Nothing to report

I feel I'm missing out on something. FCP 5.1.2 and QT and OSX 10.4.8 and Motion 2.whatever and Shake 4.1 and all my Adobe apps are purring along just as well as can be on these decrepit PowerPC Macs that I have. I'm glad my torpidity has gotten the best of me and I did not go to the extreme effort to update to 5.1.3
I'm sure Apple and other developers will get things worked out, it's just a pain until they do.
Zeb

you have clearly not read the manual correctly, remember 'search' is your friend. and also remember that these forums are here for people to be sharing, caring and non-elitist!
quad 2.5ghz g5, 4.5 gig ram Mac OS X (10.4.7) G4 powerbook 1.67gHz, 2gig ram

Similar Messages

[Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
                Operation = "ExecQuery";
                ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/

Crystal report 2008 SP3 Ver 12.3.1.684 application crash on runtime

hi all ...
i have problem running my report using crystal crystal report 2008 SP3 Ver 12.3.1.684 .. it stop responding while i click preview the report ... and my report is connect to ODBC database source provider.. the crystal report will crash while connect using ODBC(RDO) but other than that all work fine ...
here is the error log while try run the report ..thx and pls help as i am no idea for this .. and this report is come one of my SOLOMON SL 2011 while i want to edit my existing crystal report
Description:
Stopped working
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     crw32.exe
Application Version:     12.3.1.684
Application Timestamp:     4c3ddcf1
Fault Module Name:     ntdll.dll
Fault Module Version:     6.1.7601.17514
Fault Module Timestamp:     4ce7ba58
Exception Code:     c0000005
Exception Offset:     0002e3fb
OS Version:     6.1.7601.2.1.0.16.7
Locale ID:     1033

I have about the exact same error and it happens when I hit refresh to update the records. When I go into the Formula Workshop, there is nothing in Report Custom Function. Can you give me a little more detail on how you fixed the problem.
Thanks.

Crystal Report 10 and Visual Basic 6 - logon failed in crystal report viewe

Guyz,.
Report viewer is showing logon failed, pelase help me, i can able to view the data from rs1(recorset).
please hellp me to fix this issue, i need to pass the sql query to my pre designed Crystal report which has all the field as same as SQL query.
Please suggest me if any other alternate way to do this , my code is below.
Environment : Crystal Report 10, Visual Basic 6
cr_preview -> CrystalActiveXReportViewer
RepName -> Fiename and path of the Crystal report is designed from Crystal Report Designer.
Function show_rep(Sql As String, RepName As String)
Dim crystal As CRAXDRT.Application
Dim report As New CRAXDRT.report
Dim rs1 As New ADODB.Recordset
    If rs1.State Then rs1.Close
    rs1.Open Sql, cn, adOpenStatic, adLockReadOnly
    Set crystal = New CRAXDRT.Application
    Set report = crystal.OpenReport(RepName)
    report.DiscardSavedData
    report.Database.SetDataSource rs1
    'cr_preview.Refresh
    cr_preview.ReportSource = report
    cr_preview.Visible = True
    cr_preview.ViewReport
    Do While cr_preview.IsBusy
        DoEvents
    Loop
    cr_preview.Zoom 100
    If rs1.State Then rs1.Close
    Set rs1 = Nothing
Set crystal = Nothing
Set report = Nothing
End Function

Hi,
Please refer to the link for the list of example, [click here|http://pscode.com/vb/scripts/BrowseCategoryOrSearchResults.asp?optSort=Alphabetical&lngWId=1&B1=QuickSearch&txtCriteria=crystalreport+10&blnWorldDropDownUsed=TRUE&txtMaxNumberOfEntriesPerPage=10&blnResetAllVariables=TRUE]
Regards,
Clint

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

ISE Guest Activity Report not working (1.2.0.899)

Recently I upgraded an ISE to 1.2.0.899. I found the Guest Activity Report is not working. Before the upgrade it was working properly (with the limitation of 5000 records by report). Nothing in the ASA was modified, but nothing is reported in the ISE; also I use the tcpdump integrated in the ISE to validate the syslog messages are arriving from the ASA to the ISE. I already enable the Passed Authentication logging category.
Do I need to modify something else,to have the report?

Hi
Please make sure these steps has configured correctly:
Step 1 Create an alarm, as described in Creating, Editing, and Deleting Alarm Schedules.
Step 2 Specify a rule for Passed Authentication, Failed Authentications, or Authentication Inactivity for all users of type guest, as described in Creating and Assigning an Alarm Rule.
Step 3 Calculate guest user activity by Monitoring Live Authentications.

Problem with Non Cumilative key figs at report level.

Hi Gurus,
I got an issue with the below keyfigures when I tried to display them in the report Stock Overview.
0TOTALSTCK
0VALSTCKVAL
0QMSTOCK
0TRANSSTOCK
0BLOCKEDSTK
0CNSSTCKQTY
These keyfigs are non-cumulative keyfigures. I wonder why these keyfigures show nothing at report level. The cube is IC_C03 which has the datasources 2lis_03_BX, 2LIS_03_BF and 2LIS_03_UM.
Please help.
Regards,
Sasi

Did you initialize the inventory properly?
Check if inflow and outflow exists in cube for the values you are trying to execute the report

I am not sure how to use this site but here goes nothing, I recently lost my Iphone and dont have the App to locate it. is there some other way to lock the phone with a serial number?

I need help locating or locking my Iphone its been stolen.

No.
The only way would be if you had turned on the find my iphone feature in the iphone settings.
The app that you download has nothing to do with it. The feature is bult in.
If you did not turn it on, then you can do nothing, but report it to the police and your carrier, and change your passwords.
Sorry

Office Telemetry Agent Last Run Result 0x800700005 and machines not reporting back in the Telemetry Dashboard

We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.

I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks.

MDX Generation Issues (using Evaluate) in OBIEE Analysis Report

Hello Everyone,
I am trying to use Evaluate function in MDX (on a OBIEE 11g Analysis report) to restrict the number of values that i am pulling from the Essbase cube. The MDX Evaluate syntax looks something like this
EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Accounts"."Gen10,Accounts")
EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Products"."Gen10,Products")
I am putting the above evaluate formula in the "selected columns" on the OBIEE Analysis report. So i am pulling accounts, products and the measure from the essbase cube.
However I am getting the following error when the analysis report is run
Query Status: Aggr Essbase Error: *Repeated dimension [Accounts] in MDX query*
Do we need any configuration changes/ settings on the RPD model to ensure we dont get this error?
Regards
Aby

Hi veeravalli,
Thank you for you reply. I got it.
However, any idea to solve the issue?
I tried to do it in RPD by case when,
e.g. Acutal Sales: case when scenario='Actual' then salesamount end
Budget Sales: case when scenario='Budget' then salesamount end
Actual/Budget%: (Actual Sales/Budget Sales) *100
So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
Thanks.
BCHK

Essbase data crossjoin error in OBIEE analysis report

Hi all,
Anyone got the following error in OBIEE analysis report:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Syntax error in input MDX query on line 13 at token 'crossjoin' (HY000)
The OBIEE version is 11.1.1.6.2
Data is from Essbase Cube, version 11.1.2
The report is a simple cross tab table and we added 'After' aggregation to show grand total.
The error show up when we drill down on dimension, click '+'.
However, if I remove the 'After' aggregation. There is no error at all
Thank you
BCHK

Hi veeravalli,
Thank you for you reply. I got it.
However, any idea to solve the issue?
I tried to do it in RPD by case when,
e.g. Acutal Sales: case when scenario='Actual' then salesamount end
Budget Sales: case when scenario='Budget' then salesamount end
Actual/Budget%: (Actual Sales/Budget Sales) *100
So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
Thanks.
BCHK

TestStand 3.5 is not reporting step results for under three steps

Is there a minimum number of steps that need to return results from a called sequence in order for them to be reported?
Here a description of my problem:
My main test code calls a sequence file that contains a varying number of test steps in the Main section of the sequence file. There are also some Setup and Cleanup steps that do not return results to the main test code. When my number of test steps is at least three, everything works fine and all test step's results appear in the report. When my number of test steps is less than three, no results are shown in the report. In addition, if I record results of a miscellaneous step in the Cleanup section and have two test steps in the Main section (so a total of three steps returning results to the main test code) then the results appear in the report.
I verified that this was not particular to my piece of code by creating two new sequence files: one with three steps (Test 1, Test 2, Test 3), and one that calls the first. When at least three steps are present, the results of each step are recorded, but when I erase Test 3, nothing is reported.
Any help would be appreciated!

Hi,
Please find attached an updated report sequence file.
The problem was because you had skipped the Sequence Name steps. This adds two extra lines to the report. Therefore in the precondition of 'Remove Empty Sequence Results' step, the expression was still deducting these two lines, which longer exist in the report. Hence the reason why you were lossing the step results in the Sequence.
I have removed the -2 from the expression.
Hope this explains everything for you.
Regards
Ray
Regards
Ray Farmer
Attachments:
reportgen_txt.seq ‏159 KB

Do I have to report my lost ipod touch 4G. Its serial number is already registered with apple. Any help to find it will be apprecitated

Do I have to report my lost ipod touch 4G?. Its serial number is already registered with apple. Any help to find it will be apprecitated.

You can't track it with the serial number. If you had an iPod Touch running iOS 5 later AND set up Find my IPod on it, then there is a chance you might be able to locate it by going to www.icloud.com, logging in with your Apple ID and clicking Find my IPod. Of course, the iPod still needs to be on and connected to a Wi-Fi network in order for it to be located.
If nothing else, report it to the police and change any and all passwords to any accounts you set up or used on the iPod.
Apple otherwise cannot help you.
B-rock

CFR File Does Nothing

I have two machines running Windows XP and CFMX 7.02
Developer Edition. Neither will display a CFR report. No errors are
encountered, the page is just completely blank. No Flash Paper, no
PDF, nothing. Report is just a simple query against a DB to test.
Testing the query in the report builder returns valid data. Used
the wizard to create the report. .CFR files are configured in IIS.
Preview in report builder behaves the same. Calling report from CFM
file using <cfreport> behaves the same.
Any ideas? TIA.

In report builder I create a new report, using the wizard. I
use query builder to access a local access database and just select
a couple of fields. I test query and it returns data. I proceed
with the wizard, accepting defaults for everything else. I save
report. I preview report. Preview window completely empty. I try to
access report via url to .cfr file. Empty browser window. I copy
.cfr file and database to different machine and run it via url
there. Same thing. I create .cfm page that does a query then uses
<cfreport> tag to call report using just returned query
(which I've cfdump'ed and it returns expected data). Same thing,
empty browser window. I view source of browser page. Completely
empty.

All reports fail in ARD 2.2

I'm unable to get any reports at all in ARD 2.2 and 10.4.11.
It just waiting and waiting and waiting, but there's no answer. "In progress. Waiting for report data." But nothing ever happens.
Everything under the "Manage" menu works, but nothing under "Report".
Any ideas?

One possibility: If you are trying to get a report from a machine on another segment port 3283 (TCP/UDP) must be open. I'd try grabbing a report from a machine on the same switch as your admin console. The report should come back in under 5 mins. if it's working. This would help rule out a damaged db.
If you are on the same segment and/or the report still doesn't work try reselecting the option in Sharing on the client machine to allow the user to make reports (can also be done by sending the Change Client Settings command in ARD).
If you do reinstall, I suggest using: http://docs.info.apple.com/article.html?artnum=108021; missing items on this list may mean you don't get a clean install of the db. Sadly, I know this from experience...Doh!

Nothing to report

Similar Messages

Maybe you are looking for