Nothing works but the Hold switch

basics my ipod 30gb is dead
the wheels doesnt work
play/pause , menu, nothing works
so i guess the input is dead
except the hold switch still works
the LCD turns on when i switch it
so..
anyone helps me plz??

Connect it to your computer and Restore it in iTunes.

Similar Messages

  • IPod nano gen 4 forward button won't work, and the hold switch won't either.  I've tried restoring it and it didn't fix the problem. Any suggestions?

    The forward button won't work and the hold switch doesn't either.  I tried restoring it, but that didn't work.

    Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

  • I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

    I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise?  During installation emptied cache, etc. Backed up using time machine, fortunately.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

    My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

    Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I installed ios7 last week. The Safari screen is blank, and nothing works in the Search bar. Problems with facetime the previous day, but that is solved. What's up with Safari?

    I installed ios7 on the iPad last week. Problems with factime, but solved with online support. Now the Safari screen is blank, and nothing works in the Search bar. What's up with that? All other Internet uses are working.

    Hi, a too full hard drive can really mess things up.
    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, , try to clear at least 10 GB of space & empty the trash, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • 4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Display suddenly changed I have tried changing in utilities but nothing works.  The print is enormous and out of focus the screen has shrunk in width but programs open too stretched in length? What can I do?

    The display suddently changed two days ago.  Everthing exploded in size.  I have tried changing the contrast but nothing works.  The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus.  What can I do please   I am really disappointed since my iMac is only 2.5 months old.

    Don't think so.  But tried it anyway.  I have been into utilities and tried different contrast settings now I don't know what is the right one.  But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black.  What is going on?
    Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
    Any ideas Capt?

  • When i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos.

    when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT A ROUTER PROBLEM. all my other apple devices dont have this problem

    iOS: Importing personal photos and videos from iOS devices to your computer
    iOS: Unable to import photos or device not recognized as a camera

  • Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

    Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

    Did you restore from backup?
    Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

  • Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files,  and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

    Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files,  and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

    OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it    Can not believe it was that simple. I am one happy person again.....

  • The Hold Switch is Messed up

    I was listening to music and went to change a song then it looked like it was frozen so i switched the hold button thinking that was it, but it fixed itself in a few minutes. Then when the iPod came back on it said the hold switch was turned to on but it wasn't. Now i cannot do anything with it!!
    IBM Thinkpad   Windows XP Pro  

    Restart your ipod. Turn hold switch on and off (even though your pod says its on, it might work) then hold the menu button and the middle button at the same time for ten seconds. It doesn't need to be connected to your computer. If you don't get it, refer to the documentation that came with your iPod.
    If it doesn't work, restore it. If not, then we have to go a step further.
    If you're still under store warranty, find your receipt and replace it.If not send it in to Apple. If you're still under warranty with them, they'll fix it for free. If not, then I'm not sure how much it'll cost, but probably from 20-50 dollars.

  • Trouble with the Hold Switch

    I was using the Hold switch without a problem since I got my mini last June. Just recently the Hold switch starting acting up. First it was staying engaged after I switched it off - I know this because I can connect it to my computer and when it is recognized and lights up, I can see the locked icon. After I disconnect it from the computer the screen is blank and doesn't respond - can't reset it either. After an hour or so though it finally seems to become unstuck and I find it turned on by itself.
    Now the latest "mind of it's own" thing is that while I'm playing songs, the locked icon will come on intermittenly. I've looked for articles and questions but don't see this problem. Any suggestions?

    For a couple of weeks I worked around this by turning
    off the hold switch about an hour before I wanted to
    use it, and it would turn on.
    I had to charge it this weekend, and since, I can't
    get it out of the hold mode. Again I can tell it's
    locked because when I connect it to the computer (and
    the hold switch is off, I can see the locked icon.
    Any body else experience this kind of hold switch
    problem??
    I am having a problem with my ipod 4th gen. It will not get out of hold. The closed lock stays in the upper bar of the iPod.
    I toggle and toggle - to no avail. Help. I do not want to buy another. I got it 12/2004.

  • Using the hold switch is crashing my iPod

    Okay, I just got the 8gig 4th gen iPod last week.
    I stuck it into the iHome and listened it for a while, ignoring the message that said the ipod cannot charge from this device.
    I pulled it out, and it went all fritz on me, starting to turn on on its own (on about 10 minute intervals), and I turned it off every time it did. Sometimes my keys didn't work, so I tried everything, including holding the menu and the center button.
    After failing to reset, I slid the Hold switch to HOLD and back again, and this time it worked.
    It worked on restarting my iPod, but now every time I turn the Hold switch off (not when I'm putting it on hold), the iPod restarts. How can I fix this?

    Okay it seems like our iPod might be frozen so try holding the center and play buttons together for about 10 seconds. That would basically restart it. If you are able to turn it on again and you still don't have your stuff then it should be on the computer so just restore and sync it.

  • Screen isn't working, but the ipod does!

    the screen is totally black with a lime green line and a blue line next to it on the left side.
    i click menu a lot..scroll down four times and press the center button to shuffle my music.
    to switch to the next song i have to press the next button like 5 times.
    i can use it fine that way, but i cant view anything at all.
    is there anyway i can fix the screen?
    its not cracked, broken or leaking.
    thanks.

    oboewan,
    I have the old Classic Nano Ipod and I was having the same problem. The display had actually frozen on the song that had been playing. I could fast forward to the next song and rewind to the previous song, but I could not see what was happening. I tried what you said, *+"Try a reset (flip the hold switch on and off, then hold the Menu and Center buttons one finger on one button, one on the other for 6-8 seconds http://the Apple logo should appear, but this might not be an option for you.)"+ It worked!! My classic Ipod Nano display is working just fine now. I guess I can cancel my appoint with the "Genius" at the Apple Store. You're awesom!! Thanks So Much!!

  • The hold switch on my iPod classic is broken, so basically my iPod is always locked and my iPod is unusable, how can I fix this?

    The hold switch is locking my ipod no matter what side it's on, if I mess with it it will sometimes 'unlock' for about two seconds, but that's about it. Definitely not enough time to find a song to play. Help?

    The hold switch is likely faulty and will need to be replaced.  Apple will exchange your iPod out for a refurbished one of the same size and generation for a flat fee.
    http://www.apple.com/support/ipod/service/prices/
    There are several third party services out there who will actually swap out the lock switch for a new one for a much cheaper cost.
    Otherwise, you can purchase the replacement part and put it in yourself using one of the many guides found online.
    B-rock

Maybe you are looking for

  • Are there any other internet/online channels for Vista media center?

    Hi, I was just wondering if there are any other internet/online channels I can get for Vista Media Center? I only have about 9 at the moment, and would like preferby free ones. I don't have satelite or cable tv so would like online ones, is there any

  • BizTalk AS2 Issue

    Hi, We have setup BizTalk AS2 and we are receiving the following error for the specific send port (on outbound): The adapter failed to transmit message going to send port "" with URL "". It will be retransmitted after the retry interval specified for

  • Touch Screen Icons for dzen2

    Hey guys, touch screens are more and more prominent in the modern computing world so I'm looking for ideas and scripts to make them useful with dzen2. As you might know dzen2 (SVN) does support stackable, clickable areas using the ^ca() command. That

  • UNC Path

    Hi I just installed service pack 10 on my clients' server an now can't run the import package. I can successfully upload and preview the upload file. I even validated and processes my transformation file with the upload file and it ran successfully. 

  • Problems with SM30 Transaction

    Dear sir,        I had created table using SE11 and also create Table Maintenance Generator.  If I open SM30 to maintain table, I could not view all the table fields. With Regards, Baskaran