NotifDetailsPG - make Reject not visible

I need to personalize the page NotifDetailsPG - set the Rendered property of the Reject button to false on the Responsibility level.
This button does not appear on the list of the items that are available for personalization.
Any suggestions?
Thanks!
Voytek Wilk

My intended reply before is to suggest you why the reject button is not appearing on list of personalizable components of oaf page as it may be coming from a workflow. I suggested to look for the workflow wether it is coming from workflow or not. once this is clear rest of the logic is yours based on your functionality and corresponding logic flow of the module and workflow. I did not recommended any changes to u r workflow process in my previous reply.
Regards
TRKS

Similar Messages

How to make usr_locale not visible in user profile

Hi all..
Need help for invisible user attribute "usr_locale" I am not want to show this attribute in user preference, how could I do that?
-Thanks-

Have you checked this link:
Section 30.4.9 Showing and Hiding Attributes
Customizing the Interface - 11g Release 2 (11.1.2)

FormMetaData.xml - can't make usr_lock not visible

Hi,
I'm trying to take the AttributeRef of usr_lock out from under the user management from formmetadata.xml. However after i restart jboss and trying to manage->search->view user it gives me a "system error encountered".
Does anyone know why usr_lock can not be taken out of the form display under user management in formmetadata.xml
kind regards,

Hi,
You can remove required field from FormMetaData.xml else it will give you system error.If you want to remove it then you will have to modify jsps to do so.
Regards
Nitesh

Can I set the Increment/Decrement to not visible by default?

The Increment/Decrement attachment to ALL the Numeric controls is a nuisance. Give me a palette that does not have the Increment/Decrement visible by default and my life will be MUCH better. I would not mind clicking on a check box if it was needed.
How can I make it NOT visible by default?
Solved!
Go to Solution.

Thanks,
It took me a while but I got it done! I use the Modern style so it is not that easy as it would be with Silver. I just think Silver looks 'Bloated'.
Now I don't have to turn off that check mark everytime i place a numeric control! YEA

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

UWL Approve Reject button not visible

Hello Experts,
We have implemented Portal 7.0 SP 18 and configured UWL. All task items are appearing correctly.
But approve and reject button is not visible in UWL. The same is visible in ITS screen when we click on the task.
Kindly help.
Regards,
Nirmal Sivakumar G

Hi Soral,
All workflows from ECC is causing this problem. To be precise I have configured a webflow connector to pull the tasks from SAP Inbox. The approve/Reject button should appear in UWL ivew when we select the task item. But only forward and resubmit options are visible.
I guess the problem is with SP 18 itself. Coz there are similar threads with the same scenario in SP 18.
Regards,
Nirmal Sivakumar G

"Make this recurring" check box not visible on Mobile

I have created and successfully used a Donation button for my 501c(3) business.It works great in browsers on laptop and desktop computers.However, the "Make this recurring" check box is not visible on IPhone, IPod, IPad, Android Pad, or Android phone. How can I enable recurring payments on mobile phones?The URL on these devices starts: https : // mobile . paypal . com / us / cgi-bin / webscr ? cmd=_express-checkout-mobile ... Thanks in advance

Louisey,
Welcome to the forums!!
a few questions first...
a, did your site work in MobileMe initially before you purchased your domain name?
b, does it still work if you type in your MobileMe URL rather than the purchased domain name?

How can make PIR in period of adjustment not visible in MD04

Dear guru ,
I have defined a period of adjustment for planned independent requirements.
These pir are visible in MD04 but they arenu2019t influent for mrp.
I want to make these pir not visible in MD04
I donu2019t want to delete the pir because I want to maintain history of planned and withdrawn quantity.
How can I do that ?
Thanks is advance.

Hi,
A suggestion:
Split the requirements into 2 lines (i.e. 2 versions), one line which is active, but does not contain the requirement which you do not want & the other which is not active & contains the reqmt which you do not want in MD04.
Regards,
Vivek

Captivate 6 - Trying to make all click boxes not visible in output

Adobe Captivate 6 - how do you make all the click boxes not visible in output. Help says to uncheck the Visible in Output box, easy enough, then it say to click the Apply to all icon and there is no such icon. Do I have to go through every single slide and manually do each one?

Hello and welcome to the forum,
I think you want to 'hide' the click box, so that it is not active, in the Properties panel? A click box itself is never visible to the user on the stage, but can be active or not.
I always copy/paste an invisible object, it will keep its properties. Since a click box has no style, you cannot apply a style to all click boxes.
Lilybiri

Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
The rest have been given a width of 15em, so this value may be a good start.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
   width: auto;
    background-attachment: fixed;
Just keep the border property and remove the other two.
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;
The following is the original for the above
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;
Cheers,
Gramps

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

[SOLVED]systemd and make a camera visible GUI-wise in your filemanager

After reading a lot about systemd in the wiki and in this forum I understand there are different opionons about systemd. Anyway, I have a adapted all the changes to rc.conf leaving out only a few daemons to start there. So why not give systemd a try? If you dont want to read the full posting I finally got it to work, basically by reading carefully and checking the suggested tests in the systemd wiki. (loginctl)
As suggested by the wiki, I tried the systemd yesterday. Enabled via systemctl some services to "replace" my rc.conf daemons. I got what I thought everything to work, including autologin directly to my Xfce4 desktop. Everything except the digital camera.
When starting Arch traditionally via initscripts I immediately can see the camera in the filemanager (Nautilus) when the camera is attached via USB.
Some minutes later, after adding "init=/usr/lib/systemd/systemd" to the APPEND line in Syslinux and rebooting, my machine reboots
fine.But when connecting the camera again it is not visible graphically.
The camera is there because when using gphoto2 (the commandline) as root I can transfer pictures etc.
Even if I am no happy CLI user I can handle it when necessary. Handling pictures a graphical view of them is much easier...
As the wiki about systemd says one can try it out. I have not removed anything from the system and when starting Arch again, the initscript way, I can see the camera again in my filemanager, gthumb works again and pictures can be transferred to my machine.
In the wiki again, this time about digital cameras
Permission issues
Camera devices should be granted permission using ACLs. For this to work, users need to have consolekit or systemd running and the user session must be registered with them accordingly.
Check this using /usr/bin/ck-list-sessions to verify a value of "TRUE" should be returned for both the "active" and "is-local" fields:
$ ck-list-sessions | grep TRUE
active = TRUE
is-local = TRUE
ACL=Atlantic Container Line is what first comes into my mind. I have had some connections to transport business...I admit I had to google it to find the correct interpretation of this mumbo-jumbo.
The wiki also gives a "hint", if this is not working try to use the obsolete camera group and edit some udev rules.
Should not be necessary when it has worked before systemd and earlier experiences
But what is this about "Permission issues"? Here is my listings relative the wiki hints. All seems OK.. or why the heck are there two sessions??
[leif@krasaki ~]$ ck-list-sessions | grep TRUE
is-local = TRUE
active = TRUE
is-local = TRUE
[leif@krasaki ~]$ ck-list-sessions
Session1:
unix-user = '1000'
realname = '(null)'
seat = 'Seat1'
session-type = ''
active = FALSE
x11-display = ''
x11-display-device = ''
display-device = '/dev/tty1'
remote-host-name = ''
is-local = TRUE
on-since = '2012-10-24T07:12:56.499847Z'
login-session-id = '1'
idle-since-hint = '2012-10-24T07:13:26.994037Z'
Session2:
unix-user = '1000'
realname = '(null)'
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0'
x11-display-device = '/dev/tty7'
display-device = '/dev/tty1'
remote-host-name = ''
is-local = TRUE
on-since = '2012-10-24T07:13:02.361157Z'
login-session-id = '1'
[leif@krasaki ~]$
As one can see, the ACTIVE values are here as the wiki says. But no camera. Those values are the same, wheter which way the machine is started. But 2 sessions??
Further reading in the systemd wiki article and consolekit vs systemd.logind gives a clue.
From the wiki:
In order to check the status of your user session, you can use loginctl. To see if your user session is properly set up, check if the following command contains Active=yes. All polkit actions like suspending the system or mounting external drives with Udisks should then work automatically.
So when started via systemd and running logintctl, it gives this surprising result. Does not matter wheter as normal user, nor as root....
[leif@krasaki ~]$ loginctl
SESSION UID USER SEAT
1 1000 leif seat0
1 sessions listed.
[leif@krasaki ~]$ loginctl show-session 1
Id=1
Timestamp=Wed, 24 Oct 2012 10:57:03 +0200
TimestampMonotonic=20040019
DefaultControlGroup=name=systemd:/user/leif/1
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=315
Audit=1
Type=tty
Class=user
Active=no
State=online
KillProcesses=no
IdleHint=yes
IdleSinceHint=1351069009642296
IdleSinceHintMonotonic=6664433
Name=leif
[leif@krasaki ~]$
Surprising? Should it not have been Active=Yes? So something is wrong in my settings although it had worked "before" starting using systemd..
OK, so far. Lost? Not yet. Double check again everything and I found the culprit, my ~/.bash_profile which had worked before seemed a bit different to what is suggested in the wiki. The old one, actually started 2 sessions, as also could be seen here above checking ck-list-sessions. That was the problem
Using a fresh edited ~/.bash_profile as suggested here, the camera is visible graphically
Finally, just for fun, start again the old initscipt way. Enabling daemon and so on. Still 2 sessions going on....Here it was the "/.xinitrc, which also had some old fashions and I removed the ck-launch-session from the exec line. So even here, now only 1 session..
Anyway, now the camera is visible, both starting with initscripts, naturally also some daemons active in rc.conf and by starting with systemd.
I rest my case and it seems systemd works with everything on my machine which is just a normal desktop used by an old man.
Thanks for reading...

Solved now! Boot times are as fast as posssible on my HDD I think. Only thing after uninstalling initscripst and initscripts-systemd was that locale was not set inspite of a correct /etc/locale.conf. I had to make /etc/profile.d/locale.sh with this content;
if [ -s /etc/locale.conf ]; then
. /etc/locale.conf
fi
export LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE
export LC_MONETARY LC_MESSAGES LC_PAPER LC_NAME LC_ADDRESS
export LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION

The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

How do I fix my left shift key? Any open windows leave and make the desktop visible.

How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.

You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium

I desperately need to access my User Library folder in Time Machine (Lion so = not visible).

Hi. I installed Lion a few months ago and got a new external drive to back up Time Machine.
Nobody told me the User Library would be made hidden in the new OS. I have been backing up regularly in the belief that all my work, settings and so on was safe.
Yesterday my iMac (27" 2.8 Ghz Core it with 4 gib memory) suddenly went mad. Message saying finder had quit whilst trying to restore windows. Desktop was flashing, no icons clickable, no external disks readable. Could access some progs and terminal, but nothing else. Could not get into the history folder to trash various plists and so on as the folder is hidden and the alt Go wouldn't work. The Finder just wouldn't do anything.
I have sorted it out BUT I have lost my address book entries, my browser booksmarks, my desktop shortcuts and my iCal entries. I need to access my User Library on my Time Machine. Is there a way?
I cannot believe I have been religiously backing up my stuff but Apple has made it so I can't access my backup of one of the most important folders on my Time Machine???
Is there anyway of getting into this from Terminal or something? I will never be able to get back all the bookmarks and stuff I've been researching for years. I have it backed up on two different hard drives, both of which have 'invisible' library folders. I have make the folder visible now, for future backups, but it's after the horse has bolted. I am furious, and just feel like bursting into tears because of all the time it's going to take me to get all my work back. I can't tell you how stupid this was, Apple.
If someone could help I'd be really grateful. I've got older backups but they are so old they won't get back my recent stuff.
Thanks.

select Finder
hole option key and select Go in the menu
Select Library
Enter Time Machine
You should be seeing all the versions of you Library folder.

NotifDetailsPG - make Reject not visible

Similar Messages

Maybe you are looking for