Notice msg: 'book folder' was created

Hi,
After removing the "_" in between words in the Topic Title
field of the Topic Properties dialog box, a "Notice" pop-up window
appears stating the following:
Note that the 'book folder" C:\ (location of
topic)\topic_name.book\, was created to hold the document and its
resources.
I click the OK box to close the Notice window.
I've never seen this message before when removing the
underlines in the Topic title. Is this typical RH behavior or have
I done something wrong to prompt this notice message to appear?
Thanks,
FMnRH

Hey folks, just noticed this thread and would like to tack on
something to Rick's excellent advice.
There's another bug that got buried in all this.
(great emoticon for Halloween!)
FMnRH's first message mentioned that this whole mess started
during the act of renaming topic titles that had underscores.
I call that the "Topic Title Underscore bug" and there is a
fix for it.
Note: I don't think it has anything to do with the ".book
bug" but it is worth fixing the Topic Title bug anyway so it might
be less likely to happen again.
Technical Support and engineering have issued the Topic Title
Underscore fix and you'll find it in the knowledge base (kb402006).
"Title changes to match file name when importing topics into
RoboHelp 6"
http://www.adobe.com/go/kb402006
Since FMnRH is compiling HTML Help, I thought I'd add a
couple more Knowledge Base articles covering RoboHelp 6 issues:
"Generic Windows crash error message when you export
Microsoft HTML Help from Adobe RoboHelp 6" (kb401651)
http://www.adobe.com/go/kb401651
"Error, "Internal error encountered, Failed to generate
WebHelp." when you generate a merged project - Robohelp 6"
(kb401652)
http://www.adobe.com/go/kb401652
Good news: So far, I have not encountered any of these issues
in the new Adobe RoboHelp 7!
Have a happy halloween
john

Similar Messages

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Restoring a book that was created in Lightroom 4

Hi All,
I had created a book in lightroom 4 and having created a pdf had moved the images folder to an external hard drive. Now i want to make some edits given that the print had some color issues. I see the page layout but with the same folder back in the same location from where i had created the book, i still cant get it to populate the images in the book. Any thoughts on where i can look to see what folder was used to pick images for the book? Any meta data that may have some information on what can bring the images back on the book? Currently i see the correct number of pages in the book but they are all blank.
Thanks in advance for all your help.
Regards
Uday

Sure Pieter, here is the original CS2 file
and a PDF of some pages (you can scroll through the file and see what the PDF corresponds to so you can see the arrow directions).
The fonts are Futura Std and Wingdings 3 OTF
Hope you can figure it out from this.
Thanks for any help you can give.
Best,
Joyce

Unable to Sync due to Error Msg: "A folder was specified instead of a file"

When I attempt to sync my iPhone 4, I constantly get the messages listed below. These messages occur even though I have installed iTunes from scratch with no music, apps or photos etc in it, in an attempt to minimise posible sources of error. So the sync is barebones with just my Outlook and bookmarks. While it does sync subsequent to these messages, when I then attempt a resync, it comes up with a new message saying it cannot read the contents and to do a restore. So effectively my phone is now next to useless.
These are the syncing error messages I get:
"The iPhone "Xxx" cannot be synced. A duplicate file name was specified"
"The iPhone "xxx" cannot be synced. A folder was specified instead of a file"
"The iPhone "xxx" cannot be synced. The required file cannot be found"
Presumably these are distinct Apple created messages that have meaing to tech support. I would appreciate if they could respond and let me know what is causing these error messages. It has nothing to do with Photos or photo cache as reported by some people in my case, as I explained above, these messages are occurring on a fresh install of iTunes, with absolutely no refence of any kind to iTunes or Apple on my C drive prior to its installation.

I also have ALL of these error messages running on Windows7 64bit.
Using my previous pc with windows7 32bit it works fine, with no sync issues. iTunes and win7 64 bit is giving me nothing but a headache.
Un-installing iTunes, re-installing iTunes, resetting iPhone as a new device, nothing works. Any help would be very greatly appreciated! Please!

Db file in Replica was created in wrong folder

Hello!
I created db file at \BDB_HOME\BDB_SUBx in Master, but in Replica site db file was created in wrong folder which is BDB_HOME.
Do I miss something than setting path to DatabaseEnvironmentConfig.CreationDir ?
\BDB_HOME
|
-BDB_SUB1
-BDB_SUB2
-BDB_SUB3
FYI
Ver.5.1.19 (HA)
C#
VisualStudio.Net 2010
Thanks,
Osamu

Hi Osamu,
This is a known limitation with BDB HA at the moment. This issue is tracked internally in SR #19041. We hope to fix it, but do not guarantee that it will make it, in the next BDB release, 5.2.
Osamu, if you have access to MOS (MyOracle Support) please consult Note 1250654.1 (Doc ID 1250654.1) -- How to Correctly Replicate a Directory Structure Involving Subdirectories Between Master and Client. This article explains in detail this issue and how to work around it for now.
For reference, to explain the issue in more detail, suppose on the master the environment directory structure looks something like this:
\BDB_ENV_HOME
     \BDB_SUBDIR_1
     - DbFile_1_1.db
     - DbFile_1_2.db
     - DbFile_1_N.db
     \BDB_SUBDIR_2
     - DbFile_2_1.db
     - DbFile_2_2.db
     - DbFile_2_N.db
     \BDB_SUBDIR_M
     - DbFile_M_1.db
     - DbFile_M_2.db
     - DbFile_M_N.dbOn the client site, the environment directory structure will be incorrectly replicated and will look something similar to this (with all database files ending up under one of the subdirectories):
\BDB_ENV_HOME
     \BDB_SUBDIR_1
     \BDB_SUBDIR_2
     \BDB_SUBDIR_M
     - DbFile_1_1.db
     - DbFile_1_2.db
     - DbFile_1_N.db
     - DbFile_2_1.db
     - DbFile_2_2.db
     - DbFile_2_N.db
     - DbFile_M_1.db
     - DbFile_M_2.db
     - DbFile_M_N.dbThe workaround to resolve this issue depends on a manual hot backup. AUTOINIT should be turned off via rep_set_config with DB_REP_CONF_AUTOINIT and 0. Than the client should be bootstrapped with the databases and logs from the master and recovery should be run as described in the Berkeley DB Programmer's Reference Guide, in the Hot failover section.
Basically, copy all the databases, copy the logs, run catastrophic recovery on the new client environment directory, and start the application. By turning off AUTOINIT you might need to take care of handling the REP_JOIN_FAILURE event error.
To summarize, the workaround implies the following actions:
1. On the client environment call DbEnv::rep_set_config like this:
DbEnv::rep_set_config(DB_REP_CONF_AUTOINIT, 0);With the C# API it's something like:
DatabaseEnvironmentConfig envConfig = new DatabaseEnvironmentConfig();
envConfig.RepSystemCfg = new ReplicationConfig();
envConfig.RepSystemCfg.AutoInit = false;
DatabaseEnvironment env = DatabaseEnvironment.Open(envHomeDir, envConfig);or you could use the DatabaseEnvironment's class RepAutoInit property.
2. Handle DB_REP_JOIN_FAILURE on the client environment, which could be returned from DbEnv::rep_process_message. Handling implies setting an event callback function via set_event_notify for DB_EVENT_REP_JOIN_FAILURE like this:
DbEnv::set_event_notify(eventsHandler);where eventsHandler is a callback function that respects this signature:
void (*db_event_fcn)(DB_ENV *dbenv, u_int32_t event, void *event_info)and internally checks to see if event is DB_EVENT_REP_JOIN_FAILURE. If it is, it may trigger copying of the backup files from the master onto the client.
With the C# API you will set an EventNotifyDelegate delegate using the EventNotify property and check the NotificationEvent.
3. Start the client. Because AUTOINIT is turned off, internal init will not be performed, hence it will not remove the directory structure on the client environment.
4. If the event callback function gets notified of the DB_EVENT_REP_JOIN_FAILURE it means that the backup of the master (databases and log files of the master) is required on the client. Take a manual hot backup as per the guidelines in the Hot failover section, and copy the database and log files onto the client; this is something that the event callback function can do, when it handles DB_EVENT_REP_JOIN_FAILURE by using something like rsync to copy the files between the machines.
5. If a backup was copied onto the client, run a catastrophic recovery in the client environment either manually via db_recover -c, or programmatically by specifying the DB_RECOVER_FATAL flag to the client's DbEnv::open call (with the C# API you specify it via RunFatalRecovery)
6. After the catastrophic recovery will have been performed and the client will have started, all the replication synchronization will work as expected, replication messages will be processed correctly, and the directory structure will be maintained.
Regards,
Andrei

Trying to split large library, I exported a folder of 3000 images to a new library. The new library was created with these images, but it still remained in the original library. How can I remove it from the original library while keeping it in the new l

Splitting a library does not remove the folder I moved from the original library. I exported a folder of 3000 images from the original library to a new library. The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?

The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
Exporting a library will create a duplicate of the exported library items. Usually you do this to work on a partial library on another computer and later merge the changed images back. Splitting the library is not the primary purpose of exporting.
If you want to remove the library items that you exported, select them in the source list of the library inspector and delete them (File > Delete Original Images and all Versions). Then empty the Aperture Trash, after checking that you did not trash more than you wanted.
But check, if the backup of your Aperture library is in working condition, and check the exported library carefully, before you do such a massive delete.
Regards
Léonie

I have a new mac book air and somehow iPhoto was installed twice. Also, a second library was created and it became the default library. I attempted to switch to the original library but it won't open. what can I do to revert to the old library?

I have a new mac book air and somehow iPhoto was installed twice. Also, a second library was created and it became the default library. I attempted to switch to the original library but it won't open. what can I do to revert to the old library?

Both iPhotos open to a default library (#2) which has 300+ photos, I attempted to "switch to library" under the file tab in iPhoto and tried to choose "other library" which had most of my photos. When I attempt to open it, it doesn't do anything. I can see it and there are 2 libraries but it won't open.
Have you tried to open your old iPhoto library by double-clicking it directly, instead of using the File menu? That should work, if you are running iPhoto '11 and the library has been created by that version or an older version. DO you get an error message, if you select the library directly in the Finder?
I checked and it is the latest version of iPhoto.
Is it iPhoto '11, version 6.0.5? "Latest version" is ambiguous, because it will depend on your system version.
Where is your iPhoto Library stored?

Hate iTunes 11. Reverted to old version. Now I get error msg when I open that says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes but won't open or play songs. HELP!!!!

Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?

I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..

How to delete a folder in windows , which i was created through SAP

Hi ,
First I was created one folder in windows and through SAP application I downloaded some file into that. After closing all programs(Even SAP LOG off ) also. Now i want to delete that folder.
While deleting it showing error as some other program file or close that program.
That file only possible to delete throgh again F$_FileName FM.
plz give solution to delete that file from windows itself.

hi,
Try to restart your pc then delete the file you want to delete.
I hope it helps.

Applying template to imported topics creates book folder

Applying the template creates a book folder for each topic
(not visible in the Project view, but is visible in Windows
Explorer) and moves the htm file into the folder. No other files
are in the folder.
I am generating webhelp htm files, and providing the
individual htm files to the developer, and the files must be in a
specific folder (the one in which all of these book folders are
created). Manually moving the files back to the correct folder is
not doable - I generate frequently.
This does not seem to happen on all files, but on most. Any
idea what is causing this, and how I can make it stop?
Thanks!

Hello again
Normally, yes. But in this case you actually
want to move the files using Windows Explorer. Actually,
it's really the only real option you have.
Think of it like this. RoboHelp messed with you by moving the
files to an area you can't see from inside RoboHelp. So you have to
mess with it by undoing what it politely did!
You may also wish to consider upgrading to 7. I've never seen
a report of this in 7.
Cheers... Rick

I recently upgraded to ios 6. my apple id was created while i was in india. now i am in singapore. the apple store is not allowing me to upgrade/download apps. i get a "change ur store locaton to in india" msg.. how do i do it?? pls advice

i recently upgraded to ios 6. my apple id was created while i was in india. now i am in singapore. the apple store is not allowing me to upgrade/download apps. i get a "change ur store locaton to in india" msg.. how do i do it?? pls advice

Change country to India
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

Msg says "itunes library cannot be read because it was created by a newer version of itunes". Help!!!

ITunes won't open because it says "Itunes library cannot be read because it was created by a newer version of itunes". I believe this message first appeared when i downloaded the latest version of ITunes (this occurred several months ago...I haven't had iTunes since). I just downloaded iTunes 10.0 hoping that might fix it but it did not. I don't want to have to pay for customer support so I'm really hoping someone can help me. Thank you, Kathy in Scottsdae

I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..

Itunes will not open, message says library was created with earlier version. what now?,

itunes will not open, message says library was created with earlier version. what do i do?

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Itunes will not open; it says it cannot be read because it was created by a newer version. What do I do

itunes will not open; it says it cannot read because it was created by a newer version. HELP!

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

How to include a .lvlib in a build that was created using a custom .dll

I am trying to build an executable in LV2010 that uses a .lvlib that was created using a .dll from Keyence. I have added the .lvlib to the source files as "Always Included" and I have also added all of the .vi files of the library to "Always Included." I still get the error saying "Missing External Function" when running the program. The executable seems to open fine on the development computer but not on a secondary computer. Any ideas?
Solved!
Go to Solution.

...I assumed too quickly that the problem was resolved. By specifying the path I was actually able to open the executable after installing but none of the .dll functions worked. I noticed that when I specified a path on the diagram, the .dll was no longer included in the dependencies and was no longer included in the build. I guess this would explain why none of the functions were working. I copied the .dll over to the path specified on the diagram and it still did not function.
This brings me back to the original problem I was facing. I actually removed the .lvlib. I replaced all of the library vi references with the Call Library Function and deselected the "Specify path on diagram" Boolean. When I do this, the build includes the .dll in the dependencies list and it includes the .dll file in the destination folder of the install. However, when running the executable I get a list of errors that read, "Missing external function …” I have attached an image of this error. This is the same error that occurred when I was using the library, but I thought maybe the library was the cause of the problem, which is why I used the Call Library Function instead.
*I have tried adding the .dll to the support files and I receive the same error when trying to run the executable.
*I have tried adding the .dll to the support files and making it an “always include” in the installer properties under source files. This returns the same error.
I’m really not sure where to go from here. Any help is greatly appreciated!
Attachments:
Call Library Function.jpg ‏56 KB
Error.JPG ‏23 KB

Notice msg: 'book folder' was created

Similar Messages

Maybe you are looking for