with iTunes and upgraded successfully. I have about 1300 songs, tons of photos, and many music video files showing in my iTunes library and syncing to my iPhone. All is good there so far.
I also have a iPod Classic (80GB 2007 model, that's 5th Gen I think) that I have upgraded and attempted to sync, and a iPad 2 that I have not yet connected to my MBA.
The iPod is my current project. I connected it, and went through syncing to iTunes and the device is now empty. I have "sync all music" checked and nothing is moving over from iTunes to the iPod. I have tried syncing individual songs, artists and playlists with no luck. I even restored the device with no luck syncing it up.
In my iTunes account I see my iPhone 4, iPad 2 and MBA all listed as devices in my Cloud, but of course no iPod classic (what I would expect).
Any ideas how I can solve this sync issue with my iPod classic? How can I avoid the same problems when I connect my iPad 2 and attempt to upgrade and sync to iTunes?

HELP...I have a similar issue. Worried that my music is up in the cloud and if I try to sync to my iPod Classic I will lose the music on it and be unsuccessful adding new music to it. Can someone help us with this? I use my Classic with old Apple speakers for everyday music in the house. Using all up to date OS software.

How do I move my movies from iTunes to a portable drive in oder to free up disk space?

I have less than 10% of disk space free and often receive a message that my strat up disk is nearly full. I therefore want to free up space by moving my movies to a portable drive. How? I want to keep the movies on my iPad, though.

Patti23 wrote:
How do I move purchased movies from itunes to the icloud?
Delete them from the local computer. Nothing gets moved. If the content was purchased from iTunes it should be available for download again in the future.
Patti23 wrote:
I want to keep them on the ipad they have been moved to.
If the device is synced with iTunes on the computer and the content is deleted from iTunes it will also be removed from the device.
Realistically, if you want to keep the content, keep it stored locally. Purchase an external drive to store the content on. Keep in mind that iOS devices are NOT backup devices, they merely mirror the content in the iTunes library on the computer.

Is there a way of importing projects in imovie 11?

hello today me and my cousins made a star wars film and trailer i shared the projects and they disappeared from imovie and were sat on my desktop!
IS THERE A WAY TO PUT IT BACK IN IMOVIE!
please help my cousins be annoyed that we can't put stuff on the project

On your internal drive, iMovie projects are located in your User (Home)>Movies>iMovie Projects folder.
On an external drive they are located at the top (root) level of the drive in the folder iMovie Projects.
Similarly, iMovie Events are located in a folder named iMovie Events in the corresponding locations for each disk.
Close iMovie, then drag the two projects from the Desktop to the appropriate iMovie Projects folder. When iMovie is next opened, it should recognise the two projects (they should appear in the Project Library where the projects are listed).
It's difficult to understand how the projects ended up on the Desktop. Normally, iMovie places exported (shared) projects in the location you nominate, or when sharing to the Media Browser the exported file is placed in the project's package contents folder - post back if you need more information on this. Nothing is moved from the iMovie Projects folder when iMovie performs the export.
John

Scheduling a BI job chain in Redwood

The problem I am having is we are trying to schedule a BI job chain via Redwood software and are not getting any response. Within Redwood, I have executed these jobs IMPORT_BW_CHAINS, IMPORT_BW_CHAIN_DEFINITION, IMPORT_BW_INFOPACKAGES using BI job chain 0fcsm_cm_10 which is defined in BI as a job chain. These jobs run to completion but nothing is moved into Redwood to schedule as you would see from a import of a CCMS job. When I run job RUN_BW_CHAIN using the same BI job chain ID I receive the below error. Not sure what Im missing or doing with the process to get to schedule the BI job chains with Redwood.
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "RSI.RSIEXEC", line 1638
ORA-06512: at "RSI.RSIEXEC", line 1759
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 21
ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 80
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_SYS_SQL", line 1200
ORA-06512: at "SYS.DBMS_SQL", line 323
ORA-06512: at "SYSJCS.DDL", line 1085
ORA-06512: at "SYSJCS.DDL", line 1118
ORA-06512: at "SYSJCS.DDL", line 1177
ORA-06512: at line 3
JCS-00215: in statement RSOJ_EXECUTE_JOB

I am also seeing the same issue
anton the last information you requested
The following products are installed in the Cronacle repository:
Product                                  Version    Status
Cronacle for SAP solutions               7.0.3      Production
Cronacle Forecast Module                 7.0.3      Production
Cronacle Reports Module                  7.0.3      Production
Cronacle &module Module                  7.0.2      development
Cronacle Mail Module                     7.0.3      Production
Cronacle Audit Module                    7.0.2 r2.2 Production
Cronacle Process Manager for Web         7.0.3      Production
Cronacle Module Installer                7.0.3      Production
Cronacle Repository                      7.0.3.34   Production
Cronacle Monitor Module                  7.0.3      Production

How do I transfer and address book from a samsung a920 to my blackberry curve?

I got the bluetooth to pair up and it gives me the option to transfer my address book...and it even says it does transfer it....but nothing got moved over....anyone have a clue?

Can you sync that phone with Outlook? If so, do that and then plug in the BB and transfer the Outlook Addresses to the BB....also, I know that the Y ahoo 3.0 program will sync the addresses, so use that with the samsung, load it onto the BB and transfer that way.
Check out pinstack.com!

Apparently I don't understand a feature correctly in Mac mail version 6.6

I am a little confused about what the difference is between a new mailbox and a new smart mailbox in mail. I wanted to create one folder that I can put all my mail into so that I can use my inbox as a sort of a "tickler file". I created a new "mailbox" from the little plus sign at the bottom left of the screen and chose "on my mac" and named it "archive". I moved every email from my inboxes (from multiple email accounts) into this. Was this the correct way to accomplish my goal?
Unfortunately I felt uncomfortable about this action and then became confused and tried to undo what I had done by moving them back to the inbox so that I could delete the "archive" "mailbox" I had created. I didn't feel like I had accomplished my goal correctly because I don't understand how this new system of "mailboxes and smart mailboxes" fully works and why there are not just simple folders anymore! I deleted the archive mailbox I had created and it apparently deleted ALL of my emails from off of my mac for only one of my email accounts! What is going on!? I just want to simply be able to organize my email workflow with one simple folder. I don't want to set permissions for this folder or anything. Can someone PLEASE help me understand what the heck I've done wrong and how I can get my emails back into mail from my server?
Thank you!

Your original action is alright but maybe not what you wanted.
A mailbox is a physical thing (a folder) you can add locally to your mac. You can move emails into it and they will leave the IMAP folder they were in and reside on your mac. What's left on the server is your "tickler" file.
Alternatively, you could create an IMAP mailbox called archive and put mail there. Then the mail would still be on the server but in the archive folder. The easiest way to remember this is "An IMAP mailbox on your mac is a copy/cache/clone of the same mailbox on the server" that is why you can see it on all your devices and a change on one means a change to all. If you want access to this "archive" from all your devices, then it needs to be a server IMAP mailbox.
A smart mailbox is really just a filter. It's like a saved search. Mail that meets the search criteria shows up in the smart mailbox. Nothing is moved.

How long does it take for Logic Pro 8 to load on your system?

Hi I just spent a few hours installing Logic on a new laptop and started freaking out because Logic Pro 8 wouldn't load. After I click the application the screen pops up I see it's loading, then the templates appear and I choose one... after that - that's it, nothing's moving I am just staring at the screen, when I nervously opened the Force Quit screen to check status I see it not responding so I closed it from there.
So I tried a few times over and in fact was going to stop the post there but then during last time when I didn't do force quit as I was tying this message Logic Pro opened up with the template ready to go.
So I tried it a few times while always monitoring the status on force quit window. And it seems to be going on the same pattern. Assuming I have a file saved so it doesn't give me templates, ok, after I click Logic Pro I see a freed loading screen with files running then everything disappears for about a minute. During that time if I look in the force quit window it shows Logic Pro as not responding then you can see it goes back and it starts fullscreen and everything is ok.
Meanwhile none of the other apps have that problem, Soundtrack and Waveburner all start up right away.
So I am wondering if anyone else has these slow startup. I don't know, I did download almost all sound DVDs excluding two jam packs, in case it matters, in case that's what takes so long to load.

Nickiz wrote:
There's something wrong with 10.5.2 and Logic 8.0.1....The problem is not to start the program, the problem is to open a project. It takes much longer time then before. It doesn't matter if it's a big project with lot's of audio and instruments or if it's a empty project. I have the same problem on three computers. What is the problem?
Nickiz
Follow komkommer instructions on this link. I suffer the same problem after 5.2. after erasing fonts damaged all is fine and logic opens very fast.. 8 or 10 seconds on macbookpro 2.33
http://discussions.apple.com/thread.jspa?messageID=6700586#6700586

Why does deleted content reappear on my iPhone when I connect via USB?

I recently upgraded from a 3GS to a 4S, and I'm having an issue that's never been a problem before. I notice that music or video that I delete from my iPhone reappears when I connect to iTunes via USB. Nothing is moved over, either: the videos are just listed as if never removed.
I am deleting this videos by swiping across after viewing on phone. They disappear, so I am not overlooking anything on that front. Similarly, I don't sync video or music -- I have manual management checked in iTunes.
Any ideas what might be happening, and how I can fix it?

And almost 2 years later this is still happening - I delete TV Shows and Movies from my iPad 2 (iOS6) or iPhone (iOS6) and as soon as I connect the devices to my mac by USB they reappear (even though my setting is to manually manage everything). This then screws up syncing like this morning where I tried to add 2 new movies - as it was syncing I realised that the previous 2 had reappeared so I wouldn't have space to add them. I deleted them via iTunes and the sync appeared to be successful - until I turned on the iPad on the train to be greeted by a message saying that the 2 items couldn't be synced.

Nothing is moving

Similar Messages

Maybe you are looking for