Notification and Control Center does not show

Hi,
Sometimes (I don't know exactly under which circumstances) on my iPhone 4 (iOS 7.0.2), Notification and Control Center won't appear with swipe gestrue.
In this situation, When iPhone is locked and a notification (like message or phone call) arrives, the screen ALWAYS shows that notification and the screen is always on, until I arraive and lock it manually !! The second one is a serious problem beacuse after some hours the battery drops dramatically.
ONLY a reboot solves this probelm.
Is there any solution to this topic rather than reboot?

Same problem! I have a 4 though so maybe that's the problem? What iphone do you have?

Similar Messages

After updating to iOS 8 notification and control center won't open when unlocked

Ever since I updated my iPhone 5s to iOS 8, the notification and control center will not open while my phone is unlocked. I checked to see if I had it disabled in settings and it turns out I did not. I switched the Access Within Apps as well as the Access While Locked on and off anyway but still nothing. I can only pull the notification and control center open while my phone is locked... it is extremely annoying. I know I'm not the only one though because my friend who updated to iOS 8 on his 5c was having the exact same problems. Some help would be much appreciated. Thank you!

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

HT4352 appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

Core Center does not show up!

HI Guys,
I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
MSI 875P NEO-FIS2R with 1.8 bios
Can anyone help me out? I don't understand

I found it !!!!
The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

Flash control skin does not show in Golive

Mac OS 10.4.11 GoLive CS (1) - I have a flash file (.flv) that works well - see initial test without an applied skin - http://www.artdesign.org.uk/test - but with a couple of problems for the actual replacement intended for the correct site.
Problem 1. The controls skin I attached to the yell_video.flv when converting to a yell_video.swf in Adobe Flash program does not show in Golive, as the actual video does not show either I assume this is normal. I have the 3 files sitting in the 'web content/graphics' folder on the site - yell_video.flv - yell_video.swf - SkinUnderAll.swf - but can not see a means of 'attaching' the skin file to any field in the Inspector Palette. When I run it in a browser the error message comes up, with a dismiss or continue option, click either and the video plays fine but without the skin.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: SkinUnderAll.swf"]
Problem 2. When the site is first encountered as a user there is a momentary white box where the flash yell_video.swf sits. I have made sure that when converting the .flv file in the Flash program I made the background the exactly same colour as the web page it sits on. The white is then momentarily followed by the blue colour that is not quite the same as the page background I stipulated.

After much messing around I have found a solution to one of my own problems.
The SkinUnderPlayStopSeekMuteVol.swf file generated from the exporting of the Flash yell_video.swf from the yell_video.flv file should sit in the same folder as the html page the video has been inserted in. In my case I had all 3 files in a folder entitled 'graphics' which is what caused the problem.
I still have a problem with the momentary white box where the flash yell_video.swf sits when first opening the site.

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

CC app has a yellow and blue shield on it and the app does not show all my apps.

When I click on the app, it does not show all assets I have and does not show the listing of all the assets and their status. How can I correct this? Vij

Hi Vij,
Kindly share the below mentioned details, so that we can try to assist you with this.
OS version:
Screenshot of the app:
Thanks,
Atul Saini

I have Elements 12 and editing toolbar does not show trying to fix pet eye

i watched the video on how to remove pet eye and the video shows a tool bar on the left for editing, including checking pet eye box. This does not show on my elements nor does it look like the video. Please help.
Thanks.

ziemski wrote:
under rectangular marquee
That means you have the rectangular marquee tool selected and not the red eye tool.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

TMS conference control center does not populate Conductor Conferences

Hello,
We have just recently upgraded to conductors running 3.01 and all TPS to 4.1. TMS is running 14.5 with TMSPE on 1.3. After the upgrade to 3.01 TMS no longer sees any conferences managed by the conductors. Previously on 2.4.1 this worked without issue. All systems have been booted and had services restarted and yet we have nothing. All other conferences show, including our 8510, 8710 and regular point to point. Only conductor does not show. Anyone else have this happen?
Thanks,
Liam

I would rather not upgrade until TMS 14.6 is proven not to have major bugs (like 14.0 which caused a lot of havoc for me). I did no see requirements for 3.01 to be on 14.6 so this should all technically still work, at least by Cisco's documentation. In previous upgrades it took about a day for these conferences to come back so I did not think anything of it until I came back in this week and they still did not show. Since I have rebooted, restarted all services, verified that all versions are compatible and still nothing.

Swipe down/up for notification and controle center stop working

Hi guys,
I got today my new IPhone 6+ running iOS 8.0.2 and after a while the swipe up gesture for the control center and also the swipe down gesture for the notification center stops working on the home screen and in apps.
On the lockscreen the gestures still working.
It happend now 3 Times today but I can´t see any System behind this.
And it happens also that the System freezes some times for a few seconds, I saw it happen In safari and mail app.
Hope these are only bugs in iOS which will be solved soon.

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

Control panel does not show the home page when Newsstand app is open - could this be a bug?

When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?

Zephuros2000 wrote:
I press the home button twice to access the control panel ...
Pressing the home button twice does not access the control panel ... at any time.
To access the control panel, press the home button once to get to the home screen. Then swipe up from down near the home button to view the control panel.
Pressing the home button twice generally shows you the apps that are running.

Notification and Control Center does not show

Similar Messages

Maybe you are looking for