Nothing working between several AirPorts and Netgear SRX5308

I've recently set up a network at work that consists of a Netgear SRX5308 router, 2 AirPort Extreme Base Stations, and 4 AirPort Expresses. All of them are the latest generation. The Netgear has the capability to have at least 4 VLANs and I've chosen to set up 2. One for a wired network that goes into a switch and the other that goes to my first AEBS. The wired network has static addresses (No DHCP) and is on the 192.168.0.1 network. The wireless network is 192.168.1.1 and also has DHCP turned off. The address of the AEBS is 192.168.1.2. Then I have "share a public IP address" turned on so I can feed another smaller switch DHCP for a 2nd AEBS and 4 more AirPort Expresses. The other AirPorts have static IPs and my DHCP range is high enough to allow for static routing. Originally my network was working with this configuration. Now I get a Double NAT error. This was working for a week or so then decided not to work.
I decided to change things up and turned on DHCP for the 192.168.1.1 network and set each AirPort on the same subnet by turning on bridge mode. All of my AirPorts have a green light yet I still don't get an internet connection. Should I have a separate subnet mask for each
I'm using OpenDNS for my DNS servers for my initial WAN set up. Also the wired network works just fine. It's just the wireless giving me h3ll. I can't think of anything else I could be doing wrong. Any ideas? I'm at my wits end. Should I have a different subnet mask? I'm using 255.255.255.0 for both VLANs.
Thanks,
Scotty

#1 As addressed in http://www.dslreports.com/faq/12506
The DHCP Server in the secondary router should be off.
#2 You only forward from the main router directly to the computer that you want to host on.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Port Forwarding not working between Fios Router and Netgear R6200 AT ALL

For the past two days I've been trying to forward port 80 and port 9000 from my Fios Router to my new NetGear R6200 Router and absolutely nothing is working. I need these ports open and forwarded as I need to forward them to my surveillance system from my R6200. The problem is that port forwarding is not working AT ALL. I've literally tried EVERYTHING. I turned my firewall off completely, enabled DMZ, changed my R6200 to a static IP, turned off uPnP on both sides, and reset my router to factory settings. I'm all out of patience and ideas. This is exactly why I went out and bought the R6200 in the first place, Verizon's Routers are atrocious.
Hardware:
First Router (Gateway): Verizon Fios Aciontec MI424WR
Second Router: NetGear R6200 Dual Band 802.11AC Router
Surveillance System DVR: Zmodo H9114 DVR
OS: Windows 8 Pro 64-Bit
At this point I'm willing to try anything. Fios customer support knew absolutely nothing and wasted my time and if a tech is sent to my house I'm sure the same exact outcome will occur. I recall someone saying that cloning the MAC of a different REV. worked for them but I don't recall the details. Any help would be greatly appreciated.

#1 As addressed in http://www.dslreports.com/faq/12506
The DHCP Server in the secondary router should be off.
#2 You only forward from the main router directly to the computer that you want to host on.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Icloud sync only works between mac pro and windows outlook, not with iphone and ipad anymore

Hi
Can anyone help me with my problem?
I do have icloud installed on my MacBookPro, on my Windows Outlook computer, on my iPad 2 and on the iPhone 4S.
Now until yesterday everything synchronized perfectly well.
Then I created some groups on my MacBookPro address book and since then (I believe that was when it started) icloud no longer synchs from and to the ipad and the iphone. It still works between the Mac and Windows Outlook.
On the iPad/iPhone I have tried everything but it still won't do. I have even reset the whole iPad and obviously lost all data and tried again. I all sometimes get is a few contacts back into the address book on the ipad. But only a limited number, not all.
Also, to delete the icloud account on the ipad/iphone is sometimes not possible. It just hangs and I can see the message "Deleting..." for ever.
Anyone an idea?
Thanks in advance!

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

I just bought OS X Lion and now it says I need to go to the App store and pay even more money to get a newer iPhoto for PhotoStream to work between my iPhone and my computer. Is this a rip off to make us pay more $ or is thereanotherway to update iPhoto?

I just bought OS X Lion and now it says I need to go to the App store and pay even more money to get a newer iPhoto for PhotoStream to work between my iPhone and my computer. Is this a rip off to make us pay more $ or is there another way to update iPhoto?

Yes, you’ll need to upgrade to the latest version of iPhoto for $15. That is the only solution. You can read here if you wish: http://www.macworld.com/article/160380/2011/06/icloud_what_you_need_to_know.html

TS1630 No sound is working on my music or videos. Nothing works when i try and turn it up. But it works when selecting ringer

No sound is working on my music or videos. Nothing works when i try and turn it up. But it works when selecting ringer tone

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.

My time capsule worked for several weeks and is now telling me backup disk not available? What to do?

My time capsule worked for several weeks and now is not backing up. Tells me backup disk not available? Any suggestions?

This is a lion bug..
Generally just rebooting the TC will get it back. Otherwise you need to reset the TC and redo its setup.
Tell us a bit more.. but there is as yet no work around or fix for lion.
Certain things help.. but wireless is also a weak link. It will generally work better by ethernet.
Try and get back if it is still bugging you.. I can suggest some other things.. but I do not know of or read a bullet yet.
(Snow and TC firmware 7.5.2 which I run do not have this issue.. so the bug was introduced with Lion and 7.6 firmware)

AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I do?

AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

HT5621 I changed my ID Apple with another email, i received the confirmation, i changed my password and also received the confirmation but when i try to download something on my iPhone it still shows me my okd email and nothing works ! ahhhhh what and how

I changed my ID Apple with another email, i received the confirmation, i changed my password and also received the confirmation but when i try to download something on my iPhone it still shows me my old email and nothing works ! ahhhhh what and how do i solve this ?

On your iPhone go to Settings > Store.
Select the Apple ID at the bottom.
Select Sign Out at the menu selection provided.
Follow this by signing in with your new Apple ID/iTunes store account.
All apps - all paid and free apps include DRM protection which is tied to the iTunes account that was used to download the apps. In order to install an app update for the apps downloaded with your previous Apple ID/iTunes account, you will need to use that account and password.

Will Facetime work between ipone 4 and Macbook Air?

Will Facetime work between iphone 4 and Macbook Air?

yes between any mac and every ios device with a frontcam

IMessage is not working between the computer and the iPhone 4S?

My I message is no longer working between my computer and my iphone 4s, how do i fix it? It has been working but stopped communicating with each other. I have osx 10.9.3 on Mac and 7.1.1 on the phone.

imessages have never ever been able to work between devices that use the same appleID

HT4783 why can't airdrop work between iOS (iphone) and OSX (Mac Computers)?

why can't airdrop work between iOS (iphone) and OSX (Mac Computers)?

NNot sure if anyone help you resolve this or if it works with Mavericks but with Yosemite I couldn't send From iPhone 5 or iPad mini 2 because my Macbook Pro wasn't able to be seen via AirDrop. After a grueling 4 hours with support and factory resets of both devices I was transferred to the CPU Support team, which resolved my issue in about 3 mins. Needless to say I wasn't happy but figured I should help anyone else in the same boat as me. I have both devices operating on iOS 8 and MacBook pro rubbing Yosemite.
1. Open Finder Window -> Airdrop -> Change setting for "Allow me to be discovered by:" to no one and close the finder window.
2. Go To Apple Logo -> Force Quit -> Select Finder from App List -> Force Quit.
3. Open Finder Window -> Airdrop -> Change setting for "Allow me to be discovered by:" to everyone and try to send file from iPad / iPhone to computer.
This process allowed the computer to be seen / recornized on the iOS deVice. Hope this helps.

How do I make iCloud work between my Mac and my iPhone as suggested in the video's on Apple's website ?

I'm trying to share a set of Numbers projects between my MacBook and my iPhone.
I notice that iWork.com does NOT do what I am expecting from the Apple Video's : it only allows me to consult documents through Safari, but not to open one directly from iCloud.com in the appropriate app for editing ...
Through file sharing in iTunes it seems to work for one of the projects ... but another project which has multiple tabs and rather long tables doesn't open on my iPhone due to "unknown error" ...
Even then, the iTunes file sharing process can hardly be called seemless, and in no way even approaches what is suggested in the video's :
The video's suggest that when working on a file on one device, then picking up another device the file will show the changes ...
In reality here's what I have to do to make a change on the file on my Mac, share it with the iPhone, then change something on the iPhone and share it back with my Mac :
1. save the changes to the document
2. add the document to iTunes file sharing
3. sync my iPhone
4. open Numbers on my iPhone
5. add the document from iTunes
6. open it
7. make a change
8. sync the iPhone
9. choose "save as ..." in iTunes to overwrite the copy on my Mac
10. open the document in Numbers on the Mac
Guess what ... when making a new change, I have to go back in iTunes, delete the link to the document and add the document again in order to be able to share the change ...
I would expect the syncing with iTunes to at least take care of the file updating on the respective copies on Mac and iOS device ... apparently not so.
Anyone knows how to really make Documents In The Cloud work ?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

I can't get a thunderbolt connection to work between my iMac and new macbook air

I would like to establish a connection between my iMac and new macbook air using a thunderbolt connector. Nothing seems to happen when I plug the cable in to each device. When I open Settings/Network it shows up the Thunderbolt bridge as 'Not Connected' on the MacBook and as 'Some Connected' on the iMac. I have no problems with connecting another device (iPad) to the iMac. Can anyone help please?

Nothing happens when I try to boot up using the command+R keys.
Did you hold down those keys before booting and continue till you get to a selections window? You should get this:
If you can't boot into the Recovery volume make an appointment with the nearest Apple Genius bar for a diagnosis. You're still under warranty.

Nothing working between several AirPorts and Netgear SRX5308

Similar Messages

Maybe you are looking for