Nothing shown in "Hardware" of the module browser

Hi all,
I have installed the Sun MC server (base only) and agent on an E420R server. However, nothing is shown in "Hardware" of the module browser in Sun MC console. I have already installed these add-on products:
ELP Config-Reader Monitoring
Workgroup Server
which are supposingly the config reader for E420R, right?
Have I missed anything?
Regards,
Kelvin

I assume you are using the current 3.5.1a distribution.
If your OPB banner and `uname -i` do not match, Sun MC will not detect the correct hardware. Check your 'Entity Family' in the 'Info' tab of the host details view to determine what SunMC is detecting.
If this entity family and your uname -i differ, you will need to modify the banner to match your hardware and re-run es-inst.
"/usr/platfrom/`uname -i`/sbin/prtdiag | head -1"
The banner name for your system shoud be "Sun Enterprise 420R".
The "eeprom" command in the same sbin location can be used to change the banner.
I recently fixed a bunch of Blade 2000's that had incorrect banners this way.
This information, and details on the 420R specifically, are available in the FAQ:
http://www.sun.com/software/solaris/sunmanagementcenter/faq/addons.xml#q5
cheers,
iMac
[email protected]

Similar Messages

When I click a link in email client (apple mail), it does not open in firefox. I have checked both Firefox and Safari and Firefox is the default browser.

When clicking a link in either apple mail or even from a word document, nothing happens.

Try to redo the default browser and make another browser like Safari the default and then let Firefox do it again.
See:
* [[How to make Firefox the default browser]]
* [[Setting Firefox as the default browser does not work]]
* http://kb.mozillazine.org/Default_browser

My ipad mini is total blank off. Nothing shown on screen. Battery is fully charged. what happens?

My iPad mini is totally blank off. nothing shown on screen. The battery is charged. What happens?

You are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

This server does not have the module needed for interpreting traces

I wan to use the Trace Control function of the Exchange Troubleshooting Assistant. I specifically want to look at the transactions of a particular user. When starting the function I get the message, "This server does not have the module needed for interpreting traces." I find nothing to tell me what the module is or where to get it.
Specifically, I have a Macintosh user (bigwig in my organization) that insists on using Apple's 10.6 Calendar program, and constantly complains that his calendars are different between his 3 Macs and his iPhone. He claims to have put a calendar item on one machine, now it appears nowhere. And I have no way of proving what is going wrong. He hates Outlook and refuses to use it, he hates Entourage and refuses to use it. The local database for Entourage kept getting fouled up to the point that we kept having to delete this account and readding it to force the recreation of the database. The database tool never fixed the problems and of course he did a lot of customization that got destroyed every time we deleted the account settings and added them back.
I really want to run the tool for a while and see if there is actually some transaction actually happening on the server side, so I would like to have these traces and be able to view them.
SnoBoy

See
http://blogs.msdn.com/b/dvespa/archive/2011/05/27/how-to-use-extra-to-troubleshoot-rpc-client-access-issues.aspx.
Just click on ok and proceed with set trace manually.
Svetozar Petrović

"Only files in Apple Loops format will be shown in the loop browser".

I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
What do i do?
Please help.
Thanks
Rohan

I've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
Comes along with Result Code=-43.
I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
My process:
Take original audio.
Flex it using slice mode.
Bounce in place.
Drag new region into Loops browser.
Errors ensue.

In photoshop elements 10, I followed instructions to update the Inspiration Browser. Nothing happens

I started Photoshop Elements 10 and followed instructions to update the Inspiration Browser. After clicking download and install nothing happens.

I installed Photoshop Elements today and ran into the same problem following the instructions to update the Inspiration Browser---nothing happened after clicking "Install Now" on the installation link. Updating Adobe Air to the latest version got around the problem for me. I was offered to update after running Adobe Commmunity Help for the first time. The update took my already installed version two to version three, and after that clicking on "Install Now" began an installation process that insalled the Inspiration Browser. Hope this helps.

I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How could the Oracle Application Module Browser collect all the interfaces?

How could the Oracle Application Module Browser comes with the Oracle AS Adapter collect all the interfaces that are available through Oracle Integration Repository? Is it from the XML description file in the Oracle Integration Repository?
Thanks,
Qing

Did you ever figure this out? I'm encountering the same issue.
Thanks.

Used ipod as a drive to copy songs into new itunes on new computer. Some songs do play in entirety, las minute cuts off with nothing plyaing, or it suddenly starts playing a different song. "TIme" shown is correct in the file.

Used ipod as a drive to copy songs into new itunes on new computer. Some songs do play in entirety, last 30 seconds to minute cuts off with nothing plyaing, or it suddenly starts playing a different song. "TIme" shown is correct in the file. Any way to fix this?

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

How can I select the Quicktime plug-in (in Firefox) as the Helper Application, as only programs out of the web browser are shown?

I recently updated my QuickTime Plug-in (7.7.4) on Firefox 21. Prior to the update, I could open midi files in the Firefox and other browsers with a QuickTime Player. Now, I've got my Windows 7 computer asking how it should save or open the file. The QuickTime Plug-in is enabled and works with other types of files. If I open Tools, select Options, and select Applications, I do have the option of selecting "Use QuickTime Plug-in 7.7.4 (in Firefox)" for many file types. For the "Midi Sequence" type, it isn't an option, (only programs which open the midi files outside of the browser). Presently my only option is to use "Windows Media Player" as the default program, (opening midi files outside of the browser). "Mid file" allows the selection of the QuickTime Plug-in but still goes out of the Firefox browser to use the Windows Media Player, whether the file's extension is .mid or .midi
Is these someplace I can find the "Use QuickTime Plug-in 7.7.4 (in Firefox)" with the "Browse" within my computer's files, or am I now stuck using the "Windows Media Player" when a plug-in should be able to do this simple task? I can watch YouTUbe (in Firefox) but cannot play a midi file (in Firefox)!

QT 7.7.4 use "audio/mid" MIME type only and does not understand now "audio/midi" and "audio/x-midi" types commonly used on server side. Blame Apple for that.

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

I upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back?

i upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back? I tried using the shortcut for it and nothing happens. When I try to do it from the view menu, it shows up as something I can't click on. The new library format is driving me crazy and I just want to get back to the old library view.

We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge]

How do I set firefox as the default browser in Windows Server 2012 Group Policy Editor?

Hello, I am unable to set firefox as the default browser despite multiple different attempts to do so using group policy.
I have:
- Set a registry command (targeted at 32/64 via a WMI query) to reset the opening command as shown below:
HKEY_CURRENT_USER\Software\Classes\http\shell\open\command
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -osint -url "%1"
- Set a powershell logon script to run (that does run):
firefox.exe -silent -setDefaultBrowser
Despite setting the above it seems the client computers browsers are not affected by the settings above. When the script runs or if I run the command above a UAC window pops up and requests that I accept the command (for the setDefaultBrowser) but even if I click yes as an administrator it does nothing.
Since GPO in 2012 has changed perhaps there is something that I am missing? Do I need to somehow disable Windows Internet Explorer from achieving default browser status?
Please do not reply if you will suggest that I use Internet Explorer Maintenance (since this function in GPO has been disabled since IE10)
My DC is Server 2012, my client computers are Win7 32/64.

The above reply does not take into account that I am trying to use GROUP POLICY EDITOR to make it the default browser.

Why is the column browser greyed out when viewing iPod music?

Hello,
I can not display the "column browser" for my iPod Touch, like I can for my iTunes Music Library (iTunes for Windows)
To confirm we're on the same page: the column browser is the specific display/view with "Artists" and "Albums" filters (and optionally 'Genres" , "Composers" and a few other not-so-useful options) in Columns at the top of the screen: selecting different combinations allows you to easily filter the "results" panel below, which displays all the individual songs that match those filters.
I have seen other questions on how to display the column browser, which relate more to the iTunes Library Music, opposed to the iPod touch music. (FYI the fix for the Library is to click "songs" and then the option for column browsing is available in "View/Column Browser/Show Column Browser")
If i display the sidebar, and select 'Music' under my iPod Touch, it just displays ALL songs. The option for "show column browser" is greyed out and not selectable. If i hige the sidebar, and click "Music" in the top left column under the name of my iPod, i get the same view. If i click "Music" from the big centered bar at the top of iTunes (but below the standard File/Edit menubar) this just shows my Sync options...
So question is: How do I display the column browser for my iPod music?
If i can't, question is: Why did you hide this feature and can you please bring it back?
And a general comment: Please let the brilliant Jony Ive loose on the iTunes design ASAP: it desperately needs a designer's eye to make this interface more intuitive. There are about 5 incongruous button/menu themes utilised at different places, and none of them are particularly well thought out. I'm a student of the school of thought where you can (if needed) utilise a few different interface design styles on one application to suit different users and different scenarious: but they need a talented designer to harmonise. The current iTunes is like years of changes piled on top of each other with no clear direction. Not an enjoyable experience!

Hello,
All outputs from the SCXI module are measured in differential mode. You can still mix differential and single ended measurements (if you use the remaining channels of your daq board).
The easiest way to mix modes is with virtual channels. All SCXI analog input channels will be differential, while you can make other virtual channels differential or single ended. If you don't want to use virtual channels, you can use AI Hardware Config in LabVIEW to change the mode.
Hope this helps. Regards,
John N
Applications Engineer
National Instruments

Nothing shown in "Hardware" of the module browser

Similar Messages

Maybe you are looking for