Nothing on my iPod touch works

At first, iTunes said I had to install a new version of the software, and my iPod had to be resored to do that. I restored my iPod and the new software was downloaded, but ever since my iPod has been saying i have an unstable connection and need to check my time and date settings. I cant get on iTunes, i cant send mail, i cant get into the app store, and i cant download apps. I made sure the time and date were set right, but it didnt work. does anyone know what to do?

look what is your software version ? once you upgrade to 3.0 you can not downgrade did you get the 3.0 version that has been been floating around and that people think its the final version aka golden master thats what some people online call it try to wait tommorow to restore it if you do have a un authorize 3.0 version .so tommorow put it in DFU mode to do that turn it off and then connect the cable tto the computer the second you do that hold the home botton till you see the itunes logo with a cable like the firt time you synced it now on your screen you will see a error saying itunes has detected a ipod in recovery or DFU mode click ok and then click restore thats the only option you should see.And it should tell you to buy the 3.0 software because you dont have it under the file that itunes keeps the updates and it should check if you bought it .then let itunes restore it to 3.0 .Thats it hope this helped try to do this tommorow.

Similar Messages

  • TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

    hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Does the iPod see the network? Error message? Does the iPod connect to other networks?

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • Will Ipod Touch work with Windows 8

    Will IPod Touch work with Windows 8?  Why is that not even a listed option in the help feature?

    Apple has just not got around to revising the documentation to reflect Win 8. Just use instructions for Win 7

  • HT201335 does the Ipod touch work with the airplay mirroring

    Does the Ipod touch work with airplay mirroring?

    No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

  • Will ipod touch work with airport express?

    will ipod touch work with airport express?

    Is your Touch running iOS 5.n? If so, you can administer the AX with the AirPort Utility which you can download directly from the Apple App Store.

  • My Ipod touch works but seems to be in a zoom mode, all the icons are giant.

    My Ipod touch works but seems to be in a zoom mode, all the icons are giant.

    Double tap the screen with 3 fingers.
    Stedman

  • What generations  of ipod touch works with facetime?

    What generations of ipod touch work with facetime? I would imagine, one download the application to the computer then sync with the ipod touch. Will facetime work with itunes on a windows box or it only works with Apple computer / laptob....

    4th generation iPod Touch
    FaceTime only works on Apple products at this time.

  • Will the iPod touch work with Leopard?

    As I narrow in on my purchase, I have one last question. I upgraded my Powerbook G4 to Leopard. Will the iPod Touch work with Leopard?

    Yes.

  • My ipod touch work trackly when i pluged it in charge

    my ipod touch work trackly when i pluged it in charge,is there any problem?

    I assume you have a 5G iPod. A few other 5G users have reported similar problem and the following has bee recommended. I have not see anyone post what exactly happened.
    - Try another cable
    - Try another charging source
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I am going to be traveling to Switzerland, will my wifi on my ipod touch work there?

    I am going to be traveling to Switzerland, will my wifi on my ipod touch work there?

    Yes; WiFi will work.

  • Will my ipod touch work with qwest wifi?

    will my ipod touch work with qwest wifi?

    Tell us more about qwest wifi. Unless the it requires Flash or Java or something else that the iPod does not support for login it should work.  What are the instructions for logigng in?

  • Does the ipod touch works on any D-link Wireless or not

    Does the ipod touch works on any D-link Wireless or not

    Yes. I've been using it on multiple wifi networks. This D-Link is a DI-524 router with wifi. I have WEP enabled, SSID hidden. I'm a teacher and have it hooked up to the school network. (The network guy approved.) It runs my laptop, another teacher's laptop and my iPod via wifi. Being able to show science demos via YouTube is great!

  • Only right side speaker on my ipod touch works

    I have an I Pod touch, only one side of the speakers work.  Where do I get it repaired? Do I send it off and where?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. Already suggested
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. Already suggested.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Ipod Touch works with APPLE and not WINDOWS

    I have a first generation touch. Yesterday the PC crashed while syncing with the iTouch. After that it would not see the iPod any longer. However the APPLE I have sees it just fine. I have gone through the detailed uninstall and re install itunes process several times and tried cleaning the registry - still nothing http://support.apple.com/kb/HT1923 .
    The PC based iTunes syncs with another 2G and a nano and a shuffle just fine. Windows also sees the 1G Touch..... ideas other than moving my library to my laptop? I have also reset the 1G and upgraded the software now to the latest firmware. It still works with the APPLE but not with the PC. I am sure this is a driver issue but I cannot get it fixed.

    Well I happened on the answer after doing a lot of searches. Why doesn't apple post the fix on their site. This problem is due to their installation package for Vista and the fix does not require all the uninstalls and re installs you have been asked to do so many times....
    THANK YOU BeeBopp
    Posts: 3
    From: USA
    Registered: Feb 15, 2009
    Re: Ipod touch is recognized as a camera
    Posted: Feb 16, 2009 7:43 AM in response to: Twin195 Reply Email
    This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.
    Here are the steps:
    1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
    2. Log in using an ADMINISTRATIVE account
    3. Single left click on START
    4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)
    5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)
    6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)
    7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)
    8. Right click on " Apple iPod " then single left click on Properties
    9. Single left click on the " Driver " tab
    10. Single left click on " Update driver "
    11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista
    12. Single left click on " Include this location in the search " if shown
    13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "
    14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.
    15. Hopefully you will get a successful message.
    16. The correct drivers(s) are now installed.
    17. Start up iTunes, and see if you iPod is detected again.
    Hope this works for you as it did for me and several others.

Maybe you are looking for

  • My ipod won't show up as a device on itunes

    Every once in a while my ipod (2nd gen) won't show up as a device  on itunes.   Any thoughts on what might be wrong?  I really miss not being able to download my updated pocasts --- the music isn't an issue because I can still listen to whatever I ha

  • Need  table which is having User name and surname

    hi, I am having User ID from caufvd strucure , based on this i want User name and surname. In which table i will get those two fields by passing User id. Please urgent. Thanks, MK.

  • Bad response in a Web Service on OC4J with many concurrrent clients

    We have a Web Service in a OC4J container, this Web Services invoke the business services from another complex application (another ear with EJBs in the same container) with RMI connections. We need this web service support many concurrent clients, b

  • Since upgrading quicktime to 7 its not working

    I,ve tried the 6.5.2 re-0intsaller but that says " you do not have suitable software installed on ur mac' I have also tried the 7.02 to 7.01 installer as well with the same issue. What are proper pain in the arse. Common Apple ! ive nor got time to w

  • Task of message server inside application server architecture

    Hi Folks,       I have just started learning ABAP.       And i have following queries in mind. what is the task of message server inside the application server architecture?       Regards