Nothing mounts when connecting to server

We just installed a new MAC OSX Server at our office. I was able to connect once via the 192...address. Now when I try to connect, it allows me to type in my password and displays the list of volumes to mount. When I click them and hit ok, nothing happens, not even an error message. Usually the volumes would show up on my desktop. All other people in the office can connect, both macs and pc's. I have tried rebooting my machine and deleting it from the keychain. No new software has been installed. Any ideas at all would be greatly appreciated.

Wow, that is one cryptic error message. It sure sounds as if your version of AFP_VFS doesn't match that of the server. Or at least when it tried to reconnect? I wish I could tell you what it meant. One possible cause is a bad network connection. A flaky ethernet cable might get you that result.
Another thing to do is to try by hand, run /Applications/Utilities/Terminal and enter
$ mkdir /Volumes/test
$ mount_afp "afp://user:pass@server/share/" /Volumes/test
where the string "afp://user:pass@server/share/" should match whatever it is you use for a url to connect. With any luck, you'll get more verbose error messages, and perhaps they'll be meaningful this time. You may wind up with AppleCare on this one, but at least you should have something useful to report. Or maybe we'll see what to do. That "Wrong version" part sounds pretty serious, though. I just wish it had said what that wrong version was!

Similar Messages

  • When connecting to server the other computers will not mount on the desktop

    Hello
    I have three computers connected wireless and ethernet. When connecting to the imac and mac pro with my macbook pro the other computers will not mount on the desktop. I have never had a problem like this before.
    The imac and mac pro will mount the laptop or imac and the imac will mount the mac pro and laptop.
    When I connect to the server with the laptop I can access everything thru the shared folders but nothing will mount on the laptop desktop using the, connect to server.
    External HD connected with firewire will mount and the internal cd/dvd will mount.
    I have ran permissions repair on the laptop. Have I accidently changed some configuration I am not aware of?
    Any help or advice is greatly appreciated
    Thank You
    Dick

    Dick,
    I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
    If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
    hope that helps,
    Weston

  • Too many sharepoints when connecting to server

    I have a 10.5.8 Tiger server. I am upgrading to the new Lion Server. I have setup the server, created users and groups and setup Sharepoints using the Server App. The problem is I have several sharepoints specific to certain groups. In Tiger the user would mount the server from GO/Connect to Server.
    There would be only one volume or sharepoint available. Once mounted they would only have access to the directories/sharepoints for their group. The
    other directories would be locked. This is still the case with Lion once they mount the main volume.
    However the difference in Lion I am trying to figure out is ALL the sharepoints I have created show up in the list of the mounted server when connecting through GO/Connect to Server. Even the sharepoints a certain user does not have access to. When they try and mount the shrepoint they do not have access to they are given a message that they do not have access to this sharepoint. How can I hide those sharepoints from showing up in the mount window? In Tiger I have the same amount of sharepoints but only one volumes shows up for the users to mount.

    Dick,
    I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
    If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
    hope that helps,
    Weston

  • Finder error -36 when connecting to server - smbclient in terminal works

    Finder > Go > Connect to Server
    When ever I need to connect to a smb server using Finder, I get the constant error -36.
    In console :
    mount_smbfs: session setup phase failed: syserr = Socket is not connected
    mount_smbfs: could not login to server EXIT15: syserr = Socket is not connected
    mount_smbfs: 2 failures to open smb device: syserr = Resource busy
    mount_smbfs: session setup phase failed: syserr = Authentication error
    mount_smbfs: error from NetrShareEnum call: exception = 382312500
    I can sometimes select the share to mount, and it tries for a few seconds, never succeeds.
    10.4.10, but this was also case previously. We have every single Mac with this symptom so it is 7 work units at the moment, a Mac Pro, MacBook Pros, MacBook, Mac mini.
    Wired, wireless, and even VPN, no matter how the mac is connected to the net.
    Every non-Mac server at work tested gives this error when trying to connect to their shares.
    smbclient in terminal works.
    http://www.macwindows.com/tiger.html and Apple kbase article 301580 suggestions for nsmb.conf didn't make any difference. (the nsmb noauth being a very poor choice if it would work)
    smb.conf and nsmb.conf any security settings don't make any difference.
    I have working details for connection, so share, ip and dns name, username and password for connection work.
    Connecting from Terminal works.
    Connecting from any Windows or Linux virtual machine on Fusion on these same Macs work too.
    I have changed the workgroup to the correct one in Directory Access.
    I have tried all connection syntaxes suggested in http://www.macwindows.com/tiger.html - none of them still work in Finder, always identical results.
    smbclient //dns-name-or-ip/sharename -W workgroup -U username
    is the only viable workaround at the moment.
    Domain=[dnsnameofwhereconnected] OS=[EMC-SNAS:T5.4.21.400] Server=[NT1]
    is what smbclient gives for server details when its connected.
    As smb works from command line, it's not smb itself that is affected. Just Finder.
    I don't have access to edit any settings on the servers that we need to connect to. Only sharename and password that work for connection, but don't allow any editing on the server's settings.
    Ideas? This should work in Finder.
    Smbclient and Fusion area already somewhat workarounds, so I'm not looking for any third party software for dealing with this.
    I spent way too much time with AppleCare on this, and all I got was 90 minutes wasted.
    Ideas anyone???

    I think I have found what caused it. Not solved, but at least this seems so far the most likely cause:
    The share name contains hyphen.
    http://docs.info.apple.com/article.html?artnum=106471 Mac OS X 10.1 or later: How to Connect to Windows File Sharing (SMB) : Date Modified: August 01, 2007
    “6. You cannot connect to a share with a name that contains a hyphen. Resolve the issue by giving the share a name that does not contain a hyphen.”
    smbclient in Terminal is not limited to this "feature" of Finder of Mac OS X 10.1 that was not fixed or recoded to solve it or modify it since adding smb in it in 2001.
    It's not possible to test this changing the share name to one that does not contain a hyphen, nor to have one added in this server.
    For users that won't have Terminal access, the solution are .. remote desktop with admin user, have admin user come to mount the share in location, or use virtualization software and with it anything that works.
    Probably too optimistic to think the smb parts would have been rewritten for 10.5.

  • Nothing happens when connect iTouch to mac - is the cable already dead?

    Last week when I connected my (4 week old) touch to the right-side usb port, nothing happened, but then it connected fine to the left-sided port; bit funny I thought, but got on with my syncing etc. Today, nothing happens when I connect on either side. Do I have a problem with the USB cable?
    Thanks in advance for any help...

    Macs can get USB errors just like any other computer. Try restarting or shutting down and restarting and then try syncing again.

  • Nothing happens when connecting iPod to the computer

    I have also upgraded to iTunes 5.0, and now nothing happens when I try to connect my iPod to the computer. iTunes works fine; I can play music in iTunes, and no error messages. But my iPod doesn't show.... Any suggestions how I can solve this? Please?

    hi Jane!
    okay, here's another couple of troubleshooting documents:
    http://docs.info.apple.com/article.html?artnum=61711
    http://docs.info.apple.com/article.html?artnum=93499
    ... but if you're still having trouble after this, it would be a good idea to post over in one of the "Connecting your ipod" forums, so we can get you some concentrated attention on your situation from the connection gurus.
    it would help give context if you provided a reference link back to this thread. there's instructions on how to do that given here:
    sysop, "Stylize Your Posts (The Editor)", 09:41am Aug 4, 2000 CDT
    keep us posted on your progress.
    love, b

  • Problem when connecting sql server 2005 using SQL developer

    Hi,
    I installed Sql developer and I am trying to connect sql server 2005 using windows authentication. I had previously the SSO folder problem saying the path is missing in java.library.path. I copied the SSO folder into Sqldeveloper directory. I changed the settings under computer management->services and applications->sql server configuration manager->sql server 2005 network configuration ->protocols for sqlexpress->I enabled TCP/IP.
    Now I am getting an error saying "Failure-can not open user default database.Login Failed. Login failed for user ...".
    I am able to connect thru ODBC driver using windows authentication.
    Any help on this is highly appreciated.
    Thanks in advance,
    Lakshmi

    Hi Martin,
    Your solution has solved my problem too. Thanks for posting these workaround fixes :-)
    However, there seem to be a problem with datetime fields. The query:
    select getdate()
    returns something like: oracle.datetimestamp.@1aed4
    Is there a way to get around with this? Otherwise, using SQL Developer as a client for SQL Server doesn't serve the right purpose when we cannot access simple date fields :-)

  • ICloud always finds error when connecting to server

    When trying to open ICloud on my PC regarding my IPhone, a message comes up stating that an error occured when connecting to the server. I start fresh and I receive the same error. Any suggestions?

    This is strange as i am not able to login in to icloud with my [email protected] but i am able to login with [email protected] Which is the same to this account

  • Permissions Trouble when Connected to Server

    Setup: iMac G3 running Server 10.3.9 (file sharing services only); Powerbook G4 running Client 10.3.9; connection to server via Airport.
    Problem: When logged on to a sharepoint on the server using my user profile name and password, I have read only permissions despite the fact that the server is configured to include my user profile in a group with full read-write permissions.
    I have created a new alternate user profile on my Powerbook and from there have successfully logged on to the server using my original user profile name and password with full read-write priveledges.
    Also, I do not have this problem when logging on from another client machine in the office.
    Question: Are there steps I can take to restore my original user profile on my Powerbook so that I may successfully log in to my server with full read-write priveledges?
    Thank you for your attention.
    Sincerely,
    Mark
    P.S. I had started a thread under this subject heading within the discussion group "Mac OS X 10.3 > Using Mac OS X," before being referred to this discussion group. You may want to review that thread.

    I gather from the relative silence that the solution to my problem is not known.
    Let me pose a new question. Since I am able to create a new user profile on my Powerbook G4 and log on to the server as "Mark" with full read-write priviledges, is there a simple way to move all of my files, preferences and mail account information from one profile to another? If so, would I need to migrate the data twice -- once to the new alternate profile, and a second time to a newly recreated "Mark" profile?
    Of course I'm still open to a simpler solution if one is known.
    Sincerely,
    Mark

  • Finder Relaunch when connecting to server

    Hello. I was wondering if anyone had some insight to why my finder relaunches when I GO>>>Connect to Server. I am connecting to an external network drive that is working fine with all other workstations. Thanks

    Hi there,
    That's a strange one I've not seen before, but try dragging this file to the Desktop, Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more....
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist

  • Trouble deleting name/password when connecting to server

    I teach in a computer lab populated with 10.3.9 eMacs. I have students log onto a server (10.2.8) to store their files. One kid has managed to save his server connection login name and password so that it comes up as the default. Not a good idea with other students using the same computer and are thus able to access his file folder. I've tried emptying every cache and preference file that looks to be related to the connect to server screen to no avail. Clicking the Options button and unchecking/checking options did not change his name and password from appearing automatically either. There has to be a way to undo this, but I'm at the end of my progress bar. Any suggestions? Thank you.

    Do your users use Exchange?  If so, they can log into OWA and change the password from there.
    Do you have a Mac server kicking around?  If so, you can bind it to the domain, set up an AFP share that the users can access, and then they can change password from the connect to server dialog as shown below:
    Note that AFP provides a Change Password... button.  Clicking it...
    Allows you to change a password.  This server in bound to AD and the jadams users is an AD account.
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • Error when Connecting to Server

    Hi All,
                I am very new to Power-BI. I when I try to connect to Sql server using Power-Pivot I am facing the below error .Can any one help me how can I solve this
    Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .

    It looks like a bug. Make sure that you apply the latest service pack with cumulative updates, if any.
    If nothing works out, log a call with Microsoft Support :-)
    -Prashanth

  • Long hangs when connecting to server

    This has been a long-standing annoyance...
    We have an Xserve with 10.5 in the office.
    When I click on the "Network" icon in the sidebar on my Mac, it almost
    instantly displays a list of all machines on the nework.
    I then double click the Xserve's icon and the wait begins: first the
    beach ball followed after a while by a message window "Looking up
    server.local...".
    That continues for more than a whole minute until I'm prompted for my
    password (it's stored in the keychain) and finally a window pops up
    listing all the available shared folders/volumes on the server.
    Double-clicking any of them mounts it immediately on my Mac.
    Now I keep aliases for the volumes I need to mount regularly. One of
    them connects with only a short delay of around 15 secs and no password
    prompts.
    However a new alias I created today takes *several minutes* to mount the
    respective volume and that just doesn't seem right.
    What could possible cause these varied delays?
    Why does it do the "looking up" thing if the server can be seen in the
    network pane?
    Martin

    That's consistent with a DNS error and DNS timeouts (or maybe network or routing errors), and the use of the .local mDNS Bonjour domain implies no DNS is configured, and Mac OS X Server expects to have DNS. Put another way, set up DNS services, and get out of the .local domain. [Here's an explanation of configuring DNS services|http://labs.hoffmanlabs.com/node/1436]

  • Page not found when connecting to server (if not logged in on server)

    Hi,
    When we try to connect to the presentation server (http://esddev02:9704/analytics/saw.dll?Dashboard) we get a page not found error if I don't open a remote desktop connection session on the server first.
    I suppose the problem originates in the fact that the installation of the software has been done with my credentials on the server.
    The windows services start with 'Local System' as logon but the OC4J seems to start only when I log on with my user.
    I don't see a reason for this as in the registry the OC4J start command is found under HKEY_LOCAL_MACHINE.
    Changing this to "D:\OracleBI\oc4j_bi\bin\oc4j.cmd -start& " did not change anything.
    Has somebody got a clue?
    Tx for any advice,
    Kris

    Hi,
    I checked further on this today. Problem is not solved yet. I need to find a way to start the OC4J server independent from my session on the server.
    Has anybody got some advice?
    Brgrds,
    Kris

  • Finder crashes when connecting to server (10.9.4)

    I have been having an issue with my Mac Mini the last few days when it tries to connect to my local server.
    The first few times I can access the server normally through Finder, but after a few goes Finder freezes (spinning beach ball on finder - other apps work ok) up completely and needs to be restarted. Once it has restarted and I re-open Finder, it freezes up again completely until I restart my computer. The same applies when I try to access the server from other apps (eg. when adding a photo from the server to something in Chrome).
    I have reset PRAM, verified/repaired disk, run CCleaner.
    Any solutions to this issue?
    Mac Mini mid-2011
    Processor  2.5 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
    Running 10.9.4

    Sorry...
    tcp:
        61269 packets sent
            14501 data packets (5423429 bytes)
            457 data packets (298568 bytes) retransmitted
            0 resends initiated by MTU discovery
            34229 ack-only packets (284 delayed)
            0 URG only packets
            0 window probe packets
            8915 window update packets
            3181 control packets
            0 data packets sent after flow control
            0 checksummed in software
                0 segments (0 bytes) over IPv4
                0 segments (0 bytes) over IPv6
        66665 packets received
            15538 acks (for 5408457 bytes)
            1286 duplicate acks
            0 acks for unsent data
            46049 packets (49418889 bytes) received in-sequence
            233 completely duplicate packets (175429 bytes)
            0 old duplicate packets
            1 packet with some dup. data (996 bytes duped)
            6329 out-of-order packets (8815198 bytes)
            0 packets (0 bytes) of data after window
            0 window probes
            70 window update packets
            166 packets received after close
            0 bad resets
            0 discarded for bad checksums
            0 checksummed in software
                0 segments (0 bytes) over IPv4
                0 segments (0 bytes) over IPv6
            0 discarded for bad header offset fields
            0 discarded because packet too short
        1604 connection requests
        50 connection accepts
        0 bad connection attempts
        0 listen queue overflows
        1622 connections established (including accepts)
        1613 connections closed (including 48 drops)
            37 connections updated cached RTT on close
            37 connections updated cached RTT variance on close
            15 connections updated cached ssthresh on close
        0 embryonic connections dropped
        15554 segments updated rtt (of 13699 attempts)
        544 retransmit timeouts
            20 connections dropped by rexmit timeout
            0 connections dropped after retransmitting FIN
        2 persist timeouts
            0 connections dropped by persist timeout
        0 keepalive timeouts
            0 keepalive probes sent
            0 connections dropped by keepalive
        2887 correct ACK header predictions
        40214 correct data packet header predictions
        79 SACK recovery episodes
        43 segment rexmits in SACK recovery episodes
        39243 byte rexmits in SACK recovery episodes
        256 SACK options (SACK blocks) received
        6226 SACK options (SACK blocks) sent
        0 SACK scoreboard overflow
        0 LRO coalesced packets
            0 times LRO flow table was full
            0 collisions in LRO flow table
            0 times LRO coalesced 2 packets
            0 times LRO coalesced 3 or 4 packets
            0 times LRO coalesced 5 or more packets
        3 limited transmits done
        106 early retransmits done
        20 times cumulative ack advanced along with SACK
    udp:
        6116 datagrams received
            0 with incomplete header
            0 with bad data length field
            0 with bad checksum
            0 with no checksum
            0 checksummed in software
                0 datagrams (0 bytes) over IPv4
                0 datagrams (0 bytes) over IPv6
            41 dropped due to no socket
            2230 broadcast/multicast datagrams undelivered
            0 times multicast source filter matched
            0 dropped due to full socket buffers
            0 not for hashed pcb
            3845 delivered
        994 datagrams output
            69 checksummed in software
                0 datagrams (0 bytes) over IPv4
                69 datagrams (11318 bytes) over IPv6
    ip:
        72011 total packets received
            0 bad header checksums
            0 headers (0 bytes) checksummed in software
            0 with size smaller than minimum
            0 with data size < data length
            3522 with data size > data length
                0 packets forced to software checksum
            0 with ip length > max ip packet size
            0 with header length < data size
            0 with data length < header length
            0 with bad options
            0 with incorrect version number
            0 fragments received
                0 dropped (dup or out of space)
                0 dropped after timeout
                0 reassembled ok
            71997 packets for this host
            14 packets for unknown/unsupported protocol
            0 packets forwarded (0 packets fast forwarded)
            0 packets not forwardable
            0 packets received for unknown multicast group
            0 redirects sent
        62678 packets sent from this host
            0 packets sent with fabricated ip header
            0 output packets dropped due to no bufs, etc.
            0 output packets discarded due to no route
            0 output datagrams fragmented
            0 fragments created
            0 datagrams that can't be fragmented
            0 tunneling packets that can't find gif
            0 datagrams with bad address in header
            0 packets dropped due to no bufs for control data
            71 headers (1428 bytes) checksummed in software
    icmp:
        41 calls to icmp_error
        0 errors not generated 'cuz old message was icmp
        Output histogram:
            destination unreachable: 41
        0 messages with bad code fields
        0 messages < minimum length
        0 bad checksums
        0 messages with bad length
        0 multicast echo requests ignored
        0 multicast timestamp requests ignored
        Input histogram:
            destination unreachable: 14
        0 message responses generated
        ICMP address mask responses are disabled
    igmp:
        0 messages received
        0 messages received with too few bytes
        0 messages received with wrong TTL
        0 messages received with bad checksum
        0 V1/V2 membership queries received
        0 V3 membership queries received
        0 membership queries received with invalid field(s)
        0 general queries received
        0 group queries received
        0 group-source queries received
        0 group-source queries dropped
        0 membership reports received
        0 membership reports received with invalid field(s)
        0 membership reports received for groups to which we belong
        0 V3 reports received without Router Alert
        2 membership reports sent
    ipsec:
        0 inbound packets processed successfully
        0 inbound packets violated process security policy
        0 inbound packets with no SA available
        0 invalid inbound packets
        0 inbound packets failed due to insufficient memory
        0 inbound packets failed getting SPI
        0 inbound packets failed on AH replay check
        0 inbound packets failed on ESP replay check
        0 inbound packets considered authentic
        0 inbound packets failed on authentication
        0 outbound packets processed successfully
        0 outbound packets violated process security policy
        0 outbound packets with no SA available
        0 invalid outbound packets
        0 outbound packets failed due to insufficient memory
        0 outbound packets with no route
    arp:
        5 ARP requests sent
        9 ARP replies sent
        0 ARP announcements sent
        98 ARP requests received
        6 ARP replies received
        104 total ARP packets received
        0 ARP conflict probes sent
        0 invalid ARP resolve requests
        0 total packets dropped due to lack of memory
        3 total packets dropped due to no ARP entry
        0 total packets dropped during ARP entry removal
        12 ARP entries timed out
        0 Duplicate IPs seen
    ip6:
        793 total packets received
            0 with size smaller than minimum
            0 with data size < data length
            0 with data size > data length
                0 packets forced to software checksum
            0 with bad options
            0 with incorrect version number
            0 fragments received
                0 dropped (dup or out of space)
                0 dropped after timeout
                0 exceeded limit
                0 reassembled ok
            784 packets for this host
            0 packets forwarded
            0 packets not forwardable
            0 redirects sent
            0 multicast packets which we don't join
            0 packets whose headers are not continuous
            0 tunneling packets that can't find gif
            0 packets discarded due to too may headers
            0 forward cache hit
            0 forward cache miss
            0 packets dropped due to no bufs for control data
        126 packets sent from this host
            0 packets sent with fabricated ip header
            0 output packets dropped due to no bufs, etc.
            4145 output packets discarded due to no route
            0 output datagrams fragmented
            0 fragments created
            0 datagrams that can't be fragmented
            0 packets that violated scope rules
        Input histogram:
            TCP: 22
            UDP: 762
            ICMP6: 9
        Mbuf statistics:
            507 one mbuf
            two or more mbuf:
                lo0= 69
            217 one ext mbuf
            0 two or more ext mbuf
            0 failures of source address selection
    icmp6:
        0 calls to icmp_error
        0 errors not generated because old message was icmp error or so
        0 errors not generated because rate limitation
        Output histogram:
            router solicitation: 4
            neighbor solicitation: 4
            neighbor advertisement: 4
            MLDv2 listener report: 7
        0 messages with bad code fields
        0 messages < minimum length
        0 bad checksums
        0 messages with bad length
        Input histogram:
            neighbor solicitation: 3
            neighbor advertisement: 6
        Histogram of error messages to be generated:
            0 no route
            0 administratively prohibited
            0 beyond scope
            0 address unreachable
            0 port unreachable
            0 packet too big
            0 time exceed transit
            0 time exceed reassembly
            0 erroneous header field
            0 unrecognized next header
            0 unrecognized option
            0 redirect
            0 unknown
        0 message responses generated
        0 messages with too many ND options
        0 messages with bad ND options
        0 bad neighbor solicitation messages
        3 bad neighbor advertisement messages
        0 bad router solicitation messages
        0 bad router advertisement messages
        0 bad redirect messages
        0 path MTU changes
    ipsec6:
        0 inbound packets processed successfully
        0 inbound packets violated process security policy
        0 inbound packets with no SA available
        0 invalid inbound packets
        0 inbound packets failed due to insufficient memory
        0 inbound packets failed getting SPI
        0 inbound packets failed on AH replay check
        0 inbound packets failed on ESP replay check
        0 inbound packets considered authentic
        0 inbound packets failed on authentication
        0 outbound packets processed successfully
        0 outbound packets violated process security policy
        0 outbound packets with no SA available
        0 invalid outbound packets
        0 outbound packets failed due to insufficient memory
        0 outbound packets with no route
    rip6:
        0 messages received
        0 checksum calcurations on inbound
        0 messages with bad checksum
        0 messages dropped due to no socket
        0 multicast messages dropped due to no socket
        0 messages dropped due to full socket buffers
        0 delivered
        0 datagrams output
    pfkey:
        0 requests sent to userland
        0 bytes sent to userland
        0 messages with invalid length field
        0 messages with invalid version field
        0 messages with invalid message type field
        0 messages too short
        0 messages with memory allocation failure
        0 messages with duplicate extension
        0 messages with invalid extension type
        0 messages with invalid sa type
        0 messages with invalid address extension
        0 requests sent from userland
        0 bytes sent from userland
        0 messages toward single socket
        0 messages toward all sockets
        0 messages toward registered sockets
        0 messages with memory allocation failure

Maybe you are looking for

  • Need suggestion for a burner and set up....

    Hi Last week I downloaded latest addition of I-tunes and have imported some songs. I want to put on a basic CD for listening in car. My computer (windows XP Home) doesn't have a built in CD burner so I need to purchase an external CD burner. I just n

  • Computer died need to sync with new computer...

    My hard drive died and took my itune library with it :P and now i can't sync my iphone 3GS to my new computer. music, video, apps i can start fresh ,and i have, but photos is not working. i click sync i am given a window replace the synced photos on

  • Converting flac films into iTunes format ?

    I have a series of films that are in flac format, and wish to put them into iTunes and on my iPad. I have searched on other forums but all of the converters are only for music (flac into mp3). Is there a free converter to put flac into mp4 or another

  • Flash CS5 and iPhone

    Hi, I've got a few questions about developing for iPhone in Flash CS5 that I can't seem to find the answer to anywhere. How do you compile for iPad using this? I see the option that says "Device" and "iPad", but what does this actually do? Does it ch

  • I cannot use editor. Sign In ID error

    When i try to open the editor for the trial it is trying to connect to the internet. and it tells me im not connected or to change my clock. How do i bypass this log in.