Notification not changing when in holster

My only problem so far is that my handset is not properly following the settings for ring / vibrate on "Normal" when in the holster. I'm pretty familiar with configuring this thing, and have tried to reset everything several times. Didn't have this issue on my World Edition. Think that perhaps there is a problem either with my phone or with my holster's magnetic switch. Any thoughts?

My 9630 goes in to vibrate/silent mode when in the holster or a dark pocket. I view this as a very cool feature, not a bug. I haven't seen a setting to control this behavior yet.

Similar Messages

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Visited link color is not changing when there is no page redirection

Visited link color is not changing when i just open a popup on clicking the hyperlink.. whereas visited link color gets changed when i redirect to a new page on clicking the hyperlink
I want to have my visited link color to change even if i show a popup on clicking the hyperlink
This works fine with IE..

Hi,
Have a look at the user status table TSOCM_STAT_PROP and see if there are any unwanted PROCESS_TYPE <> STSMA combinations.
For your process type there should only be one kind of status schema assigned.

Colors in parade do not change when I move the Temperature slider.

I am trying to do the speed grade tutorial, but the color does not change when I move the temperature slider.

It might be nice to know which "issue" of Sg you're using.There have been issues where the colors "lag" while using a slider/control, but typically when you let "up" on the control, the adjustment is "there". From your comment, am I correct in assuming that the controls simply don't do anything even after you've moved them? And of course ... when you "move" them, you do see the indicator on the slider-line move, right?
Neil

The display on my iPhone only works vertically. It will not change when I rotate my phone.

The display on my iPhone only works vertically. It will not change when I rotate my phone.

Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
Not all apps support orientation changes, BTW.

Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

zedzed,
Here's another thought.
Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
To duplicate the file, click once to highlight it. Press the Command + D keys.
Drag the History,plist copy file to the Desktop.
Highlight it. Press the Command + I keys, to get info.
Change Open With to TextEdit.
When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
ali b

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Why is the video on my phone not changing when i flip my phone?

I have the iphone 5 and ever since i updated it with the new os , the videos on my phone dont change when i change the position of my phone. i have tried to restore it as well but still the same. earlier i used to be able to change the position of my screen. please help.

Hey there Sparkly3gs,
It sounds like your camera is not rotating as expected in the camera app. I want to recommend starting by quitting the running apps on the phone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
I would suggest before restoring from your backup setup the device as new and make sure the camera functions as expected. Then restore from your backup and verify it still works.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Presence status not changed when using Lync 2010 Remote Call Control

Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
Martin

I think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Tabset in page fragment , the url does not changes when we select tabs...

Hi
Thank you for reading my post.
i noticed that when we use a tabSet in a page fragment , selecting tabs does not change the current URL ,
is it a correct manner ? I think when we select a tab and it opens another page the url should change.

HI,
There is a relevant topic on EA discussion.
Topic :TabSet in page fragment , selecting a tab open a page but does not change the current browset url
https://feedbackprograms.sun.com/project/forum/thread.html?cap={3F4DA363-16D3-4D4C-920C-992ECB054B6D}&forid={CC6B8562-F896-4A44-ACB6-4684BDD05E19}&topid={361DBDF0-FFDE-4618-9FC6-86E4903A9565}
Hope this helps.
Please post messages related to Creator 2 EA at the feedbacks programs portal. The URL is:
https://feedbackprograms.sun.com/login.html
Thanks,
RK.

Menubar not changing when app changes.

Sometimes when I switch applications, the menubar does not change to the menubar of the current application. The actual menu items are there, but what I see is the previous app's text menus.
It seems most often it is Finder's menu that I see instead of the application I switched too. The most frequent applications that seem to trigger this issue are Chrome and Mail.
This is on a Mac Pro with OSX Lion.
Has anyone else seen this behavior?
As far as I can tell this started happening this spring some time, not exactly sure when. I've gone through the usual diagnostics and fixes and so far can't find out what is happening. There are no errors that seem relevant in the logs at the times when this happens.
Usually switching apps a couple of times fixes the issue.

In Crystal, the parameters and filters are defined separately.
Let's say you have defined a parameter - "Country". You could see this paramter in the list of parameters.
When you run the report, the prompt will appear for input values. Even though the values are provided, it won't apply as a filter to the report query unless you specify manually.
So, Go to select expert and select a variable on which you want to apply the condition. You should assign this prompt value in place of condition corresponding to this variable.
Hope this helps!

BOM item qty does not change when header qty changes in Outbound Delivery

Hi,
We are using sales BOM and exploding it in Sales Order. ( Item category of components as TAE )
I am creating a delivery with reference to a sales oder ( i have maintained copy controls to copy header and item data). Now when i change BOM header quantity in delivery document system is not redeterming the components quantity , item quantity of the components does not change.
Please let me how can i control item qunatity when BOM heade quantity changes in outbound delivery document
Thanks
Venkata Rama Reddy.K

Hello Venkata,
The components item category is TAE, that means the item category for the header item will be TAQ. Also the pricing will be carried out at the header item level only.
Now for your query:
The standard item category controls of TAQ will not have any connection between the header & the item level quantities in the delivery. If you change the quantity of the header item in the sales order, the quantity of the compnenets will be automatically adjusted. But this will not happen in the delivery with the normal settings of TAQ.
Solution:
Go to transaction code VOV7 - select TAQ - double click - In the Bill of Material/Configuration section , there is a field "Create Delivery Group" - select "X - Form delivery group with one delivery date".
Save the settings. Now create a new sales order & then create the delivery & try to change the quantity of the header item, the system will automatically change the quantity of the components. (the system may not change the quantity of the components in the delivery of the old sales order - change it manually)
With best regards,
Allabaqsh Patil.
Idhasoft Ltd.

Cursor does not change when hovering over pop-up window link

I created a text link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code.This was done in CS3. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

Notificati​on not changing when in holster

Similar Messages

Maybe you are looking for

Notification not changing when in holster