Nothing works for authorizing my ADE, nothing works for authorizing my ADE on my Mac airbook; used to work fine

Tried installing noew ADE 3.0; tried command-shift-D but don't get a window asking if I want to deauthorize. Help window resets to allow authorization.
Used to work fine for past year.
Changed email to this one I'm logged in with; nothing works. keep getting the bad key error message. Why is there no clean install re-do information?
This really sucks. Jim

Before you go knocking a much better OS than you'd wish to believe, I'm having the SAME problem in XP.
And now, instead of showing up as one Multimedia Audio Controller...
It shows up as like... 20-30 of themMessage Edited by ouT-Phaze on 03-03-200809:02 PM

Similar Messages

What is the Average video creating time for a 3min video on my Mac Air using iMovie?

I have a MId 2013 MacBook Air and it is taking forever for iMovie to Process a 3 min video Vlog... Is this normal?
Thank Guys

Vlog??

I am moving from London to NYC for a year, will i be able to use my iPhone over there and insert a pay as you go sim?

I wondered if anyone can advise me on whether its possible to use my iPhone in NYC by getting a pay as you go sim in the US? Do companies offer pay as you go sims over there as i wont have a credit rating.
Thanks!

The only supported GSM carrier in the US is AT&T. They will not permit the use of pre-paid SIM cards in the iPhone.
You can sign up for monthly post paid service with them and use it just fine (assuming your existing phone is legitimately unlocked).
You can get pre-paid service with T-Mobile or any number of other regional GSM carriers, but not all features of the phone may work properly (or at all).

HT201320 I have a new work email that works fine on my iPhone 5. However the tone and vibration do not work on my phone or iPad for this particular account? It is like it is on silent!! All the features are on for tone / vibration and nothing happens!!!

I have a web based new work email account from my Company that is working fairly well on my iPhone 5 and my iPad 4. However no matter what I do in the settings every email that comes in to both device comes in silent with no tone or vibration. Both devices are working fine and my other personal accounts are also working fine with Tones and Vibrations. I do not understand what is going on. I am on a loud Construction site all day and I need to have that working well. Can you help me out?

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

IPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

iPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Certain web sites try to open a tab for billing or other info. fire fix 3 worked fine , 4 & 5 bring up a box asking how to handle a aspx file and nothing will work. am running XP service pack 3. how do I reload 3 again?

with firefox 3 everything works fine. with 4 and 5 when I try to complete billing info I get a question about how to handle aspx files. nothing works. all I get is a new tab with a blank screen, not data no nothing. When I loaded firefox 4 and had the problem I reinstalled 3 to solve it. I hoped when 5 came along it would include a fix, no such luck. I read many questions about AOL logon that is the same as my problem and have tried all the suggestions with no luck.

What are you expecting when the aspx window comes up, a PDF or a regular web page?
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (it usually worked with Firefox 4) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it?

I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it? Also, its connected via a powered usb hub.

I assume that you are using Mac operating system 10.4.11, as your profile indicates.
The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

My LG G3 has stopped receiving email from my pop3 road runner account. It just has an "updating" message. It worked fine for the first two weeks and nothing now. Any advice?

My LG G3 has stopped receiving email from my pop3 road runner account. It just has an "updating" message. It worked fine for the first two weeks and nothing now. Any advice?

This started about 3 days ago. I could manually push email through in the last few days but can no longer. I have deleted the account and re-entered the settings but I get a message that I cannot connect to the server.

My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot.

My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.

The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.

Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

Never mind my question on the photoshop elements 13 trying to install the camera raw update. It has been taken care of thank goodness!

Hi I have used my macbook pro with miniport to HDM, and it was working fine. Hadnt used it for a month and now when I connect the TV, the screen on the mac goes blue then back to the page but nothing comes up on the TV. Any ideas?

Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??

Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I bought an Apple TV two days ago for a lg tv. We had a blue ray player on one HDTV connection. It was working fine. Unhooked that plugged in the apple and ... Nothing. No Signal. The on light illuminates all cords tight. Do I take it back to store?

I bought an Apple TV two days ago. Followed instructions to hook up and light is on on box. Unplugged working HDTV connection on tv -it has two more unused - and made final Apple TV HDTV connect to tv tight. Flip over from cable and... no signal! Everything else fine blue ray back to same port and works fine. Do I take this back to store for replacement? Might be new cord or Apple TV,
. Tried other ports on tv with no success. Thanks for any suggestions. Oh yes, mountain lion on air up to date on iPad and iPad min...

I would test it with the tv of friends and or relatives to verify it was broken
(I would do that with all such devices before taking them back)

My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249

Iphoto 09 worked fine for a week - NOW NOTHING!!

So I upgraded to Iphoto 09 last week and everything worked fine. This weekend I did the facial recognition process across 40 k photos. It took almost 30 hours but completed the process and yesterday everything seemed to be working just fine.
Today I get this new message "The Photo library needs to be upgraded to work with this version of Iphoto"
Then we get a long wait and the message "examining photo library" followed by an excruciatingly long wait and a new message : YOU cant open your current library with this version - you have made changes using a newer version"
Not true - I am opening the NEWLY loaded version - have checked 5 times or more today
What can I do to fix this please

If the Command-Option technique doesn’t work: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Nothing works for authorizing my ADE, nothing works for authorizing my ADE on my Mac airbook; used to work fine

Similar Messages

Maybe you are looking for