Notice when new shortdump in st22

Hi,
we are getting shortdumps when table tsp01 is getting updated. As usual when I ask the users abput what they have done when the error occured they tell me they don´t remember ´cuase that was yesterday.
Is there any chance to receive a notice when a new error occurs, or has anyone every coded a check routine?
Thanx in advance
Ute

Hi,
There's an MTE for this. Have a look at https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/p-r/preconfigured monitors
Have also a look at the web log /people/sap.user72/blog/2004/10/27/bspabap-howto-read-mte-class-values
Eddy

Similar Messages

My photos don't rotate anymore when I flip my phone and I notice a new icon symbol in the upper right corner of the screen that looks like a lock with a 3/4 circle going around it. Any ideas???

My photos don't rotate anymore when I flip my phone and I notice a new icon in the upper right corner that looks like a lock with a 3/4 circle going around it.
Any ideas???
Thanks

A Icons and their meanings are covered in the manual ( orientation lock included)
iPhone User Guide (For iOS 5.1 Software)

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

Late notice when bill is not even due yet? For real?

I would like an answer as to why my 1st bill reflects a late payment notice, when the bill isn't even due until 6/26/15.I would expect this from Time Warner Cable and being new to Comcast, it looks like the same kind of nonsense. Companies should not put a late notice on a bill that is not even due yet. Pay Attention COMCAST. This is insulting to your customers who pay in a timely manner.

@rexsnana
I am sorry for the delay. I have sent you a private message to assist you further.

My 2 year old IPad is not holding acharge as it did when new. What should I do?

My two yeqr old IPad battery is not holding a charge as it did when new. What should I do?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I have noticed a new icon at the right upper corner on my iPad. It looks like a lock with a circular arrow around it.

I have noticed a new icon at the right upper corner on my iPad. It looks like a lock with a circular arrow around it. What does it mean?

This is simply he rotation lock icon showing up. It means that your iPad 2 running iOS 5.5.1 is "locked" in either portrait or landscape mode. This restricts the screen from rotating when you tilt it. This feature can be very useful in certain cases. To disable this feature, simply double tap on the home button to access the multitasking menu. From there, swipe to the right and tap the icon that looks like a lock with a circle around it. Depending on the settings on your iPad, you may have to turn off rotation lock by flipping the switch directly above the volume switch into the opposite position as it is in now. Hope this helped! Reply back if you have any further questions! It was my pleasure to help you today.

Computer slower than when new

hello, i been noticing my mac acts slower than when new. im getting the little spinning color wheel alot now when i hardly ever saw it before. i ran my disk permissions and it seems ok. is there anything else i can do to make it fresh again? thanx 4 help

yes i ran them then and when it seemed slow. i havent added fonts that i know of, but i did add a canon mpc600 printer and it had software that may have included fonts im guessing. i ran permissions after that installation. inet seems like normal speed, im on ethernet cause my airport is the bugged type that 24"s have. works fine awhile then no longer connects for whatever reason. i gave up on wireless after weeks of problems. i ran onyx and i noticed immediatly my external drive opened without the spinning color wheel so i think its fixed now. thank you for your reply.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Update "when new" option in the EO

There are 2 projects, one with Bussiness component and the other with JSP's.
In the EO for an attribute if I set it as updatable "When New" option instead of "Always" or "Never", then it works properly when I test my AM. ie. We can enter a value for his field only at the time of insert. Once we save we can only view the value, we can't update it.
But the problem is in the other project when we run the Insert JSP we cannot enter any value since there is no text field for this attribute.
In the Edit JSP also it is like this. Ofcourse in the Edit JSP it should not allow us to update so the text field should be display only & that is coming correctly but how can it come as a display filed in the Insert JSP ?
In that case there is no difference between setting "Updatable Never" and "Updatable When New".
Please clarify .
Thanks.
null

<BLOCKQUOTE>quote:<HR>Originally posted by JDev Team ():
Hi,
I need to know some more details to know exactly why the field is not appearing.
1. Is this an attribute that was included in your EO when you first created it, or one that you added later?
ARCHANA : This attribute was not included later. It was there when I first created it because it is the "Code" which is the primary key.
2. Is this attribute in the View Object your JSP insert page is based on?
ARCHANA: Yes, It is there in the View Object.
3. Is the View Object your JSP insert page is based on made up of one EO, or is it based on more than one EO?
ARCHANA : The View Object is based on one EO only.
4. In your JSP, you can try adding the following code to see if the attribute field will get displayed:
<jsp:useBean id="RowEditor" class="oracle.jbo.html.databeans.EditCurrentRecord" scope="request">
<%
RowEditor.initialize(application, session , request, response, out, "theModule.theView");
RowEditor.setTargetUrl("theView_SubmitInsertForm.jsp");
RowEditor.createNewRow();
RowEditor.setReleaseApplicationResources(true);
RowEditor.setDisplayAttributes("Attr1,Attr2...");
(enter the names of the attributes you want displayed in the setDisplayAttributes method.
Laura<HR></BLOCKQUOTE>
Actually my JSP has exactly the same code as u have sent. I have included "Code" in my setDisplayAttributes() method also. The label for this attribute appears but adjacent to it there is no text control to type the data when I insert data.
Please explain.
null

Webutil crashes while calling Function in when-new-item-instance-trigger

Hello !
I use Oracle AS 10.1.2 and webutil 1.0.6 and Oracle Forms Developer Version 10.1.2.
When I call the webutilfunctions within a when-button-pressed or post-change trigger, everything works fine.
When I call the webutilfunctions within a when-new-item-instance-trigger i get an error message:
oracle.forms.webutil.file.FileFunctions bean not found.
CLIENT_TEXT_IO.fopen will not work
What are the reasons for this behavior ? How can I solve the problem ?
PLEASE HELP !!!!!!!!

I think that this is well explained in the webutil documentation(pdf).
You cannot use the functions in the initialisation phase of the form, including triggers like When-New-Form-Instance, When-New-Block-Instance,etc...
The workaround is to use a timer to wait the necessary time for the beans to instantiate themselves.
Francois

When-new-form-Instance trigger raised unhandled exception ORA-04062

Hi,
We are facing ORA-04062 (FRM-40735 WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA 04062) while trying to run the first form of our Application.
We are using a PL/SQL LIBRARY(.pll) for forms.
We are using 10G Application Server,10G DB and Oracle 9i Forms.
DB Version----10.1.0.4.0
Application Server--9.0.4.0
During compilation, we are following the below steps:
1. Compile the .pll
2.Compile Forms.
When we are running these compiled version of forms and pll in Development server where we are compiling it,we are not facing any error.
But when we are taking these compiled version of forms and pll to the Production Server,we are getting the above error.
When we are compiling the .pll in Production server, Application runs fine.
But we should not compile form or pll in Production server.
Searching in Metalink(Note:73506.1) , we find a solution that remote_dependency_mode if set to signature this problem may be resolved.
We tried that by chaning ' REMOTE_DEPENDENCIES_MODE=SIGNATURE' in Init.ora file in both Production and Development server.
But the error still persist.
I think the problem is regarding .pll.Because for the time being to test the application,I compiled the pll in Production and we didnot get any error while running the Application.
But whenever we are tring to deploy the compiled version of pll (compiling in Development sever) and to run the application in Production, we are facing the error.
Also, pll calls one standard database package in SYS.That standard package has VALID status both in Production and in Development.
We donot have priviledge to change/compile that package.So,we didnot change anything in that package. We didnot change anything in .pll also.
We are upgrading our forms from 6i to 9i.And now when we are trying to deploy it to Production we are facing ORA-04062 error.
Can anyone please help ?

Exactly what procedure or package in SYS are you calling that causes this problem?
Are both test and production databases at the same version?
Do you know what procedure or package is named in the error? If not, then you need to improve your on-error trigger processing. I use a PLL_On_Error trigger to capture and improve a number of Oracle messages. It is posted here:
 Re: FRM-40735:Pre_Insert trigger raised unhandled exception ORA-20011
Note especially the part near the end that deals with FRM-40735. (Not sure, but you may also want to display DBMS_ERROR_TEXT in your situation.)
If that doesn't help find the actual problem, I would pull out my Re: Zdebug -- Download a Forms debugging message tool, and add messages before every call in the when-new-form-instance process to zero-in on the offending call.
If it really IS a call to a system process, I would then experiment with creating a server-side package or stored procedure that calls the process, and then call that stored procedure from my form. That way, you effectively insulate your form from system differences.

WHEN-NEW-FORM-INSTANCE trigger does not fire

Hi,
Does anyone have any idea why code placed in the when-new-form-instance trigger appears to be ignored when the form is executed from one login but runs fine when executed from another? A breakpoint on the first executable line of code in the trigger confirms that the trigger is not being fired.
Regards,
Ian Dodds.

Hi again Duncan,
I was able to solve it once I ran the form with the Forms Runtime Diagnostics enabled. I had a table in my schema containing old data used to build menu items. This was causing runtime errors to occur during calls to SET_MENU_ITEM_PROPERTY that were not being propagated to the UI so I didn't know they were occuring.
The upshot was that the WHEN-NEW-FORM-INSTANCE trigger was not firing. Once I corrected the data it worked a treat.
Thanks very much for pointing me towards FRD, it's the first time I've used it but it won't be the last.
Cheers,
Ian.

Populate two poplist items on when-new-form-instance trigger

Hello!
I have a simple form with some text-items, datetime items, two poplist items and two buttons (exit and save to database).
Everything works well except the second poplist wont get populated. After wrote the code for the first i just wrote a similar one for the second poplist. Each poplist fetches its data from different tables. Nothing changed when i tried different list-item types (first worked, second didnt).
Here is the code in the when-new-form-instance trigger:
declare
     rg_query_sponsori varchar2(200) := 'select nume, sponsor_id from sponsori';
     rg_id_sponsori recordgroup;
     err_sponsori NUMBER:= 0;
rg_query_portari varchar2(200) := 'select nume, portar_id from portari';
     rg_id_portari recordgroup;
     err_portari NUMBER:= 0;
BEGIN
     rg_id_sponsori := create_group_from_query('recgrp1',rg_query_sponsori);
     err_sponsori := populate_group(rg_id_sponsori);
     clear_list('vizitatori.sponsor_id');
     populate_list('vizitatori.sponsor_id',rg_id_sponsori);
     rg_id_portari := create_group_from_query('recgrp2',rg_query_portari);
     err_portari := populate_group(rg_id_portari);
     clear_list('vizitatori.portar_id');
     populate_list('vizitatori.portar_id',rg_id_portari);
END;
Thx and have a nice weekend :)
Iulian

Try this by adding delete_group
declare
rg_query_sponsori varchar2(200) := 'select nume, sponsor_id from sponsori';
rg_id_sponsori recordgroup;
err_sponsori NUMBER:= 0;
rg_query_portari varchar2(200) := 'select nume, portar_id from portari';
rg_id_portari recordgroup;
err_portari NUMBER:= 0;
BEGIN
rg_id_sponsori := Find_Group('recgrp1');
if not id_null(rg_id_sponsori) then
delete_group('recgrp1');
end if;
rg_id_sponsori := create_group_from_query('recgrp1',rg_query_sponsori);
err_sponsori := populate_group(rg_id_sponsori);
clear_list('vizitatori.sponsor_id');
populate_list('vizitatori.sponsor_id',rg_id_sponsori);
rg_id_portari := Find_Group('recgrp2');
if not id_null(rg_id_portari) then
delete_group('recgrp2');
end if;
rg_id_portari := create_group_from_query('recgrp2',rg_query_portari);
err_portari := populate_group(rg_id_portari);
clear_list('vizitatori.portar_id');
populate_list('vizitatori.portar_id',rg_id_portari);
END;

When-new-record-instance

Hi All !
I have a form, where in
*Trigger:when new form instance*
enter_query;
*Block level Trigger :when-new-record-instance*
:empaply.employeeid:=:global.employeeid;
select employee_id,firstname into :empaply.employeeid,:empaply.employeename
from pim_emplpersonalinfo where employee_id =:global.employeeid;
if :empaply.leavetype='Casual Leave' then
:empaply.status1:='Not Applicable';
:empaply.status2:='Not Applicable';
:empaply.status:='Pending Approval';
elsif :empaply.leavetype='Earn Leave' then
:empaply.status1:='Pending Approval';
:empaply.status2:='Pending Approval';
:empaply.status:='Pending Approval';
elsif :empaply.leavetype='Earn Leave' and :empaply.status='Rejected' then
:empaply.status1:='Not Applicable';
:empaply.status2:='Not Applicable';
elsif :empaply.leavetype='Earn Leave' and :empaply.status1='Rejected' then
:empaply.status2:='Not Applicable';
end if;And for a push button
*Trigger: when button pressed*
execute_query;Now my issue is the initial value i have set in the new record instance is not working automatically, it works when i click any other text box in my form or when i scroll down..
What can i down to overcome this?
Pls help !
Thanks and Regards
user 10685325
Edited by: user10685325 on Jun 22, 2009 1:19 AM

Hai,
The NEW-RECORD-INSTANCE Trigger will work only when the cursor moves to that record.
write in the POST-QUERY Trigger of the block.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

WHEN-NEW-ITEM-INSTANCE TRIGGER NOT FIRING IN FORM PERSONLIZATION

We are upgrading to R12, when-new-item-instance trigger written for radio group not firing. using USO-821 Order Administrator Responsibility the function order capture.After clicking on actions push button
opening Copy Quote for this Form Personalization written.
For Radio Group Copy-Group when-new-item-instance trigger written but this trigger not firing,but In 11i Instance its Firing.
trigger-event: when-new-item-instance
Trigger-object:copy_group
condition:when copy_group='ALL'
Action: showing message.
The same when-new-instance trigger written in form item level and trigger execution hierarchy properties 'OVERRIDE'.
Just I am thinking this overriding by Item level trigger of form.
Please kindly help me quickly .What I need to do?
How can I make trigger to Fire?
Please kindly give solution.....Its very urgent Requirement.pls help me.
Regards,
Basavaraj

Please kindly help me quickly .What I need to do?
> Please kindly give solution.....Its very urgent Requirement.pls help me.
Kindly log a SR for urgent issues.
Thanks,
Hussein

Notice when new shortdump in st22

Similar Messages

Maybe you are looking for