Nothing to Inspect After Importing Media

I have been importing media to do tests on converted footage. Everytime the media was imported, there was nothing to inspect. I waited for the import to be 100% complete, but still nothing. I keep my final cut files on an external, so then I tried importing files from my desktop...nothing. Then I tried importing the raw files, thinking I got my compression wrong...nothing. They are .mov Apple ProRes (LT) files, and this is the first time I have had this problem because I have
done numerous edits in the past. The name of the project is Josh Twixtor Test in the below image (even though I never got to Twixtor, that is the name of the project. Thanks in advance, I appreciate any help I can get.

The files are in the final cut original media folder, on the external (mandog 1), and the clip runs fine. But for some reason final cut says nothing to inspect.

Similar Messages

Freezing after importing media - Final Cut Pro 10.0.9

Whenever I import media, the import window closes and leaves the final cut screen darkened and frozen. I searched and saw someone had a similar issue when something plugged into their firewire port was interfering. Nothing is plugged in in my case. This is pretty annoying. If I restart the program the media I imported is there, but it's going to suck to have to QUIT the program every time I need to import media....
To be more specific it doesn't matter where it is or what kind of file. It could be a jpg from the desktop, doesn't matter. Just freezes..
Running OSX 10.6.8
Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i3
Processor Speed:          3.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          8 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          IM112.0057.B00

Final cut screen is dark. The top menus (file, etc) are accessable but do nothing. All other apps run fine. When you click on FCPX in the dock, it shows that the media window is still open, but it isn't.

Video and audio do not sync after importing media into Premiere Pro

After I import my video which is in the .MOV format, I notice that the video is slow and out of sync with the audio. This makes it incredibly difficult to edit. Any and all solutions will be helpful.
Sincerely,
SheIsInquisitive

John:
Thanks for your reply. Excuse my referring to you as "Kevin". I'm new to the Adobe Community. I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself. I'm going to try both solutions. Whichever works I'll be sure to reply to the thread with my findings. I found this article which provides the following solution: http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

Premiere Pro CC crash after importing Media

Hello,
I'm using the trial version of Premiere Pro CC. I've used it for this week without any problem importing just pictures.
Today I've imported videos and suddenly it started to crush after each importation. Now I can't import even pictures anymore.
I've checked on the forum and I've noticed that sometimes the problem is fixed just changing from General and change the GPU Acceleration to Mercury Playback Engine (software only), but it doesn't work for me.
Windows 7 Professional
Processor - Intel Core i5 4570S
I work with deadlines so I would really appreciate some help

For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
-and a fix for at least "some" ATI crashes https://forums.adobe.com/thread/1553342

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

How do I delete the media after import from camera?

How do I delete the media after import from camera?

The usual procedure with video is you backup the card contents onto an archive drive. You import from the archive drive making a copy (professionals on set make two copies), and once the backups and import are verified, the card is reformatted in the camera.

My video gets pixilated after importing in Premiere pro cc 2014. I've try to change settings but nothing happens.

My video gets pixilated (specifically the text on the video) after I import it in premiere. I don't think it's because of my editing because when i'm previewing a video after importing it the video is already downgraded and the text are so pixilated. I hope someone could help me.
Thank you in advance.
God bless

Here is the sample sir. I'm editing one of our church event and this is what i encounter.
Here is the info of the video as i click the properties of it in Pr:
Type: QuickTime Movie
File Size: 18.5 GB
Image Size: 720 x 486
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 24 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:59:46:29
Pixel Aspect Ratio: 0.9091
Video:
There are 107609 frames with a duration of 1/29.97th.
Video track 1:
Duration is 0:59:46:29
Average frame rate is 29.98 fps
Video track 1 contains 2 type(s) of video data:
Video data block #1:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)
Video data block #2:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)

Crash after attempting to import media

I just purchased elements 9, and I tried importing media from my DV camera. Every single time I did that, I got some crazy looking error. I have included screenshots of the error.
The page these images are on was a page I was looking at to try and figure out where the crashes are coming from. I had already contacted customer support, and they said uninstall and reinstall everything. So, I did that and still the same thing.
I have a Windows platform, XP, AMD Phenom II X3 720 processor, 2.81 Ghz, 2 GB RAM,
I don't know what other information might be relevant, but this editor is essentially worthless if I can't import media from my camera.

Well officially you should be able to run with 1GB (2GB for HD editing), but empirical evidence shows that that is quite unrealistic. A minimum 4GB RAM + Quad-Core processor and multiple fast hard disks are pretty much essential for AVCHD editing.
But feed it DV-AVI Type 2 files and PRE on 2GB ought to work for you, especially if you work through Clean, Lean & Mean Editing Machine - One Workflow.
And in case you haven't seen the basic tips:
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.8 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Final Cut Pro X won't import media or create new projects?

I have tried restarting my computer, updating softwares, and deleting layouts etc. I was using FCPX today, but after I deleted all my projects and files from the program (like I do when I want to clean it up), it showed "create a new project" and "Import Media" or something along those lines. When I click on them (or try from other routes) they either do nothing or work a little and then do nothing, but never actually compeletly work. Please help!

Have you tried trashing the preferences with
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Importing media file(MP3) fail

So i was going to run through some test's so I can get some basic lipsync. I recorded some audio and then proceeded to import. i when to file, imported and then clicked the file. after it loaded, nothing happened. Can someone explain this?

hi!
what?
2010-03-16
Fang
发件人: joekuli <[email protected]>
发送时间: 2010-03-16 13:44
主题: Re: Importing media file(MP3) fail
收件人: fang alvin <[email protected]>
hello?

Cannot edit chapter names in iDVD after importing movie from iMovie

I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

VJK,
You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
You will be able to change the names in the menu, but
depending upon your mouse, etc, it can be a little
particular.
Place the cursor at the very beginning of the word
you want to change. Click once .. this should hi-lite
the word. Click again, it should make the word go
blue (or in a blue box) then you can delete and
re-type.
Be sure to save the proj
I have found that even after saving and successfully
burning the project, if I return to it later the
changes seem to have gone away ... so if you go back
to it later, just double check that everything is
kosher

Problems still after adding Media Feature Pack (win8.1, 64bit, c660d)

Hi guys!
I.m just after installing win8.1 pro N to my Toshiba Satellite C660D laptop, it was a clean install directly from win7 (so no 8 meanwhile), i updated everything just after install, also the newest Media
Feature Pack (6.3-KB2835517-x64) update to have media content too.
The following problems I had:
still nothing that helps me in media parts (no media player, no sound recording, no webcam-i couldn.t see its place in device manager either)
i couldn.t install one update (error code: 0x80070003 )
and some appeareance problems, might due to the lack of video card driver
and some smaller background missings.
So i.ve installed drivers (it was a collected driver pack by Toshiba, directly to help upgrading from 7 to 8), which made my appereance running good, all the installs came down and installed - but still no media pack (no
player, no mic, no webcam).
If I want to install again 6.3-kb28355.... it tells me that i.ve already did it.
The errors i still have at system logs: some services cant run "the system is configured to not allow interactive services.", and "The server did not register with DCOM within the required timeout." Also
some warnings: "WLAN Extensibility Module has stopped." and "The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM.........", this last one is from source "Kernel-Pnp"
Update Troubleshooting tells me that "problems installing recent updates" is Not Fixed, also
SFC Scan (same time at the Command Prompt too) "did not find any integrity violations". However
checkin the updates it comes that I have installed all the recent updates (everything is green and happy)
Since yesterday i.ve tried many many possible solutions; these above are from the last reseting of windows (so there shall be no other disturbing factors in the background (?) ). Please if somebody has any idea what a) happened b) shall i do to fix. Is there
one problem here that might causes the others, or is it more difficult..?
Thanks for listening,
cheers
totto

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

IPhoto 7.1.5 - Disappearing Photos After Import of New Photos

This is a revisit of an earlier problem that has been addressed in several discussions. The problem is reproducible.
Background: Running 10.6.7 and iPhoto 7.1.5
I have a 14 GB Photo Library with > 10 thousand photographs. After importing another 100 photos, iPhoto AGAIN showed ONLY the latest event photos. Closing iPhoto and reopening iPhoto shows all of the events for ~1 sec and then "poof" the photo library says that there are 0 photos. I have followed the instructions in numerous discussions including my earlier post. Nothing works permanently.
SUMMARY: Repeated rebuilds of the photo library with iPhoto Library Manager (iPLM) bring the events/photos back until the next photo import. Then I am back where I started.
I have done the following:
1. Booted on the startup CD and checked and repaired all disk permissions (many) and other disk errors (none).
2. Made a backup of the photo library.
3. Rebuild photo library in iPhoto. No joy. This NEVER helps anything.
4. Deleted pLists and opened iPhoto. No help.
5. Ran BatChmod to check on all of the permissions to RW. No permission problems are seen now.
6. Ran iPhoto Library Manager and confirmed permissions set there are OK. It is important to make sure that the permissions are set correctly to RW in iPLM.
7. Ran iPLM and I can access ALL of the events and photos. (This is where the last discussion ended.)
8. Imported more photos from my iPhone and “poof” no more photos seen in iPhoto. I Go back to step 7 and wait 1.5 hours for a rebuild in iPLM.
Any further suggestions would be helpful. This is occurring after EVERY import of new photos. As long as I do not import more photos I can access all events and photos.

Tony:
It could be that the card has been compromised and iPhoto doesn't recognize it. Open Image Capture and see if you can upload the photos to a folder on the desktop. If that can be done reformat the card with the camera, take a couple of test shots and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

In IE I used different levels of folders for my favourites. After importing I miss the bookmarks of folders within folders within folders etc.

In Internet Explorer it is possible to organize favourites with folders as in firefox. In these folders you can make new folders and within those new folders. Can this tree structure be used in Firefox? After importing most of my favourites are gone, I can find no folders within folders within folders etc. So most of my favourites are not imported from IE.

Thanks for the helpful thoughts LarryHN. I'm having a Mac guy look at my MacBook Pro in the next day or so to see what he can find out. I described the issue on the phone... and like you, he said that saving my documents to a thumb drive shouldn't affect my iPhoto library.
One reason I bought the thumb drive was to back up my iPhoto library, but the time I got to that, it was already gone. I've thought of getting Time Machine (and have checked out other systems), but the reviews are so mixed, I'm dragging my feet on coughing up the cash right now.
When I launch iPhoto, I only see the last few weeks' worth of photos. Oddly, photos I imported 3 weeks ago appear, but are in a folder dated November 2012--when I know I took those and imported them in January 2013. So that's weird...
When I got to iPhoto Library, I have an Auto Import folder with nothing in it. "My Pictures" folder has nothing as well. I did hold down the option key while opening up iPhoto, but only my recent library (a few weeks' worth of photos) appears. I'm using iPhoto 2011 (6.2.3). I can only hope my Mac guy can help...

Categories Column Missing After Import

After importing some photos from my camera my iPhoto window is left in a strange state which I cannot seem to get out of even if I restart iPhoto or reboot the machine. It doesn't show the categories on the left at all and it shows a big blank grey window on the right with nothing to click on. The bottom shows all of the usual controls (Split, Edit, Rotate, Hide, Flag, Book, Calendar, Card, Web Gallery, Email, Print, Order Prints, and iWeb and below them add, info, fullscreen, play, search, and the thumbnail scaler). I was at one point able to fix this somehow by going into Time Machine and doing something (I know not what) and it went back to normal when I returned but I can't seem to replicate the effect now. Help!

Brian
Move your cursor to the extreme left of the iPhoto Window until it becomes a '+' then click and drag right.
If that doesn't work, try trash the com.apple.iphoto.plist file from the home / library / preferences folder
Regards
TD

Nothing to Inspect After Importing Media

Similar Messages

Maybe you are looking for