[nothing to do/solved]unable to mount external devices after update

Hi,
in recent times I was unable to mount usb-sticks for example after a kernel update, I assume. The first time mount didnt know the fstype vfat nor any other.. and now the second time the device wasnt even listed under /dev. dmesg told me that the device was recognized though. Rebooting the system fixed it both times, but this isnt really satisfying.
Since I am not that knowledgeable, I would like to know what I could have tried.
Thanks
Last edited by dt (2011-12-18 11:41:44)

dt wrote:
Hi,
in recent times I was unable to mount usb-sticks for example after a kernel update, I assume. The first time mount didnt know the fstype vfat nor any other.. and now the second time the device wasnt even listed under /dev. dmesg told me that the device was recognized though. Rebooting the system fixed it both times, but this isnt really satisfying.
Since I am not that knowledgeable, I would like to know what I could have tried.
Thanks
There's nothing wrong here. You updated the kernel and didn't reboot. The modules needed for the drive did not exist when you tried to mount it.

Similar Messages

  • Unable to locate external device after upgrade

    i have been using FCE 2.0.3 and mac os 10.3 to view clips on video monitor (tv) easy set up was dv pal. so i chose view and and then firewire from the FCE menu to review clips on video monitor through my cannon mv750i-worked ok until recently. I have also been able to capture as well. Nothing wrong with the camera as it works ok in another computer (power pc) which has mac os 10.4.7 but fce is still 2.0.3. So is something i am not doing?
    i then upgraded to mac os 10.4 and fce to 3.5 and easy set up also at same dv pal and a window message comes up informing me that "unable to locate external device" or you have changed system configurations. I have made sure that the camera is on. so please can someone tell me what i can do?

    When I recently upgraded from OSX 10.3.9 to OSX 10.4.7 I found that FCE 3.0 would not recognise the camera.
    When I upgraded to QuickTime 7.1.2 the problem immediately disappeared.
    http://www.apple.com/quicktime/download/mac.html
    Ian.

  • [SOLVED] Unable to start vmware 9 after update

    Hello Folks,
    I got one weird issue after update,
    I tried to start vmware, failed as nothing happeded, no error message shown.
    Do you have any clues ?
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# uname -a
    Linux tp 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware-modconfig --console --install-all
    Stopping VMware services:
       VMware Authentication Daemon                                        done
       VM communication interface socket family                            done
       Virtual machine communication interface                             done
       Virtual machine monitor                                             done
       Blocking file system                                                done
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/hostif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/memtrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driverLog.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/apic.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/vmx86.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/cpuid.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/task.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/hashFunc.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/comport.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/phystrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmcore/moduleloop.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmmon-only/vmmon.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    cp -f vmmon.ko ./../vmmon.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/hub.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/netif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/userif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/bridge.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/filter.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/procfs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac_compat.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetUserListener.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmnet-only/vmnet.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    cp -f vmnet.ko ./../vmnet.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/filesystem.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/file.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/stubs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/block.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/module.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/control.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/super.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.o
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: (near initialization for ‘RootInodeOps.lookup’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: (near initialization for ‘LinkDentryOps.d_revalidate’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmblock-only/vmblock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    cp -f vmblock.ko ./../vmblock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/vmciKernelIf.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDriver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDatagram.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciResource.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciRoute.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciContext.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciHashtable.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQueuePair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQPair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDoorbell.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmci-only/vmci.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    cp -f vmci.ko ./../vmci.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/af_vsock.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/vsockAddr.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notifyQState.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/util.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/stats.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notify.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vsock-only/vsock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    cp -f vsock.ko ./../vsock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    Starting VMware services:
       Virtual machine monitor                                             done
       Virtual machine communication interface                             done
       VM communication interface socket family                            done
       Blocking file system                                                done
       Virtual ethernet                                                   failed
       VMware Authentication Daemon                                        done
    Unable to start services
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─#
    Thanks in advance,
    Liao
    Last edited by liao (2013-01-11 14:10:29)

    after check vmware message under /tmp/vmware-$USER/vmware*.log, found one package is missing - libpng12, after installed it, everything looks good again

  • Won't show external monitor after updating to 10.9.2

    Late model 2012 macbook pro (non-retina) won't connect to external monitor after updating to 10.9.2    Tried PRAM, cleaning preferences; in safe mode the monitor does show up, but how does that help me?
    Bob

    I have the same problem with my mid 2012 mbp, but I can get the external monitor to show if I dont using the mirroring feature. Not exactly what I want to use but it may help if no one can find a solution.

  • I am unable to activate my iphone after update

    i am unable to activate my iphone3gs after update ios with 6.1.3
    help me soon

    Try troubleshooting activation issues.

  • [Solved] unable to mount harddisk partition or flash drive

    After recent updates to gnome 3.4.2,i am unable to mount  harddisk partition or flash drive .I have 2 year old arch installation with gnome.
    When i click on partitions in nautilus,it says "Unable to mount program files \n Not authorized to perform operation"
    Problem is not only while mounting partitions.
    Wherever we need authorization .Like changing date and time ,changing user accounts using gnome UI etc.The unlock button is greyed out permanently.
    even i am not able to shutdown using gnome menus. it just log me out only ,do not restart or shutdown.Though i can shutdown using shutdown command on commandline.
    i run gnome using daemon method. not through xinitrc .
    https://bugs.archlinux.org/task/25031?p … ekit#close
    I found a similar discussion in this bug. But since, i do not use xinitrc, it is unlikely they will help me.
    Can someone be kind enough to help me on this?
    Thanks in advance.
    Last edited by piyushbhatt (2012-09-11 05:48:57)

    maybe changes in udev or any other package
    you have polkit polkit-gnome
    and you user is in optical, disks and wheel groups?
    for me those above work in every sitation

  • [Solved] Unable to find root device

    Hi guys,
    it's been three days now that my laptop refuses to boot with a message from systemd like this:
    ERROR: device 'UUID=xxx...' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=xxx...'.
    You are being dropped to a recovery shell.
    That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
    But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
    I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
    In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
    It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
    However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
    [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
    [ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
    [ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
    [ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] log_buf_len: 1048576 bytes
    [ 0.000000] early log buf free: 519600(99%)
    [ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
    [ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
    [ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21edfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
    [ 0.000000] On node 0 totalpages: 1997309
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12786 pages used for memmap
    [ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18360 pages used for memmap
    [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2593.984 MHz processor
    [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140926
    [ 0.020437] ACPI: All ACPI Tables successfully acquired
    [ 0.021107] Security Framework initialized
    [ 0.021114] Yama: becoming mindful.
    [ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024297] Initializing cgroup subsys memory
    [ 0.024302] Initializing cgroup subsys devices
    [ 0.024304] Initializing cgroup subsys freezer
    [ 0.024305] Initializing cgroup subsys net_cls
    [ 0.024307] Initializing cgroup subsys blkio
    [ 0.024325] CPU: Physical Processor ID: 0
    [ 0.024326] CPU: Processor Core ID: 0
    [ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025227] mce: CPU supports 7 MCE banks
    [ 0.025238] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.026009] ftrace: allocating 20921 entries in 82 pages
    [ 0.033432] dmar: Host address width 39
    [ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
    [ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
    [ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.033572] HPET id 0 under DRHD base 0xfed91000
    [ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
    [ 0.033573] This will slightly decrease performance.
    [ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.033713] Enabled IRQ remapping in xapic mode
    [ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
    [ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
    [ 0.067366] TSC deadline timer enabled
    [ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067404] ... version: 3
    [ 0.067405] ... bit width: 48
    [ 0.067406] ... generic registers: 4
    [ 0.067407] ... value mask: 0000ffffffffffff
    [ 0.067407] ... max period: 0000ffffffffffff
    [ 0.067408] ... fixed-purpose events: 3
    [ 0.067409] ... event mask: 000000070000000f
    [ 0.090846] x86: Booting SMP configuration:
    [ 0.090848] .... node #0, CPUs: #1
    [ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.111723] #2 #3
    [ 0.146545] x86: Booted up 1 node, 4 CPUs
    [ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
    [ 0.149839] devtmpfs: initialized
    [ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
    [ 0.152488] pinctrl core: initialized pinctrl subsystem
    [ 0.152525] RTC time: 14:27:35, date: 01/29/15
    [ 0.152613] NET: Registered protocol family 16
    [ 0.163220] cpuidle: using governor ladder
    [ 0.176565] cpuidle: using governor menu
    [ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.176606] ACPI: bus type PCI registered
    [ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.176776] PCI: Using configuration type 1 for base access
    [ 0.176783] dmi type 0xB1 record - unknown flag
    [ 0.190254] ACPI: Added _OSI(Module Device)
    [ 0.190257] ACPI: Added _OSI(Processor Device)
    [ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
    [ 0.527048] ACPI: Dynamic OEM Table Load:
    [ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.540534] ACPI: Dynamic OEM Table Load:
    [ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.553725] ACPI: Dynamic OEM Table Load:
    [ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.607146] ACPI: Interpreter enabled
    [ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.607184] ACPI: (supports S0 S3 S4 S5)
    [ 0.607185] ACPI: Using IOAPIC for interrupt routing
    [ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.608649] ACPI: Power Resource [PG00] (on)
    [ 0.620317] ACPI: Power Resource [PG01] (on)
    [ 0.640702] ACPI: Power Resource [PG02] (on)
    [ 1.401836] ACPI: Power Resource [FN00] (off)
    [ 1.401913] ACPI: Power Resource [FN01] (off)
    [ 1.401986] ACPI: Power Resource [FN02] (off)
    [ 1.402057] ACPI: Power Resource [FN03] (off)
    [ 1.402127] ACPI: Power Resource [FN04] (off)
    [ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 1.404193] PCI host bridge to bus 0000:00
    [ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
    [ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
    [ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
    [ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
    [ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
    [ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
    [ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
    [ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
    [ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
    [ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
    [ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
    [ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
    [ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
    [ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
    [ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
    [ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
    [ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
    [ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
    [ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
    [ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
    [ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
    [ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.614019] vgaarb: loaded
    [ 1.614020] vgaarb: bridge control possible 0000:00:02.0
    [ 1.614099] PCI: Using ACPI for IRQ routing
    [ 1.615308] PCI: pci_cache_line_size set to 64 bytes
    [ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
    [ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
    [ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
    [ 1.615428] NetLabel: Initializing
    [ 1.615429] NetLabel: domain hash size = 128
    [ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.615438] NetLabel: unlabeled traffic allowed by default
    [ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.617497] Switched to clocksource hpet
    [ 1.621576] pnp: PnP ACPI init
    [ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 1.621755] system 00:00: [io 0xffff] has been reserved
    [ 1.621756] system 00:00: [io 0xffff] has been reserved
    [ 1.621758] system 00:00: [io 0xffff] has been reserved
    [ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
    [ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.001167] pnp: PnP ACPI: found 8 devices
    [ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
    [ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 2.007594] NET: Registered protocol family 2
    [ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
    [ 2.008100] TCP: reno registered
    [ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008195] NET: Registered protocol family 1
    [ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
    [ 2.024532] PCI: CLS 64 bytes, default 64
    [ 2.024577] Unpacking initramfs...
    [ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
    [ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
    [ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.341843] Scanning for low memory corruption every 60 seconds
    [ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 2.342061] Initialise system trusted keyring
    [ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.343277] zpool: loaded
    [ 2.343280] zbud: loaded
    [ 2.343434] VFS: Disk quotas dquot_6.5.2
    [ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.343557] msgmni has been set to 15200
    [ 2.343599] Key type big_key registered
    [ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.343779] io scheduler noop registered
    [ 2.343781] io scheduler deadline registered
    [ 2.343802] io scheduler cfq registered (default)
    [ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
    [ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.344363] vesafb: scrolling: redraw
    [ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
    [ 2.492136] Console: switching to colour frame buffer device 240x67
    [ 2.639261] fb0: VESA VGA frame buffer device
    [ 2.639278] intel_idle: MWAIT substates: 0x11142120
    [ 2.639279] intel_idle: v0.4 model 0x45
    [ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.639471] GHES: HEST is not enabled!
    [ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.639854] Linux agpgart interface v0.103
    [ 2.639890] rtc_cmos 00:01: RTC can wake from S4
    [ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.640037] Intel P-state driver initializing.
    [ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.640415] TCP: cubic registered
    [ 2.640635] NET: Registered protocol family 10
    [ 2.641104] NET: Registered protocol family 17
    [ 2.641809] Loading compiled-in X.509 certificates
    [ 2.641841] registered taskstats version 1
    [ 2.642839] Magic number: 15:558:486
    [ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
    [ 2.643157] PM: Hibernation image not present or could not be loaded.
    [ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 2.645137] Write protecting the kernel read-only data: 8192k
    [ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
    [ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
    [ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
    [ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
    [ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
    [ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
    [ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
    [ 2.657455] systemd-udevd[61]: starting version 218
    [ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
    [ 2.657510] systemd-udevd[61]: Load module index
    [ 2.657562] systemd-udevd[61]: Created link configuration context.
    [ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
    [ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
    [ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
    [ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    [ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    [ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    [ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    [ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    [ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    [ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
    [ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    [ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
    [ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
    [ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
    [ 2.658188] systemd-udevd[61]: Unload module index
    [ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
    [ 2.658262] systemd-udevd[62]: set children_max to 16
    [ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
    [ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
    [ 2.660575] systemd-udevd[67]: seq 678 running
    [ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
    [ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.660651] systemd-udevd[67]: seq 678 processed with 0
    [ 2.714860] raid6: sse2x1 9342 MB/s
    [ 2.771561] raid6: sse2x2 11848 MB/s
    [ 2.828260] raid6: sse2x4 13887 MB/s
    [ 2.884943] raid6: avx2x1 18356 MB/s
    [ 2.941655] raid6: avx2x2 21230 MB/s
    [ 2.998344] raid6: avx2x4 24583 MB/s
    [ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
    [ 2.998346] raid6: using avx2x2 recovery algorithm
    [ 2.998547] xor: automatically using best checksumming function:
    [ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
    [ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 2.998639] systemd-udevd[67]: seq 679 running
    [ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
    [ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.998684] systemd-udevd[67]: seq 679 processed with 0
    [ 3.031698] avx : 25444.800 MB/sec
    [ 3.034144] systemd-udevd[62]: Validate module index
    [ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
    [ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
    [ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034249] systemd-udevd[67]: seq 680 running
    [ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
    [ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034308] systemd-udevd[67]: seq 680 processed with 0
    [ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
    [ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034945] systemd-udevd[67]: seq 681 running
    [ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
    [ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034986] systemd-udevd[67]: seq 681 processed with 0
    [ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
    [ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035087] systemd-udevd[67]: seq 682 running
    [ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
    [ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035118] systemd-udevd[67]: seq 682 processed with 0
    [ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
    [ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035790] systemd-udevd[67]: seq 683 running
    [ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
    [ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
    [ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035834] systemd-udevd[67]: seq 683 processed with 0
    [ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
    [ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
    [ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035961] systemd-udevd[67]: seq 685 running
    [ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
    [ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
    [ 3.035981] systemd-udevd[75]: seq 684 running
    [ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.036004] systemd-udevd[67]: seq 685 processed with 0
    [ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
    [ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036031] systemd-udevd[75]: seq 684 processed with 0
    [ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
    [ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
    [ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
    [ 3.036165] systemd-udevd[76]: seq 686 running
    [ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036180] systemd-udevd[75]: seq 688 running
    [ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
    [ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
    [ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
    [ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036215] systemd-udevd[75]: seq 688 processed with 0
    [ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036231] systemd-udevd[76]: seq 686 processed with 0
    [ 3.036257] Btrfs loaded
    [ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
    [ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
    [ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
    [ 3.036378] systemd-udevd[77]: seq 689 running
    [ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
    [ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
    [ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036439] systemd-udevd[77]: seq 689 processed with 0
    [ 3.036457] systemd-udevd[76]: seq 691 running
    [ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
    [ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036498] systemd-udevd[76]: seq 691 processed with 0
    [ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
    [ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
    [ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036576] systemd-udevd[76]: seq 693 running
    [ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
    [ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
    [ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
    [ 3.036619] systemd-udevd[76]: seq 693 processed with 0
    [ 3.036637] systemd-udevd[77]: seq 694 running
    [ 3.036649] systemd-udevd[78]: seq 692 running
    [ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
    [ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036676] systemd-udevd[77]: seq 694 processed with 0
    [ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
    [ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.036698] systemd-udevd[78]: seq 692 processed with 0
    [ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
    [ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
    [ 3.036801] systemd-udevd[80]: seq 695 running
    [ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
    [ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.036848] systemd-udevd[80]: seq 695 processed with 0
    [ 3.036859] systemd-udevd[76]: seq 696 running
    [ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
    [ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
    [ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
    [ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
    [ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
    [ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036992] systemd-udevd[76]: seq 696 processed with 0
    [ 3.037009] systemd-udevd[67]: seq 687 running
    [ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
    [ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037048] systemd-udevd[67]: seq 687 processed with 0
    [ 3.037063] systemd-udevd[75]: seq 690 running
    [ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
    [ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.037097] systemd-udevd[75]: seq 690 processed with 0
    [ 3.037372] udevadm[79]: calling: trigger
    [ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
    [ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
    [ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
    [ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
    [ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
    [ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
    [ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
    [ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
    [ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
    [ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
    [ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
    [ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
    [ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
    [ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
    [ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
    [ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
    [ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
    [ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
    [ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
    [ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
    [ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
    [ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
    [ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
    [ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
    [ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
    [ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
    [ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
    [ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
    [ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
    [ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
    [ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
    [ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
    [ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
    [ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
    [ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
    [ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
    [ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
    [ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
    [ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
    [ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
    [ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
    [ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
    [ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
    [ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
    [ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
    [ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
    [ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
    [ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
    [ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
    [ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
    [ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
    [ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
    [ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
    [ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
    [ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
    [ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
    [ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
    [ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
    [ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
    [ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
    [ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
    [ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
    [ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
    [ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
    [ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
    [ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
    [ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
    [ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
    [ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
    [ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
    [ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
    [ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037890] systemd-udevd[67]: seq 697 running
    [ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
    [ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
    [ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
    [ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
    [ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037925] systemd-udevd[67]: seq 697 processed with 0
    [ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
    [ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037988] systemd-udevd[67]: seq 698 running
    [ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
    [ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038015] systemd-udevd[67]: seq 698 processed with 0
    [ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
    [ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038076] systemd-udevd[67]: seq 702 running
    [ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
    [ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
    [ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038106] systemd-udevd[67]: seq 702 processed with 0
    [ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
    [ 3.038113] systemd-udevd[78]: seq 703 running
    [ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
    [ 3.038143] systemd-udevd[80]: seq 704 running
    [ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
    [ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038158] systemd-udevd[78]: seq 703 processed with 0
    [ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
    [ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
    [ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038179] systemd-udevd[80]: seq 704 processed with 0
    [ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038192] systemd-udevd[67]: seq 705 running
    [ 3.038201] systemd-udevd[78]: seq 706 running
    [ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
    [ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
    [ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
    [ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038228] systemd-udevd[67]: seq 705 processed with 0
    [ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
    [ 3.038243] systemd-udevd[80]: seq 707 running
    [ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038246] systemd-udevd[78]: seq 706 processed with 0
    [ 3.038254] systemd-udevd[76]: seq 700 running
    [ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
    [ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038275] systemd-udevd[80]: seq 707 processed with 0
    [ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
    [ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038310] systemd-udevd[76]: seq 700 processed with 0
    [ 3.038325] systemd-udevd[75]: seq 699 running
    [ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
    [ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038364] systemd-udevd[75]: seq 699 processed with 0
    [ 3.038405] systemd-udevd[77]: seq 701 running
    [ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
    [ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038432] systemd-udevd[77]: seq 701 processed with 0
    [ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
    [ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
    [ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038623] systemd-udevd[81]: seq 708 running
    [ 3.038627] systemd-udevd[67]: seq 709 running
    [ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
    [ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
    [ 3.038653] systemd-udevd[75]: seq 710 running
    [ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
    [ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
    [ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
    [ 3.038671] systemd-udevd[67]: seq 709 processed with 0
    [ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
    [ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
    [ 3.038682] systemd-udevd[81]: seq 708 processed with 0
    [ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
    [ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038700] systemd-udevd[75]: seq 710 processed with 0
    [ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
    [ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038734] systemd-udevd[67]: seq 711 running
    [ 3.038753] systemd-udevd[76]: seq 713 running
    [ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
    [ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
    [ 3.038784] systemd-udevd[67]: seq 711 processed with 0
    [ 3.038797] systemd-udevd[75]: seq 712 running
    [ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038803] systemd-udevd[76]: seq 713 processed with 0
    [ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
    [ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038845] systemd-udevd[75]: seq 712 processed with 0
    [ 3.038849] systemd-udevd[77]: seq 714 running
    [ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
    [ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
    [ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038878] systemd-udevd[77]: seq 714 processed with 0
    [ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
    [ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
    [ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
    [ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
    [ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038976] systemd-udevd[75]: seq 719 running
    [ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
    [ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
    [ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
    [ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039004] systemd-udevd[75]: seq 719 processed with 0
    [ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
    [ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
    [ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039070] systemd-udevd[75]: seq 720 running
    [ 3.039078] systemd-udevd[76]: seq 721 running
    [ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
    [ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039094] systemd-udevd[75]: seq 720 processed with 0
    [ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
    [ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.039133] systemd-udevd[76]: seq 721 processed with 0
    [ 3.039146] systemd-udevd[67]: seq 715 running
    [ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
    [ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.039181] systemd-udevd[67]: seq 715 processed with 0
    [ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039224] systemd-udevd[77]: seq 722 running
    [ 3.039235] systemd-udevd[78]: seq 723 running
    [ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
    [ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
    [ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
    [ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.039267] systemd-udevd[77]: seq 722 processed with 0
    [ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.039277] systemd-udevd[78]: seq 723 processed with 0
    [ 3.039284] systemd-udevd[75]: seq 717 running
    [ 3.039288] systemd-udevd[76]: seq 718 running
    [ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
    [ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
    [ 3.039309] sys

    Guys, I think I've found the strange thing.
    First, in the recovery shell, when I type "lvm lvscan", it prints:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    and then it says that all four my logical volumes root,boot,home and var are inactive.
    So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
    I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
    The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
    Last edited by rdm (2015-01-29 21:55:44)

  • Unable to mount removable device.

    Hi,
    Just plugged my Archos media player in.  The icon appeared on the xfce desktop, but I can't read it.  I get this error message, anyone know how to overcome it?
    Unable to mount "A604":
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    org.freedesktop.hal.storage.mount-removable no <-- (action, result)
    Thanks,
    Chris.

    Cheers, skottish; perfect!
    Unfortunately it didn't solve a very similar issue here:
    http://bbs.archlinux.org/viewtopic.php?id=67317
    Dohhhh!
    Cheers,
    Chris.

  • Pcmanfm crashes when mount external device

    senario: mounted a partition in pcmanfm, pcmanfm disapears, launch my fm again and the device is mounted.
    I did this from xterm and got this:
    bash-3.2$ pcmanfm
    /home/nathan/.themes/1977-GTK-Rezlooks-Humanist/gtk-2.0/gtkrc:191: error: invalid string constant "panel", expected valid string constant
    *** glibc detected *** pcmanfm: malloc(): memory corruption (fast): 0x083d9808 ***
    ======= Backtrace: =========
    /lib/libc.so.6[0xb782a836]
    /lib/libc.so.6[0xb782cf6d]
    /lib/libc.so.6(__libc_malloc+0x94)[0xb782e064]
    /lib/libc.so.6(__strdup+0x30)[0xb7831030]
    /usr/lib/libhal.so.1[0xb796cff2]
    /usr/lib/libhal.so.1[0xb796dbdd]
    /usr/lib/libhal.so.1(libhal_device_get_all_properties+0xc8)[0xb796efe8]
    /usr/lib/libhal-storage.so.1(libhal_volume_from_udi+0xa8)[0xb7975f48]
    pcmanfm[0x808c23e]
    /usr/lib/libhal.so.1[0xb796ee3b]
    /usr/lib/libdbus-1.so.3(dbus_connection_dispatch+0x5b2)[0xb79214a2]
    /usr/lib/libdbus-glib-1.so.2[0xb798372d]
    /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x176)[0xb79d5346]
    /usr/lib/libglib-2.0.so.0[0xb79d86d2]
    /usr/lib/libglib-2.0.so.0(g_main_context_iteration+0x6e)[0xb79d8c8e]
    /usr/lib/libgtk-x11-2.0.so.0(gtk_main_iteration+0x34)[0xb7d4cb64]
    pcmanfm[0x807b805]
    /usr/lib/libgtk-x11-2.0.so.0[0xb7d50681]
    /usr/lib/libgobject-2.0.so.0(g_closure_invoke+0x129)[0xb7a647f9]
    /usr/lib/libgobject-2.0.so.0[0xb7a78efb]
    /usr/lib/libgobject-2.0.so.0(g_signal_emit_valist+0x8ef)[0xb7a7ab2f]
    /usr/lib/libgobject-2.0.so.0(g_signal_emit+0x29)[0xb7a7ae79]
    /usr/lib/libgtk-x11-2.0.so.0(gtk_tree_view_row_activated+0x98)[0xb7e4b048]
    pcmanfm[0x807b462]
    /usr/lib/libgtk-x11-2.0.so.0[0xb7d52364]
    /usr/lib/libgobject-2.0.so.0(g_closure_invoke+0x129)[0xb7a647f9]
    /usr/lib/libgobject-2.0.so.0[0xb7a78efb]
    /usr/lib/libgobject-2.0.so.0(g_signal_emit_valist+0x617)[0xb7a7a857]
    /usr/lib/libgobject-2.0.so.0(g_signal_emit+0x29)[0xb7a7ae79]
    /usr/lib/libgtk-x11-2.0.so.0[0xb7e6fbe7]
    /usr/lib/libgtk-x11-2.0.so.0(gtk_propagate_event+0xc1)[0xb7d4b5b1]
    /usr/lib/libgtk-x11-2.0.so.0(gtk_main_do_event+0x3c2)[0xb7d4c922]
    /usr/lib/libgdk-x11-2.0.so.0[0xb7bc842a]
    /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x176)[0xb79d5346]
    /usr/lib/libglib-2.0.so.0[0xb79d86d2]
    /usr/lib/libglib-2.0.so.0(g_main_loop_run+0x1e7)[0xb79d8ab7]
    /usr/lib/libgtk-x11-2.0.so.0(gtk_main+0xb4)[0xb7d4ccf4]
    pcmanfm[0x8090a22]
    /lib/libc.so.6(__libc_start_main+0xe0)[0xb77d9390]
    pcmanfm[0x805c5b1]
    ======= Memory map: ========
    08048000-080a2000 r-xp 00000000 08:03 1665179 /usr/bin/pcmanfm
    080a2000-080a5000 rwxp 0005a000 08:03 1665179 /usr/bin/pcmanfm
    080a5000-08406000 rwxp 080a5000 00:00 0 [heap]
    b5e00000-b5e21000 rwxp b5e00000 00:00 0
    b5e21000-b5f00000 ---p b5e21000 00:00 0
    b5f11000-b5f30000 r-xp 00000000 08:03 1357696 /usr/lib/libjpeg.so.62.0.0
    b5f30000-b5f31000 rwxp 0001e000 08:03 1357696 /usr/lib/libjpeg.so.62.0.0
    b5f45000-b5f49000 r-xp 00000000 08:03 1486437 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so
    b5f49000-b5f4a000 rwxp 00003000 08:03 1486437 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so
    b5f4a000-b5f4b000 ---p b5f4a000 00:00 0
    b5f4b000-b674b000 rwxp b5f4b000 00:00 0
    b674b000-b674c000 ---p b674b000 00:00 0
    b674c000-b6f4c000 rwxp b674c000 00:00 0
    b6f4c000-b6fac000 rwxs 00000000 00:08 1376256 /SYSV00000000 (deleted)
    b6fac000-b6fbd000 r-xp 00000000 08:03 1486081 /usr/share/fonts/TTF/Vera.ttf
    b6fbd000-b6fbf000 r-xp 00000000 08:03 1423625 /usr/lib/pango/1.6.0/modules/pango-basic-fc.so
    b6fbf000-b6fc0000 rwxp 00001000 08:03 1423625 /usr/lib/pango/1.6.0/modules/pango-basic-fc.so
    b6fc0000-b6fc1000 r-xs 00000000 08:03 2059493 /var/cache/fontconfig/7f5e121fb99556871935ecd63915f318-x86.cache-2
    b6fc1000-b6fd1000 r-xs 00000000 08:03 2059500 /var/cache/fontconfig/8d4af663993b81a124ee82e610bb31f9-x86.cache-2
    b6fd1000-b6fd6000 r-xs 00000000 08:03 2057275 /var/cache/fontconfig/a98d8961fa319a64d3cfd8640c79e62d-x86.cache-2
    b6fd6000-b6fdc000 r-xs 00000000 08:03 2057224 /var/cache/fontconfig/d62e99ef547d1d24cdb1bd22ec1a2976-x86.cache-2
    b6fdc000-b6ff7000 r-xs 00000000 08:03 2059496 /var/cache/fontconfig/f6b893a7224233d96cb72fd88691c0b4-x86.cache-2
    b6ff7000-b703d000 r-xs 00000000 08:03 2059495 /var/cache/fontconfig/17090aa38d5c6f09fb8c5c354938f1d7-x86.cache-2
    b703d000-b7083000 r-xs 00000000 08:03 2059494 /var/cache/fontconfig/df311e82a1a24c41a75c2c930223552eAborted
    bash-3.2$
    any ideas? i have like 7 partitions to mount from this USB mass storage drive.. and its annoying me...  : /
    thanx for the help!!
    sv

    It's probably upstream bug: http://www.gnomefiles.org/app.php?soft_id=1263
    Look at changelog: "Crashes related to mounting removable devices is fixed. (Many thanks to the patch from Mamoru Tasaka )", so wait for an update or do some ABS.
    Goodluck.

  • "iTunes was unable to verify your device" after succesfully completing recovery mode on iPhone 4

    I have an iPhone 4 which has never caused me any problems, until i updated to iOS7 it started lagging and battery didn't even last until midday (having it charged 100% in the morning!).
    In just a few days it turned off automatically and wouldn't turn on. I googled and solved it by pushing the two buttons together for about 10 seconds. iPhone revived, and all the data was intact though many people states it would've been erased.
    The morning after, using my iPhone more carefully not to have it crash again, it crashed. 10 seconds wouldn't do and I gave up, until the day after I found by surprise that the battery had run out and it finally showed some sign of not being completely dead!
    I connected the cable to iTunes and pushed the Home button before connecting the iPhone and it entered Recovery mode. Recovery mode was completed and the iPhone had to restart to complete the process. While completing I get the error message "iTunes was unable to verify your device, please disconnect and reconnect your device". And from here I don't get anywhere, so I will probably visit Apple Store and ask what can be done, but if anyone has had the same problem please share any possible solution to this problem!

    I had to contact Apple Store and make an appointment. They tried the last step suggested (which I had already tried three times) and stated that the memory had failed. They said it probably failed due to having some small issue already on the phone and then updating to a new iOS.
    They could only offer me an exact copy of my iPhone but new for 149€.

  • HT4623 I am unable to activate my 3gs after updating to ios 6.0.1

    I am unable to activate my 3gs iphone after updating its software from ios 5 to ios 6.0.1. It gives the message: "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support."
    I have read many blogs on the same problem on different websites but could not solve this issue. I am quite disappointed.

    Yes that was but it was long time ago when it was jail broken.
    Is there any solution now that I can bring it on the working path again?

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • [SOLVED]Failed to find root device after linux (3.6) upgrade on raid 1

    on a test machine pacman -Syu offers linux-3.6.2-1.
    After a successfull update the system won't boot anymore with the following error:
    [ 0.000000] tsc: Fast TSC calibration failed
    :: running early hook [udev]
    :: running hook [udev]
    :: triggering uevents...
    Waiting 10 seconds for device /dev/md1 ...
    ERROR: device '/dev/md1' not found. Skipping fsck.
    ERROR: Unable to find root device '/dev/md1.
    and the machine gets thrown to a recovery shell
    /boot/syslinux/syslinux.cfg entry:
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md1 ro md=0,/dev/sdb2,/dev/sdc2 md=1,/dev/sdb3,/dev/sdc3 md=2,/dev/sdb4,/dev/sdc4
    INITRD ../initramfs-linux.img
    any ideas?
    Last edited by whoop (2012-10-16 22:51:05)

    If I upgrade to linux 3.6 with this line:
    HOOKS="base udev autodetect pata scsi sata mdadm filesystems usbinput fsck"
    in /etc/mkinitcpio.conf, the system is able to boot.
    if I upfate to linux 3.6 with this line:
    HOOKS="base udev autodetect pata scsi sata mdadm_udev filesystems usbinput fsck"
    in /etc/mkinitcpio.conf the system is not able to boot.
    I gathered that the mdadm_udev hook was preferred but it seems to cause problems in this case.
    After I successfully upgrade (having "mdadm" in /mkinitcpio.conf) I can change "mdadm" to "mdadm_udev" and
    the system will still boot fine.
    Does somebody know what gives?
    Last edited by whoop (2012-10-16 00:13:07)

  • [SOLVED] impossible to boot (UEFI-grub2) after update

    Hi,
    problem : after update my computer refuses to boot. It doesn't get to the grub2 (actually 1.99) menu, it just says : no boot device found.
    My hardware : Asus M8Z77-V LX motherboard with 1 SSD.
    In the bios I disabled the bios legacy option to force it to boot with UEFI.
    As I hadn't moved to systemd yet, I waited to update a while(2 months).
    Last week I updated several pacakges by hand (kernel, vlc, ...) : All updates that according to me didn't involve with systemd.
    Then I rebooted and ... problem.
    I have tried a whole weekend to solve it by browsing through the wiki's but to no avail.
    I can boot with live-cd and access my SSD. All data is there. I can also chroot and do stuff.
    The SSD is partitionned in GPT as follows :
    sda1 : 1 gb fat 32
    sda2 : 20 gb ext4 root
    sda3 : 20 gb ext4 var
    sda4 : 79 gb ext4 home
    I did not do any update of my bios or changed anything on my hardware.
    It seems that my bios does not see my SSD as UEFI-bootable device anymore.
    When I installed Arch in June on my brand new computer I made a backup with redobackup (partclone) of a working installation.
    As a final ressort I put back the image I created then.
    But it doesn't work either!
    Then I updated my bios but same problem.
    My bios can see the fat 32 partition. I know this because to update the bios it looks for attached fat 32 storage and there is shows the partition .
    I there anywone who can point me in a good direction?
    Thanks a lot in advance.
    Last edited by BelgiumArcher (2013-01-08 16:20:43)

    I am sorry if I lost your confidence. I can't find any contradictory info in my post.
    The Arch Wiki-Grub 2 says that you need to boot in UEFI before you can (re)install grub2.
    As my live-cd won't boot in UEFI mode, the only option is that I make a live-usb stick and see if that one will boot in UEFI.
    But in the end it is still strange that a software update breaks my Asus UEFI-boot.
    I just found another unlucky guy with a simular problem. I'll try his solution tonight.
    http://superuser.com/questions/372962/w … ot-manager
    http://superuser.com/questions/376470/h … -grub2-efi
    I will try the live-usb method and report on it later.

  • Unable to play any music after updating FRONT ROW TO 1.2.2

    Please help, my Front Row refuse to play any music, after updating to 1.2.2 a day ago.
    it shows all the folders in the iTune and the playlists but none of the songs in the folder, you keep pressing play and pause button and it TAKE YOU TO A shufle and the n ext one massage says "A PROBLEM HAS OCCURED".
    It play the music videos and movies fron Front Row.
    Please anyone enlighten me with your wisdom.
    L. Namgyal
    iMac inTel   Mac OS X (10.4.7)  

    Hi
    I have the excact same problem, however the problem is in my case not the upgrade in Frontrow, as the trouble was present before aswell. Everything works fine for me ONCE, but if i return to my desktop after having activated frontrow, and then reactivate it, i get the same error as you. I can solve the problem by Quiting FR and then relaunching it again, but this is not acceptable.

Maybe you are looking for