Nothing is working ri

I bought a sound blaster audigy SE, and the front 2 speakers are the only thing that played music even though when i click test the voice went through each speaker, and updated it and now when i select 5. nothing happens the picture that i gives only has 2 speakers left channel right channel. what to do? should i use splits?

I figured it out nvm

Similar Messages

  • Since updating to I.O.S7 on my ipad2 all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all?

    all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
    What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resetting

    Please see: http://support.apple.com/kb/HT1808 for further info.  It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
    Regards,
    Steve

  • When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find on the internet but nothing is working. Any other suggestions?

    When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?

    If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
    Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only.

  • HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

    I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

    Hi Novagurl2369!
    I have an article for you that can provide some helpful troubleshooting steps to address your issue:
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I've tried everything to get my phone out of recovery mode but nothing is working.

    Hi,
    I recently started updating my phone to I.O.S 8.1.3, and it was downloading and updating fine, then it said it had an error updating. I turned it off and on again to see if that would work, and when I clicked install it showed up as if it was turning off. It then showed up that I needed to connect to iTunes. So I did, and it said it was in recovery mode, and that I needed to restore. So I tried that and it said multiple times, when I got part way through the restoration, that the network had timed out when it hadn't. So I researched ways to get it out of the recovery mode.
    I've tried:
    holding down home and lock button
    holding down lock and volume button
    downloading tinyumbrella, however it wouldn't let me open it
    Putting it into DFU mode and restoring
    Nothing is working! I don't know what to do, I need my phone for when I'm travelling and now I don't have one.
    Anyone got any more ideas? I'll be incredibly grateful.
    If I can't get this to work I've wasted £200 of money on a phone that decides it's logical to kill itself. I won't be doing that again.

    I was trying to download TinyUmbrella because some people have said it basically kicks phones out of recovery mode, and I did try that but it hadn't worked, it kept loosing connection with the phone even though it was connected.
    I took the phone to the O2 shop and they did something to restore it, so it's working fine finally thanks for replying!

  • TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

    Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

    Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My itunes has stopped playing music. I have unintalled all apple apps and reinstalled and updated but nothing has worked. What can I do to fix this?

    My itunes has stopped playing music. I recently downloaded more music and now it has stopped playing, it says it is playing but there is no sound and the time bar does not move from 0. I have uninstalled all apple apps on my laptop and reinstalled and then updated the software. I have tried 'repair' aswell but nothing has worked.

    Songs in the itunes store are also not working

  • TS5376 iTunes wont install.  It says " The program can't start because MediaAccessibility.dll is missing from your computer.  Try reinstalling the program to fix this problem."  I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.

    iTunes wont install.  It says "The program can't start because MediaAccessibility.dll is missing from your computer.  Try reinstalling the program to fix this problem."  I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.  Help!!!!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • When I start my computer, I get popup error msg that "Apple Sync Notifier" has stopped working.  I have tried several remedies suggested by those on the Apple (and Roxio) tech support. Nothing has worked. Trying to burn disc or puchased ITUNES.

    I have been trying to burn newly purchased (as well as last year purchases) ITunes to a disc.   I had burned some of these songs to a disc last year and all went well.   Now I have been getting this popup telling me that the AppleSync Notifier has stoped working & the corefoundation.dll needs to be re-installed.  Also that Windows will try to fix the problem.   Every time I try to burn the disc, the computer sends the disc back out and the screen tells me to put in a blank recordable disc.   I have tried 4 different new discs now and the same thing happens.
    I am running Windows Vista.
    Have been to the Roxio web site for help as well as Apple.
    Have tried many "fixes" such as:  updating latest version of Direct X from the Microsoft website;   Disabling startup items;   going to local disc C and into the Apple/Apple Appplication support and right-clicking on the SQLite3.dll and moving it tomobile support device window.   Nothing has worked.  What can I do to get some music recorder?   Should I buy a new cassette deck and record onto tape like I did 20 years ago?   This is a very important disc I am making as a gift & I need to get it done by this weekend.    Is there anyone that can offer good advice?

    love paying a lot of money for something that doesn't work right, thanks apple

  • I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section.  How do I get there, nothing is working.

    I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section.  How do I get there, nothing is working.

    The Wi-Fi connections section is in Settings > Wi-Fi
    If the home screen is not visible tap the Home button, the button on the front of your iPad that has the rounded square in it. Once you reach the Home screen swipe through the screen of apps until you find the Settings app. Tap Settings and go to Wi-Fi.
    If your iPad is completely non responsive, try a restart.
    Press and hold the Home button and the Sleep button simultaneously ignoring the red slider. Keep holding until the Aple logo appears and your iPad will restart.
    The sleep button is on the side of your iPad on the side opposite from the Home button.

  • My iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password.  I have tried everything.  I even changed the password, nothing is working.  Both are 4G, my ipad is an Air and my phone is a Iphon

    I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password.  I have tried everything.  I even changed the password, nothing is working.  Both are 4G, my ipad is an Air and my phone is a Iphone 5.  I can get connected to other wifi on these features but not with my jetpack.  Please help, I need to use this feature soon.  Thank you so much

    Chances are you mis-typed a character in the Wifi password and the devices saved that information.  Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection.  Tell your devices to forget the wireless connection and start over.
    Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

  • My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. I don't want to restore everything just my Pages documents.

    How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. Everything I can find is about wiping everything out and restoring everything. I don't want to restore everything just my Pages documents (and numbers and keynote that also locked up during updating).

    What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
    Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
    iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
    If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

  • Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • Files copied (backed up) on an external hard drive can NOT be opened

    MacBook Pro (2.5GHz, intel Core i5) OS X Yosemite, 10.10.2 I was running low on storage space on my Mac Pro. I copied all items on Desktop to my external hard drive. After all files were copied from MacBook Pro to the external hard drive, "get info"

  • EC-PCA: Different assessment rules by materials

    One of objective of our PCA implementation is to split values by brands. It is possible with the use of profit center (PC) assignment in material master. But... We have some materials which can't be unambiguously assigned to PC. I.e. when one materia

  • Does JDeveloper 10g's "rich BPEL design time" work on Solaris 9?

    I know JDeveloper runs on Solaris, but does the BPEL designer (part of JDeveloper) run on Solaris? We are currently assessing migration effort from version 2.1.2 to 10.1.2 and it would be much easier to get an answer from someone who already knows ve

  • Unable to locate Live Office in Business Objects Enterprise XI3.1 download

    We recently downloaded Business Objects Enterprise XI 3.1 and plan to upgrade soon. I have been unable to locate the Live Office files. I looked in the collaterals folder. Any response would be appreciated. Thanks, Mike

  • How to Retrieve data from Variant Table

    Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?